Merge remote-tracking branch 'upstream/master'

94 files changed, 11916 insertions, 494 deletions

diff --git a/asymptotic-notation.html.markdown b/asymptotic-notation.html.markdown
index a516737e..a23ef1c8 100644
--- a/asymptotic-notation.html.markdown
+++ b/asymptotic-notation.html.markdown
@@ -3,41 +3,52 @@ category: Algorithms & Data Structures
 name: Asymptotic Notation
 contributors:
     - ["Jake Prather", "http://github.com/JakeHP"]
+    - ["Divay Prakash", "http://github.com/divayprakash"]
 ---
 
 # Asymptotic Notations
 
 ## What are they?
 
-Asymptotic Notations are languages that allow us to analyze an algorithm's running time by
-identifying its behavior as the input size for the algorithm increases. This is also known as
-an algorithm's growth rate. Does the algorithm suddenly become incredibly slow when the input
-size grows? Does it mostly maintain its quick run time as the input size increases?
-Asymptotic Notation gives us the ability to answer these questions.
+Asymptotic Notations are languages that allow us to analyze an algorithm's 
+running time by identifying its behavior as the input size for the algorithm 
+increases. This is also known as an algorithm's growth rate. Does the 
+algorithm suddenly become incredibly slow when the input size grows? Does it 
+mostly maintain its quick run time as the input size increases? Asymptotic 
+Notation gives us the ability to answer these questions.
 
 ## Are there alternatives to answering these questions?
 
-One way would be to count the number of primitive operations at different input sizes.
-Though this is a valid solution, the amount of work this takes for even simple algorithms
-does not justify its use.
+One way would be to count the number of primitive operations at different 
+input sizes. Though this is a valid solution, the amount of work this takes 
+for even simple algorithms does not justify its use.
 
-Another way is to physically measure the amount of time an algorithm takes to complete
-given different input sizes. However, the accuracy and relativity (times obtained would
-only be relative to the machine they were computed on) of this method is bound to
-environmental variables such as computer hardware specifications, processing power, etc.
+Another way is to physically measure the amount of time an algorithm takes to 
+complete given different input sizes. However, the accuracy and relativity 
+(times obtained would only be relative to the machine they were computed on) 
+of this method is bound to environmental variables such as computer hardware 
+specifications, processing power, etc.
 
 ## Types of Asymptotic Notation
 
-In the first section of this doc we described how an Asymptotic Notation identifies the
-behavior of an algorithm as the input size changes. Let us imagine an algorithm as a function
-f, n as the input size, and f(n) being the running time. So for a given algorithm f, with input
-size n you get some resultant run time f(n). This results in a graph where the Y axis is the
-runtime, X axis is the input size, and plot points are the resultants of the amount of time
-for a given input size.
-
-You can label a function, or algorithm, with an Asymptotic Notation in many different ways.
-Some examples are, you can describe an algorithm by its best case, worse case, or equivalent case.
-The most common is to analyze an algorithm by its worst case. You typically don't evaluate by best case because those conditions aren't what you're planning for. A very good example of this is sorting algorithms; specifically, adding elements to a tree structure. Best case for most algorithms could be as low as a single operation. However, in most cases, the element you're adding will need to be sorted appropriately through the tree, which could mean examining an entire branch. This is the worst case, and this is what we plan for.
+In the first section of this doc we described how an Asymptotic Notation 
+identifies the behavior of an algorithm as the input size changes. Let us 
+imagine an algorithm as a function f, n as the input size, and f(n) being 
+the running time. So for a given algorithm f, with input size n you get 
+some resultant run time f(n). This results in a graph where the Y axis is the 
+runtime, X axis is the input size, and plot points are the resultants of the 
+amount of time for a given input size.
+
+You can label a function, or algorithm, with an Asymptotic Notation in many 
+different ways. Some examples are, you can describe an algorithm by its best 
+case, worse case, or equivalent case. The most common is to analyze an 
+algorithm by its worst case. You typically don't evaluate by best case because 
+those conditions aren't what you're planning for. A very good example of this 
+is sorting algorithms; specifically, adding elements to a tree structure. Best 
+case for most algorithms could be as low as a single operation. However, in 
+most cases, the element you're adding will need to be sorted appropriately 
+through the tree, which could mean examining an entire branch. This is the 
+worst case, and this is what we plan for.
 
 ### Types of functions, limits, and simplification
 
@@ -45,16 +56,25 @@ The most common is to analyze an algorithm by its worst case. You typically don'
 Logarithmic Function - log n
 Linear Function - an + b
 Quadratic Function - an^2 + bn + c
-Polynomial Function - an^z + . . . + an^2 + a*n^1 + a*n^0, where z is some constant
+Polynomial Function - an^z + . . . + an^2 + a*n^1 + a*n^0, where z is some 
+constant
 Exponential Function - a^n, where a is some constant
 ```
 
-These are some basic function growth classifications used in various notations. The list starts at the slowest growing function (logarithmic, fastest execution time) and goes on to the fastest growing (exponential, slowest execution time). Notice that as 'n', or the input, increases in each of those functions, the result clearly increases much quicker in quadratic, polynomial, and exponential, compared to logarithmic and linear.
-
-One extremely important note is that for the notations about to be discussed you should do your best to use simplest terms. This means to disregard constants, and lower order terms, because as the input size (or n in our f(n)
-example) increases to infinity (mathematical limits), the lower order terms and constants are of little
-to no importance. That being said, if you have constants that are 2^9001, or some other ridiculous,
-unimaginable amount, realize that simplifying will skew your notation accuracy.
+These are some basic function growth classifications used in various 
+notations. The list starts at the slowest growing function (logarithmic, 
+fastest execution time) and goes on to the fastest growing (exponential, 
+slowest execution time). Notice that as 'n', or the input, increases in each 
+of those functions, the result clearly increases much quicker in quadratic, 
+polynomial, and exponential, compared to logarithmic and linear.
+
+One extremely important note is that for the notations about to be discussed 
+you should do your best to use simplest terms. This means to disregard 
+constants, and lower order terms, because as the input size (or n in our f(n) 
+example) increases to infinity (mathematical limits), the lower order terms 
+and constants are of little to no importance. That being said, if you have 
+constants that are 2^9001, or some other ridiculous, unimaginable amount, 
+realize that simplifying will skew your notation accuracy.
 
 Since we want simplest form, lets modify our table a bit...
 
@@ -67,10 +87,13 @@ Exponential - a^n, where a is some constant
 ```
 
 ### Big-O
-Big-O, commonly written as O, is an Asymptotic Notation for the worst case, or ceiling of growth
-for a given function. Say `f(n)` is your algorithm runtime, and `g(n)` is an arbitrary time complexity
-you are trying to relate to your algorithm. `f(n)` is O(g(n)), if for any real constant c (c > 0),
-`f(n)` <= `c g(n)` for every input size n (n > 0).
+Big-O, commonly written as **O**, is an Asymptotic Notation for the worst 
+case, or ceiling of growth for a given function. It provides us with an 
+_**asymptotic upper bound**_ for the growth rate of runtime of an algorithm.
+Say `f(n)` is your algorithm runtime, and `g(n)` is an arbitrary time 
+complexity you are trying to relate to your algorithm. `f(n)` is O(g(n)), if 
+for some real constant c (c > 0), `f(n)` <= `c g(n)` for every input size 
+n (n > 0).
 
 *Example 1*
 
@@ -114,19 +137,62 @@ Is there some constant c that satisfies this for all n?
 No, there isn't. `f(n)` is NOT O(g(n)).
 
 ### Big-Omega
-Big-Omega, commonly written as Ω, is an Asymptotic Notation for the best case, or a floor growth rate
-for a given function.
+Big-Omega, commonly written as **Ω**, is an Asymptotic Notation for the best 
+case, or a floor growth rate for a given function. It provides us with an 
+_**asymptotic lower bound**_ for the growth rate of runtime of an algorithm.
+
+`f(n)` is Ω(g(n)), if for some real constant c (c > 0), `f(n)` is >= `c g(n)` 
+for every input size n (n > 0).
+
+### Note
+
+The asymptotic growth rates provided by big-O and big-omega notation may or 
+may not be asymptotically tight. Thus we use small-o and small-omega notation 
+to denote bounds that are not asymptotically tight. 
+
+### Small-o
+Small-o, commonly written as **o**, is an Asymptotic Notation to denote the 
+upper bound (that is not asymptotically tight) on the growth rate of runtime 
+of an algorithm.
+
+`f(n)` is o(g(n)), if for any real constant c (c > 0), `f(n)` is < `c g(n)` 
+for every input size n (n > 0).
+
+The definitions of O-notation and o-notation are similar. The main difference 
+is that in f(n) = O(g(n)), the bound f(n) <= g(n) holds for _**some**_ 
+constant c > 0, but in f(n) = o(g(n)), the bound f(n) < c g(n) holds for 
+_**all**_ constants c > 0.
+
+### Small-omega
+Small-omega, commonly written as **ω**, is an Asymptotic Notation to denote 
+the lower bound (that is not asymptotically tight) on the growth rate of 
+runtime of an algorithm.
+
+`f(n)` is ω(g(n)), if for any real constant c (c > 0), `f(n)` is > `c g(n)` 
+for every input size n (n > 0).
+
+The definitions of Ω-notation and ω-notation are similar. The main difference 
+is that in f(n) = Ω(g(n)), the bound f(n) >= g(n) holds for _**some**_ 
+constant c > 0, but in f(n) = ω(g(n)), the bound f(n) > c g(n) holds for 
+_**all**_ constants c > 0.
+
+### Theta
+Theta, commonly written as **Θ**, is an Asymptotic Notation to denote the 
+_**asymptotically tight bound**_ on the growth rate of runtime of an algorithm. 
+
+`f(n)` is Θ(g(n)), if for some real constants c1, c2 (c1 > 0, c2 > 0), 
+`c1 g(n)` is < `f(n)` is < `c2 g(n)` for every input size n (n > 0).
 
-`f(n)` is Ω(g(n)), if for any real constant c (c > 0), `f(n)` is >= `c g(n)` for every input size n (n > 0).
+∴ `f(n)` is Θ(g(n)) implies `f(n)` is O(g(n)) as well as `f(n)` is Ω(g(n)).
 
-Feel free to head over to additional resources for examples on this. Big-O is the primary notation used
-for general algorithm time complexity.
+Feel free to head over to additional resources for examples on this. Big-O 
+is the primary notation use for general algorithm time complexity.
 
 ### Ending Notes
-It's hard to keep this kind of topic short, and you should definitely go through the books and online
-resources listed. They go into much greater depth with definitions and examples.
-More where x='Algorithms & Data Structures' is on its way; we'll have a doc up on analyzing actual
-code examples soon.
+It's hard to keep this kind of topic short, and you should definitely go 
+through the books and online resources listed. They go into much greater depth 
+with definitions and examples. More where x='Algorithms & Data Structures' is 
+on its way; we'll have a doc up on analyzing actual code examples soon.
 
 ## Books
 
@@ -137,3 +203,4 @@ code examples soon.
 
 * [MIT](http://web.mit.edu/16.070/www/lecture/big_o.pdf)
 * [KhanAcademy](https://www.khanacademy.org/computing/computer-science/algorithms/asymptotic-notation/a/asymptotic-notation)
+* [Big-O Cheatsheet](http://bigocheatsheet.com/) - common structures, operations, and algorithms, ranked by complexity.
diff --git a/bash.html.markdown b/bash.html.markdown
index bd2d5984..f3c9cccc 100644
--- a/bash.html.markdown
+++ b/bash.html.markdown
@@ -130,6 +130,15 @@ ls -l # Lists every file and directory on a separate line
 # .txt files in the current directory:
 ls -l | grep "\.txt"
 
+# Since bash works in the context of a current directory, you might want to 
+# run your command in some other directory. We have cd for changing location:
+cd ~    # change to home directory
+cd ..   # go up one directory
+        # (^^say, from /home/username/Downloads to /home/username)
+cd /home/username/Documents   # change to specified directory
+cd ~/Documents/..    # still in home directory..isn't it??
+
+
 # You can redirect command input and output (stdin, stdout, and stderr).
 # Read from stdin until ^EOF$ and overwrite hello.py with the lines
 # between "EOF":
diff --git a/c.html.markdown b/c.html.markdown
index d4ff529d..7c9dd590 100644
--- a/c.html.markdown
+++ b/c.html.markdown
@@ -36,7 +36,6 @@ Multi-line comments don't nest /* Be careful */  // comment ends on this line...
 enum days {SUN = 1, MON, TUE, WED, THU, FRI, SAT};
 // MON gets 2 automatically, TUE gets 3, etc.
 
-
 // Import headers with #include
 #include <stdlib.h>
 #include <stdio.h>
@@ -114,7 +113,6 @@ int main (int argc, char** argv)
   // sizeof(obj) yields the size of the expression (variable, literal, etc.).
   printf("%zu\n", sizeof(int)); // => 4 (on most machines with 4-byte words)
 
-
   // If the argument of the `sizeof` operator is an expression, then its argument
   // is not evaluated (except VLAs (see below)).
   // The value it yields in this case is a compile-time constant.
@@ -130,7 +128,6 @@ int main (int argc, char** argv)
   int my_int_array[20]; // This array occupies 4 * 20 = 80 bytes
   // (assuming 4-byte words)
 
-
   // You can initialize an array to 0 thusly:
   char my_array[20] = {0};
 
@@ -347,7 +344,6 @@ int main (int argc, char** argv)
   this will print out "Error occured at i = 52 & j = 99."
   */
 
-
   ///////////////////////////////////////
   // Typecasting
   ///////////////////////////////////////
@@ -386,7 +382,6 @@ int main (int argc, char** argv)
   // (%p formats an object pointer of type void *)
   // => Prints some address in memory;
 
-
   // Pointers start with * in their declaration
   int *px, not_a_pointer; // px is a pointer to an int
   px = &x; // Stores the address of x in px
@@ -432,7 +427,6 @@ int main (int argc, char** argv)
   printf("%zu, %zu\n", sizeof arraythethird, sizeof ptr);
   // probably prints "40, 4" or "40, 8"
 
-
   // Pointers are incremented and decremented based on their type
   // (this is called pointer arithmetic)
   printf("%d\n", *(x_ptr + 1)); // => Prints 19
@@ -578,8 +572,6 @@ void testFunc2() {
 }
 //**You may also declare functions as static to make them private**
 
-
-
 ///////////////////////////////////////
 // User-defined types and structs
 ///////////////////////////////////////
@@ -696,6 +688,7 @@ typedef void (*my_fnp_type)(char *);
 "%o";    // octal
 "%%";    // prints %
 */
+
 ///////////////////////////////////////
 // Order of Evaluation
 ///////////////////////////////////////
@@ -786,4 +779,4 @@ Readable code is better than clever code and fast code. For a good, sane coding
 
 Other than that, Google is your friend.
 
-[1] http://stackoverflow.com/questions/119123/why-isnt-sizeof-for-a-struct-equal-to-the-sum-of-sizeof-of-each-member
+[1] http://stackoverflow.com/questions/119123/why-isnt-sizeof-for-a-struct-equal-to-the-sum-of-sizeof-of-each-member
\ No newline at end of file
diff --git a/chapel.html.markdown b/chapel.html.markdown
index 866e92d2..9c1daf40 100644
--- a/chapel.html.markdown
+++ b/chapel.html.markdown
@@ -1066,7 +1066,7 @@ The more information you give the Chapel development team about issues you encou
 Feel free to email the team and other developers through the [sourceforge email lists](https://sourceforge.net/p/chapel/mailman).
 
 If you're really interested in the development of the compiler or contributing to the project,
-[check out the master Github repository](https://github.com/chapel-lang/chapel).
+[check out the master GitHub repository](https://github.com/chapel-lang/chapel).
 It is under the [Apache 2.0 License](http://www.apache.org/licenses/LICENSE-2.0).
 
 Installing the Compiler
diff --git a/cs-cz/brainfuck.html.markdown b/cs-cz/brainfuck.html.markdown
new file mode 100644
index 00000000..29abc21f
--- /dev/null
+++ b/cs-cz/brainfuck.html.markdown
@@ -0,0 +1,87 @@
+---
+language: brainfuck
+contributors:
+    - ["Prajit Ramachandran", "http://prajitr.github.io/"]
+    - ["Mathias Bynens", "http://mathiasbynens.be/"]
+translators:
+    - ["Vojta Svoboda", "https://github.com/vojtasvoboda/"]
+filename: learnbrainfuck-cz.bf
+lang: cs-cz
+---
+
+Brainfuck (psaný bez kapitálek s vyjímkou začátku věty) je extrémně minimální 
+Turingovsky kompletní (ekvivalentní) programovací jazyk a má pouze 8 příkazů.
+
+Můžete si ho vyzkoušet přímo v prohlížeči s [brainfuck-visualizer](http://fatiherikli.github.io/brainfuck-visualizer/).
+
+```
+Jakýkoliv znak mimo "><+-.,[]" (bez uvozovek) je ignorován.
+
+Brainfuck je reprezentován jako pole, které má 30.000 buněk s počátkem v nule 
+a datovým ukazatelem na aktuální buňce.
+
+Můžeme využít těchto osm příkazů:
++ : Přičte k aktuální buňce jedničku.
+- : Odečte od aktuální buňky jedničku.
+> : Posune datový ukazatel na další buňku, která je napravo.
+< : Posune datový ukazatel na předchozí buňku, která je nalevo.
+. : Vytiskne ASCII hodnotu aktuální buňky (například 65 = 'A').
+, : Načte jeden znak do aktuální buňky.
+[ : Pokud je hodnota aktuální buňky nulová, přeskočí na buňku odpovídající ] .
+    Jinak skočí na další instrukci.
+] : Pokud je hodnota aktuální buňky nulova, přeskočí na další instrukci.
+    Jinak skočí zpět na instrukci odpovídající [ .
+
+[ a ] tak tvoří 'while' smyčku a tyto symboly musí tak být v páru.
+
+Pojďme se mrknout na některé brainfuck programy.
+
+++++++ [ > ++++++++++ < - ] > +++++ .
+
+Tento program vypíše písmeno 'A' (v ASCII je to číslo 65). Nejdříve navýší 
+buňku #1 na hodnotu 6. Buňka #1 bude použita pro smyčku. Potom program vstoupí 
+do smyčky ([) a sníží hodnotu buňky #1 o jedničku. Ve smyčce zvýší hodnotu 
+buňky #2 desetkrát, vrátí ze zpět na buňku #1 a sníží její hodnotu o jedničku.
+Toto se stane šestkrát (je potřeba šestkrát snížit hodnotu buňky #1, aby byla 
+nulová a program přeskočil na konec cyklu označený znakem ].
+
+Na konci smyčky, kdy jsme na buňce #1 (která má hodnotu 0), tak má buňka #2 
+hodnotu 60. Přesuneme se na buňku #2 a pětkrát zvýšíme její hodnotu o jedničku 
+na hodnotu 65. Na konci vypíšeme hodnotu buňky #2 - 65, což je v ASCII znak 'A' 
+na terminálu.
+
+
+, [ > + < - ] > .
+
+Tento program přečte znak z uživatelského vstupu a zkopíruje ho do buňky #1.
+Poté začne smyčka - přesun na buňku #2, zvýšení hodnoty buňky #2 o jedničku,
+přesun zpět na buňku #1 a snížení její hodnoty o jedničku. Takto smyčka pokračuje
+do té doby, než je buňka #1 nulová a buňka #2 nabyde původní hodnotu buňky #1. 
+Protože jsme na buňce #1, přesuneme se na buňku #2 a vytiskneme její hodnotu 
+v ASCII.
+
+Je dobré vědět, že mezery jsou v programu uvedené pouze z důvodu čitelnosti. 
+Program je možné klidně zapsat i takto:
+
+,[>+<-]>.
+
+
+Nyní se podívejte na tento program a zkuste zjistit co dělá: 
+
+,>,< [ > [ >+ >+ << -] >> [- << + >>] <<< -] >>
+
+Tento program vezme dvě čísla ze vstupu a vynásobí je.
+
+Program nejdříve načte dvě vstupní hodnoty. Poté začíná smyčka řízená hodnotou
+v buňce #1 - přesun na buňku #2 a start druhé vnořené smyčky, která je řízená 
+hodnotou v buňce #2 a zvyšuje hodnotu v buňce #3. Nicméně je zde problém 
+kdy na konci vnitřní smyčky je v buňce #2 nula a smyčka by tak znovu 
+napokračovala. Vyřešíme to tak, že zvyšujeme o jedničku i buňku #4 a její 
+hodnotu poté překopírujeme do buňky #2. Na konci programu je v buňce #3 
+výsledek.
+```
+
+A to je brainbuck. Zase tak složitý není, co? Zkuste si nyní napsat nějaký
+vlastní brainfuck program a nebo interpretr v jiném jazyce, což není zase
+tak složité, ale pokud jste opravdový masochista, zkuste si naprogramovat
+interpretr jazyka brainfuck v jazyce... brainfuck :)
diff --git a/cs-cz/json.html.markdown b/cs-cz/json.html.markdown
new file mode 100644
index 00000000..5972da5e
--- /dev/null
+++ b/cs-cz/json.html.markdown
@@ -0,0 +1,62 @@
+---
+language: json
+contributors:
+  - ["Anna Harren", "https://github.com/iirelu"]
+  - ["Marco Scannadinari", "https://github.com/marcoms"]
+translators:
+    - ["Vojta Svoboda", "https://github.com/vojtasvoboda/"]
+filename: learnjson-cz.json
+lang: cs-cz
+---
+
+JSON je exterémně jednoduchý datově nezávislý formát a bude asi jeden z 
+nejjednodušších 'Learn X in Y Minutes' ze všech.
+
+JSON nemá ve své nejzákladnější podobě žádné komentáře, ale většina parserů 
+umí pracovat s komentáři ve stylu jazyka C (`//`, `/* */`). Pro tyto účely 
+však budeme používat 100% validní JSON bez komentářů. Pojďme se podívat na 
+syntaxi formátu JSON:
+
+```json
+{
+  "klic": "value",
+  
+  "hodnoty": "Musí být vždy uvozený v dvojitých uvozovkách",
+  "cisla": 0,
+  "retezce": "Hellø, wørld. Všechny unicode znaky jsou povolené, společně s \"escapováním\".",
+  "pravdivostni_hodnota": true,
+  "prazdna_hodnota": null,
+
+  "velke_cislo": 1.2e+100,
+
+  "objekt": {
+    "komentar": "Most of your structure will come from objects.",
+
+    "pole": [0, 1, 2, 3, "Pole nemusí být pouze homogenní.", 5],
+
+    "jiny_objekt": {
+      "comment": "Je povolené jakkoli hluboké zanoření."
+    }
+  },
+
+  "cokoli": [
+    {
+      "zdroje_drasliku": ["banány"]
+    },
+    [
+      [1, 0, 0, 0],
+      [0, 1, 0, 0],
+      [0, 0, 1, "neo"],
+      [0, 0, 0, 1]
+    ]
+  ],
+  
+  "alternativni_styl_zapisu": {
+    "komentar": "Mrkni se na toto!"
+  , "pozice_carky": "Na pozici čárky nezáleží - pokud je před hodnotou, ať už je kdekoli, tak je validní."
+  , "dalsi_komentar": "To je skvělé."
+  },
+
+  "to_bylo_rychle": "A tím jsme hotový. Nyní již víte vše, co může formát JSON nabídnout!"
+}
+```
diff --git a/cs-cz/markdown.html.markdown b/cs-cz/markdown.html.markdown
index 0d44bc12..568e4343 100644
--- a/cs-cz/markdown.html.markdown
+++ b/cs-cz/markdown.html.markdown
@@ -53,7 +53,7 @@ __Stejně jako tento.__
 **_Jako tento!_**
 *__A tento!__*
 
-<!-- Ve verzi Markdownu od Githubu, máme k dispozici taky prošktrnutí: -->
+<!-- Ve verzi Markdownu od GitHubu, máme k dispozici taky prošktrnutí: -->
 
 ~~Tento text je prošktrnutý.~~
 
@@ -152,7 +152,7 @@ Tento box bude zašktrnutý
 
 Jan nevědel, jak se dělá `go_to()` funkce!
 
-<!-- V Markdownu od Githubu , můžete použít speciální syntaxi pro kód -->
+<!-- V Markdownu od GitHubu , můžete použít speciální syntaxi pro kód -->
 
 \`\`\`ruby <!-- vyjma zpětných lomítek, jenom ```ruby ! -->
 def neco
@@ -160,7 +160,7 @@ def neco
 end
 \`\`\` <!-- zde taky, žádné zpětná lomítka, pouze ``` -->
 
-<!-- Text výše nepotřebuje odsazení a navíc Github použije zvýraznění označeného
+<!-- Text výše nepotřebuje odsazení a navíc GitHub použije zvýraznění označeného
  jazyka. -->
 
 <!-- Horizontální čára (<hr />) -->
@@ -232,13 +232,13 @@ Dejte text, který chcete zobrazit, do [] následovaný url v závorkách () a j
 Chci napsat *tento text obklopený hvězdičkami*, ale nechci aby to bylo kurzívou, tak udělám: \*tento text obklopený hvězdičkami\*.
 
 <!-- Klávesové zkratky -->
-<!-- V Markdownu od Githubu, můžete použít tag <kbd> k reprezentování klaves na počítači -->
+<!-- V Markdownu od GitHubu, můžete použít tag <kbd> k reprezentování klaves na počítači -->
 
 Váš počítač přestal pracovat? Zkuste
 <kbd>Ctrl</kbd>+<kbd>Alt</kbd>+<kbd>Del</kbd>
 
 <!-- Tabulky -->
-<!-- Tabulky jsou povolené pouze v Markdownu od Githubu a jsou trochu podivně,
+<!-- Tabulky jsou povolené pouze v Markdownu od GitHubu a jsou trochu podivně,
      ale když je opravdu chcete: -->
 
 | Sloupec1     | Sloupec2 | Sloupec3      |
diff --git a/csharp.html.markdown b/csharp.html.markdown
index 7d7f4340..197f43e7 100644
--- a/csharp.html.markdown
+++ b/csharp.html.markdown
@@ -24,10 +24,12 @@ Multi-line comments look like this
 /// This is an XML documentation comment which can be used to generate external
 /// documentation or provide context help within an IDE
 /// </summary>
-//public void MethodOrClassOrOtherWithParsableHelp() {}
+/// <param name="firstParam">This is some parameter documentation for firstParam</param>
+/// <returns>Information on the returned value of a function</returns>
+//public void MethodOrClassOrOtherWithParsableHelp(string firstParam) {}
 
 // Specify the namespaces this source code will be using
-// The namespaces below are all part of the standard .NET Framework Class Libary
+// The namespaces below are all part of the standard .NET Framework Class Library
 using System;
 using System.Collections.Generic;
 using System.Dynamic;
@@ -421,7 +423,7 @@ on a new line! ""Wow!"", the masses cried";
                 // Item is an int
                 Console.WriteLine(item.ToString());
         }
-        
+
         // YIELD
         // Usage of the "yield" keyword indicates that the method it appears in is an Iterator
         // (this means you can use it in a foreach loop)
@@ -437,7 +439,7 @@ on a new line! ""Wow!"", the masses cried";
             foreach (var counter in YieldCounter())
                 Console.WriteLine(counter);
         }
-        
+
         // you can use more than one "yield return" in a method
         public static IEnumerable<int> ManyYieldCounter()
         {
@@ -446,7 +448,7 @@ on a new line! ""Wow!"", the masses cried";
             yield return 2;
             yield return 3;
         }
-        
+
         // you can also use "yield break" to stop the Iterator
         // this method would only return half of the values from 0 to limit.
         public static IEnumerable<int> YieldCounterWithBreak(int limit = 10)
@@ -482,7 +484,7 @@ on a new line! ""Wow!"", the masses cried";
             // ?? is syntactic sugar for specifying default value (coalesce)
             // in case variable is null
             int notNullable = nullable ?? 0; // 0
-            
+
             // ?. is an operator for null-propagation - a shorthand way of checking for null
             nullable?.Print(); // Use the Print() extension method if nullable isn't null
 
@@ -913,17 +915,17 @@ on a new line! ""Wow!"", the masses cried";
 
         public DbSet<Bicycle> Bikes { get; set; }
     }
-    
+
     // Classes can be split across multiple .cs files
     // A1.cs
-    public partial class A 
+    public partial class A
     {
         public static void A1()
         {
             Console.WriteLine("Method A1 in class A");
         }
     }
-    
+
     // A2.cs
     public partial class A
     {
@@ -932,9 +934,9 @@ on a new line! ""Wow!"", the masses cried";
             Console.WriteLine("Method A2 in class A");
         }
     }
-    
+
     // Program using the partial class "A"
-    public class Program 
+    public class Program
     {
         static void Main()
         {
diff --git a/css.html.markdown b/css.html.markdown
index 8ee4f4b9..4ec95f8b 100644
--- a/css.html.markdown
+++ b/css.html.markdown
@@ -7,6 +7,7 @@ contributors:
     - ["Connor Shea", "https://github.com/connorshea"]
     - ["Deepanshu Utkarsh", "https://github.com/duci9y"]
     - ["Tyler Mumford", "https://tylermumford.com"]
+    
 filename: learncss.css
 ---
 
@@ -195,7 +196,7 @@ Save a CSS stylesheet with the extension `.css`.
 
 ## Precedence or Cascade
 
-An element may be targeted by multiple selectors and may have a property set on it in more than once. In these cases, one of the rules takes precedence over others. Rules with a more specific selector take precedence over a less specific one, and a rule occuring later in the stylesheet overwrites a previous one.
+An element may be targeted by multiple selectors and may have a property set on it in more than once. In these cases, one of the rules takes precedence over others. Rules with a more specific selector take precedence over a less specific one, and a rule occuring later in the stylesheet overwrites a previous one (which also means that if two different linked stylesheets contain rules for an element and if the rules are of the same specificity, then order of linking would take precedence and the sheet linked latest would govern styling) .
 
 This process is called cascading, hence the name Cascading Style Sheets.
 
diff --git a/de-de/bash-de.html.markdown b/de-de/bash-de.html.markdown
index 541d28bb..654fcdd4 100644
--- a/de-de/bash-de.html.markdown
+++ b/de-de/bash-de.html.markdown
@@ -92,12 +92,12 @@ echo "immer ausgeführt" || echo "Nur ausgeführt wenn der erste Befehl fehlschl
 echo "immer ausgeführt" && echo "Nur ausgeführt wenn der erste Befehl Erfolg hat"
 
 # Um && und || mit if statements zu verwenden, braucht man mehrfache Paare eckiger Klammern:
-if [ $NAME == "Steve" ] && [ $Alter -eq 15 ]
+if [ "$NAME" == "Steve" ] && [ "$Alter" -eq 15 ]
 then
     echo "Wird ausgeführt wenn $NAME gleich 'Steve' UND $Alter gleich 15."
 fi
 
-if [ $Name == "Daniya" ] || [ $Name == "Zach" ]
+if [ "$Name" == "Daniya" ] || [ "$Name" == "Zach" ]
 then
     echo "Wird ausgeführt wenn $NAME gleich 'Daniya' ODER $NAME gleich 'Zach'."
 fi
diff --git a/de-de/git-de.html.markdown b/de-de/git-de.html.markdown
index dea329d5..61f7bb67 100644
--- a/de-de/git-de.html.markdown
+++ b/de-de/git-de.html.markdown
@@ -33,6 +33,7 @@ Eine Versionsverwaltung erfasst die Änderungen einer Datei oder eines Verzeichn
 * Ist offline einsetzbar.
 * Einfache Kollaboration!
 * Branching ist einfach!
+* Branching ist schnell!
 * Merging ist einfach!
 * Git ist schnell.
 * Git ist flexibel.
@@ -53,11 +54,11 @@ Das .git-Verzeichnis enthält alle Einstellung, Logs, Branches, den HEAD und meh
 
 ### Arbeitsverzeichnis (Teil des Repositorys)
 
-Dies sind die Verzeichnisse und Dateien in deinem Repository.
+Dies sind die Verzeichnisse und Dateien in deinem Repository, also z.B. dein Programmcode.
 
 ### Index (Teil des .git-Verzeichnisses)
 
-Der Index ist die die Staging-Area von Git. Es ist im Grunde eine Ebene, die Arbeitsverzeichnis vom Repository trennt. Sie gibt Entwicklern mehr Einfluss darüber, was ins Git-Repository eingeht.
+Der Index ist die Staging-Area von Git. Es ist im Grunde eine Ebene, die Arbeitsverzeichnis vom Repository trennt. Sie gibt Entwicklern mehr Einfluss darüber, was ins Git-Repository eingeht.
 
 ### Commit
 
@@ -84,7 +85,7 @@ Ein *head* ist ein Pointer, der auf einen beliebigen Commit zeigt.  Ein Reposito
 
 ### init
 
-Erstelle ein leeres Git-Repository. Die Einstellungen, gespeicherte Informationen und mehr zu diesem Git-Repository werden in einem Verzeichnis namens *.git* angelegt.
+Erstelle ein leeres Git-Repository im aktuellen Verzeichnis. Die Einstellungen, gespeicherte Informationen und mehr zu diesem Git-Repository werden in einem Verzeichnis namens *.git* angelegt.
 
 ```bash
 $ git init
@@ -180,6 +181,8 @@ Bringt alle Dateien im Arbeitsverzeichnis auf den Stand des Index oder des angeg
 ```bash
 # Ein Repo auschecken - wenn nicht anders angegeben ist das der master
 $ git checkout
+# Eine Datei auschecken - sie befindet sich dann auf dem aktuellen Stand im Repository
+$ git checkout /path/to/file
 # Einen bestimmten Branch auschecken
 $ git checkout branchName
 # Erstelle einen neuen Branch und wechsle zu ihm. Wie: "git branch <name>; git checkout <name>"
@@ -217,6 +220,9 @@ $ git diff --cached
 
 # Unterschiede zwischen deinem Arbeitsverzeichnis und dem aktuellsten Commit anzeigen
 $ git diff HEAD
+
+# Unterschiede zwischen dem Index und dem aktuellsten Commit (betrifft nur Dateien im Index)
+$ git diff --staged
 ```
 
 ### grep
@@ -374,3 +380,5 @@ $ git rm /pather/to/the/file/HelloWorld.c
 * [SalesForce Cheat Sheet](https://na1.salesforce.com/help/doc/en/salesforce_git_developer_cheatsheet.pdf)
 
 * [GitGuys](http://www.gitguys.com/)
+
+* [gitflow - Ein Modell um mit Branches zu arbeiten](http://nvie.com/posts/a-successful-git-branching-model/)
diff --git a/de-de/go-de.html.markdown b/de-de/go-de.html.markdown
index 94f48e65..dca88f01 100644
--- a/de-de/go-de.html.markdown
+++ b/de-de/go-de.html.markdown
@@ -4,6 +4,7 @@ filename: learngo-de.go
 contributors:
     - ["Joseph Adams", "https://github.com/jcla1"]
     - ["Dennis Keller", "https://github.com/denniskeller"]
+translators:
     - ["Jerome Meinke", "https://github.com/jmeinke"]
 lang: de-de
 ---
diff --git a/de-de/hack-de.html.markdown b/de-de/hack-de.html.markdown
new file mode 100644
index 00000000..42428130
--- /dev/null
+++ b/de-de/hack-de.html.markdown
@@ -0,0 +1,322 @@
+---
+language: Hack
+lang: de-de
+contributors:
+    - ["Stephen Holdaway", "https://github.com/stecman"]
+    - ["David Lima", "https://github.com/davelima"]
+translators:
+    - ["Jerome Meinke", "https://github.com/jmeinke"]
+filename: learnhack-de.hh
+---
+
+Hack ist eine von Facebook neu entwickelte Programmiersprache auf Basis von PHP.
+Sie wird von der HipHop Virtual Machine (HHVM) ausgeführt. Die HHVM kann
+aufgrund der Ähnlichkeit der Programmiersprachen nicht nur Hack, sondern auch
+PHP-Code ausführen. Der wesentliche Unterschied zu PHP besteht in der statischen
+Typisierung der Sprache, die eine wesentlich höhere Performance erlaubt.
+
+
+Hier werden nur Hack-spezifische Eigenschaften beschrieben. Details über PHP's
+Syntax findet man im [PHP Artikel](http://learnxinyminutes.com/docs/php/) dieser
+Seite.
+
+```php
+<?hh
+
+// Hack-Syntax ist nur für Dateien aktiv, die mit dem <?hh Prefix starten.
+// Der <?hh Prefix kann nicht wie <?php mit HTML gemischt werden.
+// Benutzung von "<?hh //strict" aktiviert den Strikt-Modus des Type-Checkers.
+
+
+// Typisierung für Funktions-Argumente
+function repeat(string $word, int $count)
+{
+    $word = trim($word);
+    return str_repeat($word . ' ', $count);
+}
+
+// Typisierung für Rückgabewerte
+function add(...$numbers) : int
+{
+    return array_sum($numbers);
+}
+
+// Funktionen ohne Rückgabewert, werden mit "void" typisiert
+function truncate(resource $handle) : void
+{
+    // ...
+}
+
+// Typisierung unterstützt die explizit optionale Ein- / Ausgabe von "null"
+function identity(?string $stringOrNull) : ?string
+{
+    return $stringOrNull;
+}
+
+// Typisierung von Klassen-Eigenschaften
+class TypeHintedProperties
+{
+    public ?string $name;
+
+    protected int $id;
+
+    private float $score = 100.0;
+
+    // Hack erfordert es, dass typisierte Eigenschaften (also "non-null")
+    // einen Default-Wert haben oder im Konstruktor initialisiert werden.
+    public function __construct(int $id)
+    {
+        $this->id = $id;
+    }
+}
+
+
+// Kurzgefasste anonyme Funktionen (lambdas)
+$multiplier = 5;
+array_map($y ==> $y * $multiplier, [1, 2, 3]);
+
+
+// Weitere, spezielle Felder (Generics)
+// Diese kann man sich als ein zugreifbares Interface vorstellen
+class Box<T>
+{
+    protected T $data;
+
+    public function __construct(T $data) {
+        $this->data = $data;
+    }
+
+    public function getData(): T {
+        return $this->data;
+    }
+}
+
+function openBox(Box<int> $box) : int
+{
+    return $box->getData();
+}
+
+
+// Formen
+//
+// Hack fügt das Konzept von Formen hinzu, wie struct-ähnliche arrays
+// mit einer typ-geprüften Menge von Schlüsseln
+type Point2D = shape('x' => int, 'y' => int);
+
+function distance(Point2D $a, Point2D $b) : float
+{
+    return sqrt(pow($b['x'] - $a['x'], 2) + pow($b['y'] - $a['y'], 2));
+}
+
+distance(
+    shape('x' => -1, 'y' => 5),
+    shape('x' => 2, 'y' => 50)
+);
+
+
+// Typen-Definition bzw. Aliasing
+//
+// Hack erlaubt es Typen zu definieren und sorgt somit für bessere Lesbarkeit
+newtype VectorArray = array<int, Vector<int>>;
+
+// Ein Tupel mit zwei Integern
+newtype Point = (int, int);
+
+function addPoints(Point $p1, Point $p2) : Point
+{
+    return tuple($p1[0] + $p2[0], $p1[1] + $p2[1]);
+}
+
+addPoints(
+    tuple(1, 2),
+    tuple(5, 6)
+);
+
+
+// Erstklassige Aufzählungen (enums)
+enum RoadType : int
+{
+    Road = 0;
+    Street = 1;
+    Avenue = 2;
+    Boulevard = 3;
+}
+
+function getRoadType() : RoadType
+{
+    return RoadType::Avenue;
+}
+
+
+// Automatische Erstellung von Klassen-Eigenschaften durch Konstruktor-Argumente
+//
+// Wiederkehrende Definitionen von Klassen-Eigenschaften können durch die Hack-
+// Syntax vermieden werden. Hack erlaubt es die Klassen-Eigenschaften über
+// Argumente des Konstruktors zu definieren.
+class ArgumentPromotion
+{
+    public function __construct(public string $name,
+                                protected int $age,
+                                private bool $isAwesome) {}
+}
+
+class WithoutArgumentPromotion
+{
+    public string $name;
+
+    protected int $age;
+
+    private bool $isAwesome;
+
+    public function __construct(string $name, int $age, bool $isAwesome)
+    {
+        $this->name = $name;
+        $this->age = $age;
+        $this->isAwesome = $isAwesome;
+    }
+}
+
+
+// Kooperatives Multitasking
+//
+// Die Schlüsselworte "async" and "await" führen Multitasking ein.
+// Achtung, hier werden keine Threads benutzt, sondern nur Aktivität getauscht.
+async function cooperativePrint(int $start, int $end) : Awaitable<void>
+{
+    for ($i = $start; $i <= $end; $i++) {
+        echo "$i ";
+
+        // Geben anderen Tasks die Möglichkeit aktiv zu werden
+        await RescheduleWaitHandle::create(RescheduleWaitHandle::QUEUE_DEFAULT, 0);
+    }
+}
+
+// Die Ausgabe von folgendem Code ist "1 4 7 2 5 8 3 6 9"
+AwaitAllWaitHandle::fromArray([
+    cooperativePrint(1, 3),
+    cooperativePrint(4, 6),
+    cooperativePrint(7, 9)
+])->getWaitHandle()->join();
+
+
+// Attribute
+//
+// Attribute repräsentieren eine Form von Metadaten für Funktionen.
+// Hack bietet Spezial-Attribute, die nützliche Eigenschaften mit sich bringen.
+
+// Das __Memoize Attribut erlaubt es die Ausgabe einer Funktion zu cachen.
+<<__Memoize>>
+function doExpensiveTask() : ?string
+{
+    return file_get_contents('http://example.com');
+}
+
+// Der Funktionsrumpf wird im Folgenden nur ein einziges mal ausgeführt:
+doExpensiveTask();
+doExpensiveTask();
+
+
+// Das __ConsistentConstruct Attribut signalisiert dem type-checker, dass
+// die Funktionsdeklaration von __construct für alle Unterklassen dieselbe ist.
+<<__ConsistentConstruct>>
+class ConsistentFoo
+{
+    public function __construct(int $x, float $y)
+    {
+        // ...
+    }
+
+    public function someMethod()
+    {
+        // ...
+    }
+}
+
+class ConsistentBar extends ConsistentFoo
+{
+    public function __construct(int $x, float $y)
+    {
+        // Der Type-checker erzwingt den Aufruf des Eltern-Klassen-Konstruktors
+        parent::__construct($x, $y);
+
+        // ...
+    }
+
+    // Das __Override Attribut ist ein optionales Signal an den Type-Checker,
+    // das erzwingt, dass die annotierte Methode die Methode der Eltern-Klasse
+    // oder des Traits verändert.
+    <<__Override>>
+    public function someMethod()
+    {
+        // ...
+    }
+}
+
+class InvalidFooSubclass extends ConsistentFoo
+{
+    // Wenn der Konstruktor der Eltern-Klasse nicht übernommen wird,
+    // wird der Type-Checker einen Fehler ausgeben:
+    //
+    //  "This object is of type ConsistentBaz. It is incompatible with this object
+    //   of type ConsistentFoo because some of their methods are incompatible"
+    //
+    public function __construct(float $x)
+    {
+        // ...
+    }
+
+    // Auch bei der Benutzung des __Override Attributs für eine nicht veränderte
+    // Methode wird vom Type-Checker eine Fehler ausgegeben:
+    //
+    //  "InvalidFooSubclass::otherMethod() is marked as override; no non-private
+    //   parent definition found or overridden parent is defined in non-<?hh code"
+    //
+    <<__Override>>
+    public function otherMethod()
+    {
+        // ...
+    }
+}
+
+// Ein Trait ist ein Begriff aus der objektorientierten Programmierung und
+// beschreibt eine wiederverwendbare Sammlung von Methoden und Attributen,
+// ähnlich einer Klasse.
+
+// Anders als in PHP können Traits auch als Schnittstellen (Interfaces)
+// implementiert werden und selbst Schnittstellen implementieren.
+interface KittenInterface
+{
+    public function play() : void;
+}
+
+trait CatTrait implements KittenInterface
+{
+    public function play() : void
+    {
+        // ...
+    }
+}
+
+class Samuel
+{
+    use CatTrait;
+}
+
+
+$cat = new Samuel();
+$cat instanceof KittenInterface === true; // True
+
+```
+
+## Weitere Informationen
+
+Die Hack [Programmiersprachen-Referenz](http://docs.hhvm.com/manual/de/hacklangref.php)
+erklärt die neuen Eigenschaften der Sprache detailliert auf Englisch. Für
+allgemeine Informationen kann man auch die offizielle Webseite [hacklang.org](http://hacklang.org/)
+besuchen.
+
+Die offizielle Webseite [hhvm.com](http://hhvm.com/) bietet Infos zum Download
+und zur Installation der HHVM.
+
+Hack's [nicht-untersützte PHP Syntax-Elemente](http://docs.hhvm.com/manual/en/hack.unsupported.php)
+werden im offiziellen Handbuch beschrieben.
diff --git a/de-de/haml-de.html.markdown b/de-de/haml-de.html.markdown
new file mode 100644
index 00000000..7272b365
--- /dev/null
+++ b/de-de/haml-de.html.markdown
@@ -0,0 +1,156 @@
+---
+language: haml
+filename: learnhaml-de.haml
+contributors:
+  - ["Simon Neveu", "https://github.com/sneveu"]
+  - ["Sol Bekic", "https://github.com/S0lll0s"]
+lang: de-de
+---
+
+Haml ist eine Markup- und Templatingsprache, aufgesetzt auf Ruby, mit der HTML Dokumente einfach beschrieben werden können.
+
+Haml vermindert Wiederholung und Fehleranfälligkeit, indem es Tags basierend auf der Markup-Struktur schließt und schachtelt.
+Dadurch ergibt sich kurzes, präzises und logisches Markup.
+
+Haml kann außerhalb eines Ruby-projekts verwendet werden. Mit dem installierten Haml gem kann man das Terminal benutzen um Haml zu HTML umzuwandeln:
+
+$ haml input_file.haml output_file.html
+
+
+```haml
+/ -------------------------------------------
+/ Einrückung
+/ -------------------------------------------
+
+/
+  Einrückung ist ein wichtiges Element des Haml Syntax, deswegen ist es
+  wichtig ein konsequentes Schema zu verwenden. Meistens werden zwei spaces
+  verwendet, solange die Einrückungen das gleiche Schema verfolgen können
+  aber auch andere Breiten und Tabs verwendet werden
+
+
+/ -------------------------------------------
+/ Kommentare
+/ -------------------------------------------
+
+/ Kommentare beginnen mit einem Slash
+
+/
+  Mehrzeilige Kommentare werden eingerückt und mit einem Slash
+  eingeführt
+
+-# Diese Zeile ist ein "stummes" Kommentar, es wird nicht mitgerendert
+
+
+/ -------------------------------------------
+/ HTML Elemente
+/ -------------------------------------------
+
+/ Tags werden durch ein Prozentzeichen und den Tagnamen erzeugt
+%body
+  %header
+    %nav
+
+/ Die Zeilen oben würden folgendes ergeben:
+  <body>
+    <header>
+      <nav></nav>
+    </header>
+  </body>
+
+/ Text kann direkt nach dem Tagnamen eingefügt werden:
+%h1 Headline copy
+
+/ Mehrzeilige Inhalte müssen stattdessen eingerückt werden:
+%p 
+  This is a lot of content that we could probably split onto two
+  separate lines.
+
+/ 
+  HTML kann mit &= escaped werden. So werden HTML-sensitive Zeichen
+  enkodiert. Zum Beispiel:
+
+%p
+  &= "Ja & Nein"
+
+/ würde 'Ja &amp; Nein' ergeben
+
+/ HTML kann mit != dekodiert werden:
+%p
+  != "so schreibt man ein Paragraph-Tag: <p></p>"
+
+/ ...was 'This is how you write a paragraph tag <p></p>' ergeben würde
+
+/ CSS Klassen können mit '.classname' an Tags angehängt werden:
+%div.foo.bar
+
+/ oder über einen Ruby Hash:
+%div{:class => 'foo bar'}
+
+/ Das div Tag wird standardmäßig verwendet, divs können also verkürzt werden:
+.foo
+
+/ andere Attribute können über den Hash angegeben werden:
+%a{:href => '#', :class => 'bar', :title => 'Bar'}
+
+/ Booleesche Attribute können mit 'true' gesetzt werden:
+%input{:selected => true}
+
+/ data-Attribute können in einem eigenen Hash im :data key angegeben werden:
+%div{:data => {:attribute => 'foo'}}
+
+
+/ -------------------------------------------
+/ Verwendung von Ruby
+/ -------------------------------------------
+
+/ Mit dem = Zeichen können Ruby-werte evaluiert und als Tag-text verwendet werden:
+
+%h1= book.name
+
+%p
+  = book.author
+  = book.publisher
+
+
+/ Code nach einem Bindestrich wird ausgeführt aber nicht gerendert:
+- books = ['book 1', 'book 2', 'book 3']
+
+/ So können zum Beispiel auch Blöcke verwendet werden:
+- books.shuffle.each_with_index do |book, index|
+  %h1= book
+
+  if book do
+    %p This is a book
+
+/
+  Auch hier werden wieder keine End-Tags benötigt!
+  Diese ergeben sich aus der Einrückung.
+
+
+/ -------------------------------------------
+/ Inline Ruby / Ruby Interpolation
+/ -------------------------------------------
+
+/ Ruby variablen können mit #{} in Text interpoliert werden:
+%p dein bestes Spiel ist #{best_game}
+
+
+/ -------------------------------------------
+/ Filter
+/ -------------------------------------------
+
+/
+  Mit dem Doppelpinkt können Haml Filter benutzt werden.
+  Zum Beispiel gibt es den :javascript Filter, mit dem inline JS
+  geschrieben werden kann:
+
+:javascript
+  console.log('Dies ist ein <script>');
+
+```
+
+## Weitere Resourcen
+
+- [What is HAML?](http://haml.info/) - Eine gute Einleitung auf der Haml homepage (englisch)
+- [Official Docs](http://haml.info/docs/yardoc/file.REFERENCE.html) - Die offizielle Haml Referenz (englisch)
diff --git a/de-de/haskell-de.html.markdown b/de-de/haskell-de.html.markdown
index d1a0008e..5d17ccc7 100644
--- a/de-de/haskell-de.html.markdown
+++ b/de-de/haskell-de.html.markdown
@@ -100,7 +100,7 @@ not False -- True
 [1..] !! 999 -- 1000
 
 -- Haskell evaluiert nun die ersten 1 - 1000 Elemente, aber der Rest der Liste
--- bleibt unangetastet. Haskell wird sie solange nicht weiterevalieren
+-- bleibt unangetastet. Haskell wird sie solange nicht weiterevaluieren
 -- bis es muss.
 
 -- Zwei Listen konkatenieren
@@ -115,7 +115,7 @@ tail [1..5] -- [2, 3, 4, 5]
 init [1..5] -- [1, 2, 3, 4]
 last [1..5] -- 5
 
--- list comprehensions | Listen erschaffen
+-- Listen erschaffen ("list comprehensions")
 [x*2 | x <- [1..5]] -- [2, 4, 6, 8, 10]
 
 -- Mit Bedingungen
@@ -179,7 +179,7 @@ myMap (\x -> x + 2) [1..5] -- [3, 4, 5, 6, 7]
 
 -- Fold (`inject` in einigen Sprachen)
 -- Foldl1 bedeutet: fold von links nach rechts und nehme den ersten
--- Wert der Liste als Basiswert f[r den Akkumulator.
+-- Wert der Liste als Basiswert für den Akkumulator.
 foldl1 (\acc x -> acc + x) [1..5] -- 15
 
 ----------------------------------------------------
@@ -201,7 +201,7 @@ foo 5 -- 15
 
 -- Funktionskomposition
 -- Die (.) Funktion verkettet Funktionen.
--- Zum Beispiel, die Funktion Foo nimmt ein Argument addiert 10 dazu und
+-- Zum Beispiel, die Funktion Foo nimmt ein Argument, addiert 10 dazu und
 -- multipliziert dieses Ergebnis mit 4.
 foo = (*4) . (+10)
 
@@ -212,7 +212,7 @@ foo 5 -- 60
 -- Haskell hat einen Operator `$`, welcher Funktionsapplikation durchführt.
 -- Im Gegenzug zu der Standard-Funktionsapplikation, welche linksassoziativ ist
 -- und die höchstmögliche Priorität von "10" hat, ist der `$`-Operator
--- rechtsassoziativ und hat die Priorität 0. Dieses hat (idr.) den Effekt,
+-- rechtsassoziativ und hat die Priorität 0. Dieses hat (i.d.R.) den Effekt,
 -- dass der `komplette` Ausdruck auf der rechten Seite als Parameter für die
 -- Funktion auf der linken Seite verwendet wird.
 -- Mit `.` und `$` kann man sich so viele Klammern ersparen.
@@ -283,7 +283,7 @@ for [0..5] $ \i -> show i
 for [0..5] show
 
 -- foldl oder foldr reduziren Listen auf einen Wert.
--- foldl <fn> <initial value> <list>
+-- foldl <Funktion> <initialer Wert> <Liste>
 foldl (\x y -> 2*x + y) 4 [1,2,3] -- 43
 
 -- die Abarbeitung sieht so aus:
@@ -435,7 +435,7 @@ qsort (p:xs) = qsort lesser ++ [p] ++ qsort greater
 ```
 
 Haskell ist sehr einfach zu installieren.
-Hohl es dir von [hier](http://www.haskell.org/platform/).
+Hol es dir von [hier](http://www.haskell.org/platform/).
 
 Eine sehr viele langsamere Einführung findest du unter:
 [Learn you a Haskell](http://learnyouahaskell.com/) oder
diff --git a/de-de/lua-de.html.markdown b/de-de/lua-de.html.markdown
new file mode 100644
index 00000000..83f8506c
--- /dev/null
+++ b/de-de/lua-de.html.markdown
@@ -0,0 +1,426 @@
+---
+language: Lua
+contributors:
+    - ["Tyler Neylon", "http://tylerneylon.com/"]
+translators:
+    - ["Martin Schimandl", "https://github.com/Git-Jiro"]
+filename: learnlua-de.lua
+lang: de-de
+---
+
+```lua
+-- Zwei Gedankenstriche starten ein einzeiliges Kommentar.
+
+--[[
+     Fügt man zwei '[' und ']' hinzu,
+     erzeugt man einen mehrzeiligen Kommentar.
+--]]
+--------------------------------------------------------------------------------
+-- 1. Variablen und Fluß-Kontrolle.
+--------------------------------------------------------------------------------
+
+num = 42  -- Alle Nummern sind vom Typ: Double.
+-- Werd nicht nervös, 64-Bit Double haben 52 Bits zum Speichern von exakten
+-- Ganzzahlen; Maschinen-Genauigkeit ist kein Problem für Ganzzahlen kleiner als 
+-- 52 Bit.
+
+s = 'walternate'  -- Zeichenketten sind unveränderlich, wie bei Python.
+t = "Doppelte Anführungszeichen sind auch OK"
+u = [[ Doppelte eckige Klammern
+       beginnen und beenden
+       mehrzeilige Zeichenketten.]]
+t = nil  -- Undefineren von t; Lua hat einen Garbage Collection.
+
+-- Blöcke werden durch Schlüsselwörter wie do/end markiert:
+while num < 50 do
+  num = num + 1  -- Es gibt Keine Operatoren wie ++ oder +=
+end
+
+-- If Bedingungen:
+if num > 40 then
+  print('over 40')
+elseif s ~= 'walternate' then  -- ~= bedeutet ungleich
+  -- Gleichheits-Check == wie bei Python; OK für Zeichenketten.
+  io.write('not over 40\n')  -- Standard ist stdout.
+else
+  -- Variablen sind standardmäßig global.
+  thisIsGlobal = 5  -- Camel case ist üblich.
+
+  -- So macht man eine Variable lokal:
+  local line = io.read()  -- Lies die nächste Zeile von stdin.
+
+  -- Zeichenketten zusammenführen mit dem .. Operator:
+  print('Winter is coming, ' .. line)
+end
+
+-- Undefinierte Variablen geben nil zurück.
+-- Das ist kein Fehler:
+foo = anUnknownVariable  -- Nun ist foo = nil.
+
+aBoolValue = false
+
+-- Nur nil und false sind unwahr; 0 and '' sind wahr!
+if not aBoolValue then print('was false') end
+
+-- 'or' und 'and' sind "kurz-geschlossen". Das ist so ähnlich wie der a?b:c
+-- operator in C/js:
+-- in C/js:
+ans = aBoolValue and 'yes' or 'no'  --> 'no'
+
+karlSum = 0
+for i = 1, 100 do  -- Ein Bereich inkludiert beide Enden.
+  karlSum = karlSum + i
+end
+
+-- Verwende "100, 1, -1" als Breich für Countdowns:
+fredSum = 0
+for j = 100, 1, -1 do fredSum = fredSum + j end
+
+-- Im Allgemeinen besteht ein Bereich aus: Anfang, Ende, [, Schrittweite].
+
+-- Ein anderes Schleifen-Konstrukt:
+repeat
+  print('Der Weg der Zukunft')
+  num = num - 1
+until num == 0
+
+--------------------------------------------------------------------------------
+-- 2. Funktionen.
+--------------------------------------------------------------------------------
+
+function fib(n)
+  if n < 2 then return n end
+  return fib(n - 2) + fib(n - 1)
+end
+
+-- Closures und anonyme Funktionen sind ok:
+function adder(x)
+  -- Die zurückgegebene Funktion wird erzeugt wenn addr aufgerufen wird und merkt
+  -- sich den Wert von x:
+  return function (y) return x + y end
+end
+a1 = adder(9)
+a2 = adder(36)
+print(a1(16))  --> 25
+print(a2(64))  --> 100
+
+-- Rückgabewerte, Funktions-Aufrufe und Zuweisungen funktionieren alle mit
+-- Listen die nicht immer gleich lang sein müssen. Überzählige Empfänger
+-- bekommen nil; überzählige Sender werden ignoriert.
+
+x, y, z = 1, 2, 3, 4
+-- Nun ist x = 1, y = 2, z = 3, und 4 wird ignoriert.
+
+function bar(a, b, c)
+  print(a, b, c)
+  return 4, 8, 15, 16, 23, 42
+end
+
+x, y = bar('zaphod')  --> prints "zaphod  nil nil"
+-- Nun ist x = 4, y = 8, die Werte 15..42 werden ignoriert.
+
+-- Funktionen sind erste Klasse, und können lokal oder global sein.
+-- Das ist alles das Gleiche:
+function f(x) return x * x end
+f = function (x) return x * x end
+
+-- Das auch:
+local function g(x) return math.sin(x) end
+local g = function(x) return math.sin(x) end
+-- Äquivalent zu local function g(x)..., außer das Referenzen auf g im
+-- Funktions-Körper nicht wie erwartet funktionieren.
+local g; g  = function (x) return math.sin(x) end
+-- Die Deklaration 'local g' macht Selbst-Referenzen auf g OK.
+
+-- Nebenbei gesagt, Trigonometrie-Funktionen verwenden Radianten.
+
+-- Funktionsaufrufe mit nur einem Zeichenketten-Parameter brauch keine runden
+-- Klammern.
+print 'hello'  -- Funktioniert wunderbar.
+
+-- Funktionsaufrufe mit einem Tabellen-Parameter brauchen auch keine runden
+-- Klammern. Mehr zu Tabellen kommt später.
+print {} -- Funktioniert auch wunderbar.
+
+--------------------------------------------------------------------------------
+-- 3. Tabellen.
+--------------------------------------------------------------------------------
+
+-- Tabellen sind die einzige zusammengesetzte Struktur in Lua. Sie sind
+-- assoziative Arrays. Sie sind so ähnlich wie PHP arrays oder JavaScript
+-- Objekte. Sie sind Hash-Lookup-Dictionaries die auch als Listen verwendet
+-- werden können.
+
+-- Verwenden von Tabellen als Dictionaries oder Maps:
+
+-- Dict-Literale haben standardmäßig Zeichenketten als Schlüssel:
+t = {key1 = 'value1', key2 = false}
+
+-- Zeichenketten-Schlüssel verwenden eine JavaScript ähnliche Punkt-Notation.
+print(t.key1)  -- Ausgabe 'value1'.
+t.newKey = {}  -- Neues Schlüssel/Wert-Paar hinzufügen.
+t.key2 = nil   -- key2 aus der Tabelle entfernen.
+
+-- Literale notation für jeden (nicht-nil) Wert als Schlüssel:
+u = {['@!#'] = 'qbert', [{}] = 1729, [6.28] = 'tau'}
+print(u[6.28])  -- Ausgabe "tau"
+
+-- Schlüssel-Vergleiche funktionieren per Wert für Nummern und Zeichenketten,
+-- aber über die Identität bei Tabellen.
+a = u['@!#']  -- Nun ist a = 'qbert'.
+b = u[{}]     -- Wir würden 1729 erwarten, aber es ist nil:
+-- b = nil weil der Lookup fehlschlägt. Er schlägt Fehl, weil der Schlüssel
+-- den wir verwendet haben nicht das gleiche Objekt ist das wir verwendet
+-- haben um den original Wert zu speichern. Zahlen und Zeichnkette sind daher
+-- die praktischeren Schlüssel.
+
+-- Eine Funktion mit nur einem Tabellen-Parameter benötigt keine Klammern.
+function h(x) print(x.key1) end
+h{key1 = 'Sonmi~451'}  -- Ausgabe 'Sonmi~451'.
+
+for key, val in pairs(u) do  -- Tabellen-Iteration.
+  print(key, val)
+end
+
+-- _G ist eine spezielle Tabelle die alles Globale enthält.
+print(_G['_G'] == _G)  -- Ausgabe 'true'.
+
+-- Verwenden von Tabellen als Listen/Arrays:
+
+-- Listen-Literale verwenden implizit Ganzzahlen als Schlüssel:
+v = {'value1', 'value2', 1.21, 'gigawatts'}
+for i = 1, #v do  -- #v ist die Größe von v für Listen.
+  print(v[i])  -- Indices beginnen mit 1 !! SO VERRÜCKT!
+end
+-- Eine 'Liste' ist kein echter Typ. v ist nur eine Tabelle mit fortlaufenden
+-- Ganzzahlen als Schlüssel, die behandelt wird wie eine Liste.
+
+--------------------------------------------------------------------------------
+-- 3.1 Metatabellen und Metamethoden
+--------------------------------------------------------------------------------
+
+-- Eine Tabelle kann eine Metatabelle haben. Diese verleiht ihr so etwas wie
+-- Tabellen-Operator-Überladungs-Verhalten. Später sehen wir wie
+-- Metatabellen js-prototypen artiges Verhalten unterstützen.
+
+f1 = {a = 1, b = 2}  -- Repräsentiert den Bruch a/b.
+f2 = {a = 2, b = 3}
+
+-- Dies würde Fehlschlagen:
+-- s = f1 + f2
+
+metafraction = {}
+function metafraction.__add(f1, f2)
+  local sum = {}
+  sum.b = f1.b * f2.b
+  sum.a = f1.a * f2.b + f2.a * f1.b
+  return sum
+end
+
+setmetatable(f1, metafraction)
+setmetatable(f2, metafraction)
+
+s = f1 + f2  -- Rufe __add(f1, f2) vom der Metatabelle von f1 auf.
+
+-- f1 und f2 haben keine Schlüssel für ihre Metatabellen, anders als bei js
+-- Prototypen. Daher muss mithilfe von getmetatable(f1) darauf zugegriffen
+-- werden. Eine Metatabelle ist wie eine normale Tabelle mit Schlüsseln die
+-- Lua bekannt sind, so wie __add.
+
+
+-- Die nächste Zeile schlägt fehl weil s keine Metatabelle hat:
+-- t = s + s
+-- Mihilfe von Klassen ähnlichen Mustern kann das gelöst werden.
+-- Siehe weiter unten.
+
+-- Ein __index einer Metatabelle überlädt Punkt-Lookups:
+defaultFavs = {animal = 'gru', food = 'donuts'}
+myFavs = {food = 'pizza'}
+setmetatable(myFavs, {__index = defaultFavs})
+eatenBy = myFavs.animal  -- Funktioniert dank Metatabelle!
+
+--------------------------------------------------------------------------------
+-- Direkte Tabellen-Lookups die fehlschlagen werden mithilfe von __index der
+-- Metatabelle wiederholt. Das geschieht rekursiv.
+
+-- __index kann auch eine Funktion mit der Form function(tbl, key) sein.
+-- Damit kann man Lookups weiter anpassen.
+
+-- Werte wie __index,add, .. werden Metamethoden genannt.
+-- HIer eine vollständige Liste aller Metamethoden.
+
+-- __add(a, b)                     für a + b
+-- __sub(a, b)                     für a - b
+-- __mul(a, b)                     für a * b
+-- __div(a, b)                     für a / b
+-- __mod(a, b)                     für a % b
+-- __pow(a, b)                     für a ^ b
+-- __unm(a)                        für -a
+-- __concat(a, b)                  für a .. b
+-- __len(a)                        für #a
+-- __eq(a, b)                      für a == b
+-- __lt(a, b)                      für a < b
+-- __le(a, b)                      für a <= b
+-- __index(a, b)  <fn or a table>  für a.b
+-- __newindex(a, b, c)             für a.b = c
+-- __call(a, ...)                  für a(...)
+
+--------------------------------------------------------------------------------
+-- 3.2 Klassen-Artige Tabellen und Vererbung.
+--------------------------------------------------------------------------------
+
+-- Klassen sind in Lua nicht eingebaut. Es gibt verschieden Wege sie mithilfe
+-- von Tabellen und Metatabellen zu erzeugen.
+
+-- Die Erklärund des Beispiels erfolgt unterhalb.
+
+Dog = {}                                   -- 1.
+
+function Dog:new()                         -- 2.
+  local newObj = {sound = 'woof'}          -- 3.
+  self.__index = self                      -- 4.
+  return setmetatable(newObj, self)        -- 5.
+end
+
+function Dog:makeSound()                   -- 6.
+  print('I say ' .. self.sound)
+end
+
+mrDog = Dog:new()                          -- 7.
+mrDog:makeSound()  -- 'I say woof'         -- 8.
+
+-- 1. Dog verhält sich wie eine Klasse; Ist aber eine Tabelle.
+-- 2. "function tablename:fn(...)" ist das gleiche wie
+--    "function tablename.fn(self, ...)", Der : fügt nur ein Argument namens
+--    self hinzu. Siehe 7 & 8 um zu sehen wie self seinen Wert bekommt.
+-- 3. newObj wird eine Instanz von Dog.
+-- 4. "self" ist die zu Instanzierende Klasse. Meistern ist self = Dog, aber
+--    dies kann durch Vererbung geändert werden. newObj bekommt die Funktionen
+--    von self wenn wir die Metatabelle von newObj und __index von self auf
+--    self setzen.
+-- 5. Zur Erinnerung: setmetatable gibt sein erstes Argument zurück.
+-- 6. Der Doppelpunkt funktioniert wie bei 2, aber dieses Mal erwarten wir das
+--    self eine Instanz ist und keine Klasse.
+-- 7. Das Selbe wie Dog.new(Dog), also self = Dog in new().
+-- 8. Das Selbe wie mrDog.makeSound(mrDog); self = mrDog.
+
+--------------------------------------------------------------------------------
+
+-- Vererbungs-Beispiel:
+
+LoudDog = Dog:new()                           -- 1.
+
+function LoudDog:makeSound()
+  local s = self.sound .. ' '                 -- 2.
+  print(s .. s .. s)
+end
+
+seymour = LoudDog:new()                       -- 3.
+seymour:makeSound()  -- 'woof woof woof'      -- 4.
+
+--------------------------------------------------------------------------------
+-- 1. LoudDog bekommt die Methoden und Variablen von Dog.
+-- 2. self hat einen 'sound' Schlüssel von new(), siehe 3.
+-- 3. Das Gleiche wie "LoudDog.new(LoudDog)", und umgewandelt zu "Dog.new(LoudDog)"
+--    denn LoudDog hat keinen 'new' Schlüssel, aber "__index = Dog" steht in der
+--    Metatabelle.
+--    Ergebnis: Die Metatabelle von seymour ist LoudDog und "LoudDog.__index = Dog".
+--    Daher ist seymour.key gleich seymour.key, LoudDog.key, Dog.key, je nachdem
+--    welche Tabelle als erstes einen passenden Schlüssel hat.
+-- 4. Der 'makeSound' Schlüssel wird in LoudDog gefunden: Das ist das Gleiche
+--    wie "LoudDog.makeSound(seymour)".
+
+-- Wenn nötig, sieht new() einer Sub-Klasse genau so aus wie new() der
+-- Basis-Klasse:
+function LoudDog:new()
+  local newObj = {}
+  -- set up newObj
+  self.__index = self
+  return setmetatable(newObj, self)
+end
+
+--------------------------------------------------------------------------------
+-- 4. Module.
+--------------------------------------------------------------------------------
+
+
+--[[ Dieser Abschnitt ist auskommentiert damit der Rest des Skripts lauffähig
+--   bleibt.
+```
+
+```lua
+-- Angenommen mod.lua sieht so aus:
+local M = {}
+
+local function sayMyName()
+  print('Hrunkner')
+end
+
+function M.sayHello()
+  print('Why hello there')
+  sayMyName()
+end
+
+return M
+
+-- Eine andere Datei könnte die Funktionen in mod.lua so verwenden:
+local mod = require('mod')  -- Führe mod.lua aus.
+
+-- require ist der Standard-Weg um Module zu inkludieren.
+-- require verhält sich wie: (Wenn nicht gecached wird; siehe später)
+local mod = (function ()
+  <Inhalt von mod.lua>
+end)()
+-- Es ist als ob mod.lua eine Funktion wäre, sodass lokale Variablen in
+-- mod.lua ausserhalb unsichtbar sind.
+
+-- Das funktioniert weil mod hier das Gleiche wie M in mod.lua ist:
+mod.sayHello()  -- Says hello to Hrunkner.
+
+-- Das ist Falsch: sayMyName existiert nur in mod.lua:
+mod.sayMyName()  -- Fehler
+
+-- Der Rückgabe-Wert von require wird zwischengespeichert. Sodass Module nur
+-- einmal abgearbeitet werden, auch wenn sie mit require öfters eingebunden
+-- werden.
+
+-- Nehmen wir an mod2.lua enthält "print('Hi!')".
+local a = require('mod2')  -- Ausgabe Hi!
+local b = require('mod2')  -- Keine Ausgabe; a=b.
+
+-- dofile ist wie require aber ohne Zwischenspeichern.
+dofile('mod2')  --> Hi!
+dofile('mod2')  --> Hi! (läuft nochmal, nicht wie require)
+
+-- loadfile ladet eine lua Datei aber die Datei wird noch nicht abgearbeitet.
+f = loadfile('mod2')  -- Sobald f() aufgerufen wird läuft mod2.lua.
+
+-- loadstring ist loadfile für Zeichenketten
+g = loadstring('print(343)')  -- Gibt eine Funktion zurück..
+g()  -- Ausgabe 343; Vorher kam keine Ausgabe.
+
+--]]
+
+```
+## Referenzen
+
+Ich war so begeistert Lua zu lernen, damit ich Spiele mit <a href="http://love2d.org/">Love 2D game engine</a> programmieren konnte.
+
+Ich habe angefangen mit <a href="http://nova-fusion.com/2012/08/27/lua-for-programmers-part-1/">BlackBulletIV's Lua for programmers</a>.
+Danach habe ich das offizielle Lua Buch gelesen: <a href="http://www.lua.org/pil/contents.html">Programming in Lua</a>
+
+Es kann auch hilfreich sein hier vorbeizuschauen: <a href="http://lua-users.org/files/wiki_insecure/users/thomasl/luarefv51.pdf">Lua short
+reference</a>
+
+Wichtige Themen die hier nicht angesprochen wurden; die Standard-Bibliotheken:
+
+* <a href="http://lua-users.org/wiki/StringLibraryTutorial">string library</a>
+* <a href="http://lua-users.org/wiki/TableLibraryTutorial">table library</a>
+* <a href="http://lua-users.org/wiki/MathLibraryTutorial">math library</a>
+* <a href="http://lua-users.org/wiki/IoLibraryTutorial">io library</a>
+* <a href="http://lua-users.org/wiki/OsLibraryTutorial">os library</a>
+
+Übrigends, die gesamte Datei ist gültiges Lua. Speichere sie als learn.lua und
+starte sie als "lua learn.lua" !
+
+Die Erstfassung ist von tylerneylon.com, und ist auch hier verfügbar: <a href="https://gist.github.com/tylerneylon/5853042">github gist</a>. Viel Spaß mit Lua!
diff --git a/de-de/make-de.html.markdown b/de-de/make-de.html.markdown
new file mode 100644
index 00000000..22c14a69
--- /dev/null
+++ b/de-de/make-de.html.markdown
@@ -0,0 +1,260 @@
+---

+language: make

+contributors:

+    - ["Robert Steed", "https://github.com/robochat"]

+translators:

+  - ["Martin Schimandl", "https://github.com/Git-Jiro"]

+filename: Makefile-de

+lang: de-de

+---

+

+Eine Makefile definiert einen Graphen von Regeln um ein Ziel (oder Ziele)

+zu erzeugen. Es dient dazu die geringste Menge an Arbeit zu verrichten um

+ein Ziel in einklang mit dem Quellcode zu bringen. Make wurde berühmterweise

+von Stuart Feldman 1976 übers Wochenende geschrieben. Make ist noch immer

+sehr verbreitet (vorallem im Unix umfeld) obwohl es bereits sehr viel

+Konkurrenz und Kritik zu Make gibt.

+

+Es gibt eine vielzahl an Varianten von Make, dieser Artikel beschäftig sich

+mit der Version GNU Make. Diese Version ist standard auf Linux.

+

+```make

+

+# Kommentare können so geschrieben werden.

+

+# Dateien sollten Makefile heißen, denn dann können sie als `make <ziel>`

+# aufgerufen werden. Ansonsten muss `make -f "dateiname" <ziel>` verwendet

+# werden.

+

+# Warnung - Es sollten nur TABULATOREN zur Einrückung im Makefile verwendet

+# werden. Niemals Leerzeichen!

+

+#-----------------------------------------------------------------------

+# Grundlagen

+#-----------------------------------------------------------------------

+

+# Eine Regel - Diese Regel wird nur abgearbeitet wenn die Datei file0.txt

+# nicht existiert.

+file0.txt:

+	echo "foo" > file0.txt

+	# Selbst Kommentare in der 'Rezept' Sektion werden an die Shell

+	# weitergegeben. Versuche `make file0.txt` oder einfach `make`

+	# die erste Regel ist die Standard-Regel.

+

+

+# Diese Regel wird nur abgearbeitet wenn file0.txt aktueller als file1.txt ist.

+file1.txt: file0.txt

+	cat file0.txt > file1.txt

+	# Verwende die selben Quoting-Regeln wie die Shell

+	@cat file0.txt >> file1.txt

+	# @ unterdrückt die Ausgabe des Befehls an stdout.

+	-@echo 'hello'

+	# - bedeutet das Make die Abarbeitung fortsetzt auch wenn Fehler passieren.

+	# Versuche `make file1.txt` auf der Kommandozeile.

+

+# Eine Regel kann mehrere Ziele und mehrere Voraussetzungen haben.

+file2.txt file3.txt: file0.txt file1.txt

+	touch file2.txt

+	touch file3.txt

+

+# Make wird sich beschweren wenn es mehrere Rezepte für die gleiche Regel gibt.

+# Leere Rezepte zählen nicht und können dazu verwendet werden weitere 

+# Voraussetzungen hinzuzufügen.

+

+#-----------------------------------------------------------------------

+# Phony-Ziele

+#-----------------------------------------------------------------------

+

+# Ein Phony-Ziel ist ein Ziel das keine Datei ist.

+# Es wird nie aktuell sein, daher wird Make immer versuchen es abzuarbeiten

+all: maker process

+

+# Es ist erlaubt Dinge ausserhalb der Reihenfolge zu deklarieren.

+maker:

+	touch ex0.txt ex1.txt

+

+# Um das Fehlschlagen von Phony-Regeln zu vermeiden wenn eine echte Datei den

+# selben namen wie ein Phony-Ziel hat:

+.PHONY: all maker process

+# Das ist ein spezielles Ziel. Es gibt noch ein paar mehr davon.

+

+# Eine Regel mit einem Phony-Ziel als Voraussetzung wird immer abgearbeitet

+ex0.txt ex1.txt: maker

+

+# Häufige Phony-Ziele sind: all make clean install ...

+

+#-----------------------------------------------------------------------

+# Automatische Variablen & Wildcards

+#-----------------------------------------------------------------------

+

+process: file*.txt	# Eine Wildcard um Dateinamen zu Vergleichen

+	@echo $^	# $^ ist eine Variable die eine Liste aller

+			# Voraussetzungen enthält.

+	@echo $@	# Namen des Ziels ausgeben.

+	#(Bei mehreren Ziel-Regeln enthält $@ den Verursacher der Abarbeitung

+	#der Regel.)

+	@echo $<	# Die erste Voraussetzung aus der Liste

+	@echo $?	# Nur die Voraussetzungen die nicht aktuell sind.

+	@echo $+	# Alle Voraussetzungen inklusive Duplikate (nicht wie Üblich)

+	#@echo $|	# Alle 'order only' Voraussetzungen

+

+# Selbst wenn wir die Voraussetzungen der Regel aufteilen, $^ wird sie finden.

+process: ex1.txt file0.txt

+# ex1.txt wird gefunden werden, aber file0.txt wird dedupliziert.

+

+#-----------------------------------------------------------------------

+# Muster

+#-----------------------------------------------------------------------

+

+# Mit Mustern kann man make beibringen wie Dateien in andere Dateien

+# umgewandelt werden.

+

+%.png: %.svg

+	inkscape --export-png $^

+

+# Muster-Vergleichs-Regeln werden nur abgearbeitet wenn make entscheidet das Ziel zu

+# erzeugen

+

+# Verzeichnis-Pfade werden normalerweise bei Muster-Vergleichs-Regeln ignoriert.

+# Aber make wird versuchen die am besten passende Regel zu verwenden.

+small/%.png: %.svg

+	inkscape --export-png --export-dpi 30 $^

+

+# Make wird die letzte Version einer Muster-Vergleichs-Regel verwenden die es

+# findet.

+%.png: %.svg

+	@echo this rule is chosen

+

+# Allerdings wird make die erste Muster-Vergleicher-Regel verwenden die das

+# Ziel erzeugen kann.

+%.png: %.ps

+	@echo this rule is not chosen if *.svg and *.ps are both present

+

+# Make hat bereits ein paar eingebaute Muster-Vergleichs-Regelen. Zum Beispiel

+# weiß Make wie man aus *.c Dateien *.o Dateien erzeugt.

+

+# Ältere Versionen von Make verwenden möglicherweise Suffix-Regeln anstatt

+# Muster-Vergleichs-Regeln.

+.png.ps:

+	@echo this rule is similar to a pattern rule.

+

+# Aktivieren der Suffix-Regel

+.SUFFIXES: .png

+

+#-----------------------------------------------------------------------

+# Variablen

+#-----------------------------------------------------------------------

+# auch Makros genannt.

+

+# Variablen sind im Grunde genommen Zeichenketten-Typen.

+

+name = Ted

+name2="Sarah"

+

+echo:

+	@echo $(name)

+	@echo ${name2}

+	@echo $name    # Das funktioniert nicht, wird als $(n)ame behandelt.

+	@echo $(name3) # Unbekannte Variablen werden als leere Zeichenketten behandelt.

+

+# Es git 4 Stellen um Variablen zu setzen.

+# In Reihenfolge der Priorität von höchster zu niedrigster:

+# 1: Befehls-Zeilen Argumente

+# 2: Makefile

+# 3: Shell Umbebungs-Variablen - Make importiert diese automatisch.

+# 3: MAke hat einige vordefinierte Variablen.

+

+name4 ?= Jean

+# Setze die Variable nur wenn es eine gleichnamige Umgebungs-Variable noch

+# nicht gibt.

+

+override name5 = David

+# Verhindert das Kommando-Zeilen Argumente diese Variable ändern können.

+

+name4 +=grey

+# Werte an eine Variable anhängen (inkludiert Leerzeichen).

+

+# Muster-Spezifische Variablen Werte (GNU Erweiterung).

+echo: name2 = Sara # Wahr innerhalb der passenden Regel und auch innerhalb

+	# rekursiver Voraussetzungen (ausser wenn es den Graphen zerstören

+	# kann wenn es zu kompilizert wird!)

+

+# Ein paar Variablen die von Make automatisch definiert werden.

+echo_inbuilt:

+	echo $(CC)

+	echo ${CXX)}

+	echo $(FC)

+	echo ${CFLAGS)}

+	echo $(CPPFLAGS)

+	echo ${CXXFLAGS}

+	echo $(LDFLAGS)

+	echo ${LDLIBS}

+

+#-----------------------------------------------------------------------

+# Variablen 2

+#-----------------------------------------------------------------------

+

+# Der erste Typ von Variablen wird bei jeder verwendung ausgewertet.

+# Das kann aufwendig sein, daher exisitert ein zweiter Typ von Variablen.

+# Diese werden nur einmal ausgewertet. (Das ist eine GNU make Erweiterung)

+

+var := hello

+var2 ::=  $(var) hello

+#:= und ::= sind äquivalent.

+

+# Diese Variablen werden prozedural ausgwertet (in der Reihenfolge in der sie

+# auftauchen), die stehen daher im wiederspruch zum Rest der Sprache!

+

+# Das funktioniert nicht

+var3 ::= $(var4) and good luck

+var4 ::= good night

+

+#-----------------------------------------------------------------------

+# Funktionen

+#-----------------------------------------------------------------------

+

+# Make verfügt über eine vielzahl von Funktionen.

+

+sourcefiles = $(wildcard *.c */*.c)

+objectfiles = $(patsubst %.c,%.o,$(sourcefiles))

+

+# Das Format ist $(func arg0,arg1,arg2...)

+

+# Ein paar Beispiele

+ls:	* src/*

+	@echo $(filter %.txt, $^)

+	@echo $(notdir $^)

+	@echo $(join $(dir $^),$(notdir $^))

+

+#-----------------------------------------------------------------------

+# Direktiven

+#-----------------------------------------------------------------------

+

+# Inkludiere andere Makefile, sehr praktisch für platformspezifischen Code

+include foo.mk

+

+sport = tennis

+# Konditionale kompiliereung

+report:

+ifeq ($(sport),tennis)

+	@echo 'game, set, match'

+else

+	@echo "They think it's all over; it is now"

+endif

+

+# Es gibt auch ifneq, ifdef, ifndef

+

+foo = true

+

+ifdef $(foo)

+bar = 'hello'

+endif

+```

+

+

+### Mehr Resourcen

+

++ [gnu make documentation](https://www.gnu.org/software/make/manual/)

++ [software carpentry tutorial](http://swcarpentry.github.io/make-novice/)

++ learn C the hard way [ex2](http://c.learncodethehardway.org/book/ex2.html) [ex28](http://c.learncodethehardway.org/book/ex28.html)

+

diff --git a/de-de/markdown-de.html.markdown b/de-de/markdown-de.html.markdown
index 6a90980b..2c838660 100644
--- a/de-de/markdown-de.html.markdown
+++ b/de-de/markdown-de.html.markdown
@@ -56,7 +56,7 @@ __Genau wie dieser.__
 **_Dieser auch!_**
 *__Und dieser genau so!__*
 
-<!-- In "Github Flavored Markdown", dem von Github verwendeten Dialekt / Parser,
+<!-- In "GitHub Flavored Markdown", dem von GitHub verwendeten Dialekt / Parser,
 gibt es auch noch durchgestrichenen Text: -->
 
 ~~Dieser Text wird durchgestrichen dargestellt.~~
@@ -148,7 +148,7 @@ indem du eine Zeile mit vier Leerzeichen oder einem Tabulator einrückst -->
 
 Hermann hatte nicht die leiseste Ahnung, was dieses `go_to()` bedeuten könnte!
 
-<!-- In "Github Flavored Markdown" gibt es für Code nocheinmal eine
+<!-- In "GitHub Flavored Markdown" gibt es für Code nocheinmal eine
 besondere Syntax -->
 
 \`\`\`ruby <!-- in "echt" musst du die Backslashes entfernen: ```ruby ! -->
@@ -157,7 +157,7 @@ def foobar
 end
 \`\`\` <!-- hier auch keine Backslashes, nur ``` -->
 
-<-- der obige Block muss nicht extra eingerückt werden, außerdem fügt Github
+<-- der obige Block muss nicht extra eingerückt werden, außerdem fügt GitHub
 Syntax-Highlighting für die nach dem ``` angegebene Sprache hinzu -->
 
 <!-- Horizontale Linie (<hr />) -->
@@ -233,7 +233,7 @@ Ich würde *diesen Teil gerne mit Sternen umschließen*, doch ohne dass er kursi
 wird. Also mache ich folgendes: \*Ich umschließe diesen Text mit Sternen\*!
 
 <!-- Tabellen -->
-<!-- Tabellen gibt es bis jetzt nur in "Github Flavored Markdown".
+<!-- Tabellen gibt es bis jetzt nur in "GitHub Flavored Markdown".
 Zudem sind sie ziemlich mühselig, aber wenn du es wirklich wissen willst: -->
 
 | Spalte1      | Spalte2  | Spalte3       |
@@ -253,4 +253,4 @@ Ganz schön hässlich | vielleicht doch lieber | wieder aufhören
 
 Mehr Informationen gibt es in [John Gruber's offiziellem Blog-Post](http://daringfireball.net/projects/markdown/syntax)
 und bei Adam Pritchards [grandiosem Cheatsheet](https://github.com/adam-p/markdown-here/wiki/Markdown-Cheatsheet).
-Infos zu Github Flavored Markdown [gibt es hier](https://help.github.com/articles/github-flavored-markdown).
\ No newline at end of file
+Infos zu GitHub Flavored Markdown [gibt es hier](https://help.github.com/articles/github-flavored-markdown).
\ No newline at end of file
diff --git a/de-de/tcl-de.html.markdown b/de-de/tcl-de.html.markdown
new file mode 100644
index 00000000..4f3b8820
--- /dev/null
+++ b/de-de/tcl-de.html.markdown
@@ -0,0 +1,475 @@
+---
+language: Tcl
+contributors:
+    - ["Poor Yorick", "http://pooryorick.com/"]
+translators:
+    - ["Martin Schimandl", "https://github.com/Git-Jiro"]
+filename: learntcl-de.tcl
+lang: de-de
+---
+
+Tcl wurde kreiert von [John Ousterhout](http://wiki.tcl.tk/John Ousterout) als
+eine wiederverwendbare Script-Sprache für Chip-Design Werkzeuge die er kreiert
+hat. Im Jahre 1997 wurde er mit dem [ACM Software System
+Award](http://en.wikipedia.org/wiki/ACM_Software_System_Award) für Tcl
+ausgezeichnet. Tcl kann sowohl als eingebettete Scipt-Sprache als auch als
+allgemeine Programmier-Sprache verwendet werden. Tcl kann auch als portable
+C-Bibliothek verwendet werden. Sogar in Fällen in denen die Script-Fähigkeiten
+nicht nötig sind. Denn Tcl stellt Daten-Strukturen wie dynamische Zeichenketten,
+Listen und Hash-Tabellen bereit. Die C-Bilbiothek stellt auch portable
+Funktionen zur Verfügung: Laden von dynamischen Bibliotheken, Zeichenketten
+formatierung und Code Konversion, Dateisystem Operationen, Netzwerk Operationen
+und mehr.
+
+
+Verschiedenste herausragende Fähigkeiten von Tcl:
+
+* Praktische Cross-Platform Netzwerk-API
+
+* Vollständig virtualisiertes Dateisystem
+
+* Stapelbare I/O Kanäle
+
+* Asynchron bis zum Kern
+
+* Vollständige Ko-Routinen
+
+* Robustes und einfach zu verwendendes Thread-Modell
+
+
+Wenn Lisp ein Listen-Prozessor ist, dann ist TCl ein Zeichenketten-Prozessor.
+Alle Werte sind Zeichenketten. Eine Liste ist ein Zeichenketten-Format. Eine
+Prozedur-Definition ist ein Zeichenketten-Format. Um leistungsfähig zu sein,
+werden Tcl-intern diese Zeichenketten in Strukutierter-Form gepuffert. Ein
+Beispiel: Der "list" Befehl arbeitet mit diesen internen gepufferten 
+Repräsentationen. Tcl kümmert sich selbständig darum die String-Repräsentationen
+zu aktualisieren, falls dies im Skript benötigt werden sollten. Das Kopieren-
+beim-Schreiben-Design von Tcl erlaubt es Skript-Authoren mit großen Daten-
+Strukturen zu arbeiten ohne zuätzlichen Speicher-Overhead. Prozeduren werden
+automatisch byte-kompiliert außer sie verwenden dynamsiche Befehle wie zum
+Beispiel "uplevel", "upvar und "trace".
+
+Es ist eine freude in Tcl zu programmieren. Hacker-Typen werden gefallen daran
+finden, wenn sie Lisp, Forth oder Smalltalk interessant finden. Tcl wird auch
+Ingenieuren und Wissenshaftlern gefallen die nur den Job erledigen wollen,
+und zwar mit Werkzeugen die sich ihrem Willen anpassen. Bei Tcl ist jegliche
+funktionalität in Befehlen ausgeführt, selbst Dinge wie Schleifen und
+Mathematische-Funktionen die bei anderen Sprachen normalerweise Teil der Syntax
+sind. Das erlaubt Tcl in den Hintergrund von Domänen spezischen Sprachen zu
+treten die das jeweilige Projekt gerade benötigt. Die Tcl-Syntax ist sehr
+leichtgewichtig. Sie ist selbst leichtgewichtiger als die Syntax von Lisp.
+Tcl steht dir einfach nicht im Weg.
+
+
+```tcl
+#! /bin/env tclsh
+
+################################################################################
+## 1. Richtlinien 
+################################################################################
+
+# Tcl ist nicht Bash oder C! Das muss gesagt werden, denn standard Shell-Quoting
+# funktioniert fast mit Tcl. Daher glauben viele sie können diese Syntax für
+# Tcl übernehmen. Am Beginn funktioniert das meist, führt aber schnell zu 
+# Frustrationen wenn die Skripte komplexer werden.
+
+# Eckige-Klammern sind nur Quoting-Mechanismen, keine Code-Block-Konstruktoren
+# und auch keine Listen-Konstruktoren. In Tcl gibt es diese beiden Dinge nicht.
+# Eckige-Klammern werden verwendet um Spezial-Zeichen in Prozeduren zu escapen
+# und in Zeichenketten die als Listen formattiert sind.
+
+################################################################################
+## 2. Syntax 
+################################################################################
+
+# Jede Zeile ist ein Befehl. Das erste Wort ist der Name des Befehls, jedes
+# weitere Wort ist ein Argument des Befehls. Wörter sind begrenzt durch
+# Leerzeichen. Da jedes Wort auch ein String ist, sind keine speziellen
+# auszeichnungen wie Anführungs-Zeichen, Klammern oder Backslashes nötig.
+# Selbst wenn Anführungs-Zeichen verwendet werden, denn sie sind ja keine
+# String-Konstruktoren, sondern nur Escape-Zeichen.
+
+set greeting1 Sal 
+set greeting2 ut
+set greeting3 ations
+
+
+# Strichpunkte begrenzen auch Befehle
+set greeting1 Sal; set greeting2 ut; set greeting3 ations 
+
+
+# Das Dollar-Zeichen zeigt eine Variablen-Substitution an.
+set greeting $greeting1$greeting2$greeting3
+
+
+# Eckige-Klammern zeigen Befehls-Substitionen an. Das Ergebnis des Befehls wird an
+# Stelle des Klammern-Ausdrucks eingefügt. Wenn man dem "set" Befehl nur den
+# Namen einer Variablen übergibt, gibt er den Wert der Variablen zurück.
+set greeting $greeting1$greeting2[set greeting3]
+
+
+# Befehls-Substitution sollte eigentlich Script-Substitution heißen, denn ein
+# komplettes Script, und nicht nur ein Befehl, kann zwischen die Eckigen-Klammern
+# geschrieben werden. Der "incr" Befehl erhöht den Wert einer Variable um 1
+# und gibt den neuen Wert der Variable zurück.
+set greeting $greeting[
+	incr i
+	incr i
+	incr i
+]
+
+
+# Der Backslash unterdrück die Bedeutung von Sonderzeichen
+set amount \$16.42
+
+
+# Der Backslash macht bestimmte Zeichen zu Sonderzeichen
+puts lots\nof\n\n\n\n\n\nnewlines
+
+# Ein Wort das in geschweiften Klammern eingeschlossen wurde ist von jeglichen
+# speziellen Interpretationen ausgeschlossen. Eine Ausnahme bilden Backslashes
+# vor geschweiften Klammern, hiermit wird die geschweifte Klammer von der Suche
+# nach der schließenden geschweiften Klammer ausgeschlossen.
+set somevar {
+    Das ist ein literales $ Zeichen, diese geschweifte Klammer \} wird nicht
+    als Ende interpretiert.
+} 
+
+
+# Bei einem Wort das in doppelten Anführungszeichen steht verlieren Leerzeichen
+# ihre spezielle Bedeutung.
+set name Neo
+set greeting "Hallo, $name"
+
+
+#Variablen-Namen können irgend eine Zeichenkette sein.
+set {first name} New
+
+
+# Die Geschweifte-Klammern-Form der Variablen-Substitution kann sehr komplexe
+# Variblen-Namen handhaben.
+set greeting "Hello, ${first name}"
+
+
+# Der "set" Befehl kann immer anstatt einer Variablen-Substition verwendet
+# werden.
+set greeting "Hello, [set {first name}]"
+
+
+# Mit dem Expansions-Operator "{*}" werden Wörter innerhalb eines Wortes wieder
+# individuell als Teile des aktuellen Befehls behandelt.
+set {*}{name Neo}
+
+# Ist Äquivalent zu
+set name Neo
+
+
+# Ein Array ist eine spezielle Varible die also Kontainer für andere Variablen
+# dient.
+set person(name) Neo
+set person(gender) male
+set greeting "Hello, $person(name)"
+
+
+# Ein Namensraum enthält Befehle und Variablen
+namespace eval people {
+    namespace eval person1 {
+        variable name Neo
+    }
+}
+
+
+#Der volle Name einer Variablen beihaltet den/die umschließenden
+# Namensraum/Namensräume begrenzt durch zwei Doppelpunkte.
+set greeting "Hello $people::person1::name"
+```
+
+```tcl
+################################################################################
+## 3. Einige Notizen 
+################################################################################
+
+# Jede weitere Funktion ist über Befehle implementiert. Von nun an kommt keine
+# neue Syntax hinzu. Alles weitere das es über Tcl zu lernen gibt ist das
+# Verhalten individueller Befehle und die bedeutung ihrer Argumente.
+
+
+# Um einen Interpreter zu bekommen mit dem man nichts mehr machen kann, lösche
+# einfach den globalen Namensraum. Das ist nicht sehr sinnvoll, zeigt aber die
+# Natur von Tcl.
+namespace delete ::
+
+
+# Wegen des Verhaltens der Namens-Auflösung ist es sicherer den "variable"
+# Befehl zu verwenden um in einem Namensraum einen Wert zu deklarieren oder
+# zuzuweisen. Wenn eine Variable mit dem namen "name" bereits im globalen
+# Namensraum existiert, bewirkt der "set" Befehl das der globalen Variable ein
+# Wert zugewiesen wird, anstatt eine Variable im lokalen Namensraum zu erzeugen
+namespace eval people {
+    namespace eval person1 {
+        variable name Neo
+    }
+}
+
+
+# Es kann immer der vollständige Name einer Variable verwendet werden, falls
+# gewünscht.
+set people::person1::name Neo
+
+
+
+################################################################################
+## 4. Befehle 
+################################################################################
+
+# Berechnungen werde mit dem "expr" Befehl durchgeführt.
+set a 3
+set b 4
+set c [expr {$a + $b}]
+
+# Since "expr" performs variable substitution on its own, brace the expression
+# to prevent Tcl from performing variable substitution first.  See
+
+# Da der "expr" Befehl eigene Variablen-Substitutionen durchführt, setze den
+# zu berechnenden Ausdruck in Eckige-Klammern. Das hindert Tcl daran Variablen-
+# Substitutionen durchzuführen. Für Details siehe:
+# "http://wiki.tcl.tk/Brace%20your%20#%20expr-essions"
+
+
+# Der "expr" Befehl versteht Variablen- und Befehls-Substitutionen
+set c [expr {$a + [set b]}]
+
+
+# Der "expr" Befehl stellt Mathematische-Funktionen zur Verfügung.
+set c [expr {pow($a,$b)}]
+
+
+# Mathematische Operatoren sind als Befehle auch im Namensraum 
+# ::tcl::mathop verfügbar.
+::tcl::mathop::+ 5 3
+
+# Befehle können aus anderen Namensräumen importiert werden.
+namespace import ::tcl::mathop::+
+set result [+ 5 3]
+
+
+# Neu Befehle werden mit dem "proc" Befehl gebildet.
+proc greet name {
+    return "Hello, $name!"
+}
+
+#Es können mehrere Parameter spezifiziert werden.
+proc greet {greeting name} {
+    return "$greeting, $name!"
+}
+
+
+# Wie bereits erwähnt, geschwungene Klammern erzeugen keinen Code-Block.
+# Jeder Wert, sogar das dritte Argument für den "proc" Befehl ist eine
+# Zeichenkette. Der vorherige Befehl kann daher auch ohne
+# geschwungene Klammern geschrieben werden:
+proc greet greeting\ name return\ \"Hello,\ \$name!
+
+
+
+# Wenn der letzte Parameter der literale Wert "args" ist, sammelt dieser Wert
+# alle übrigen Argumente des Befehls ein wenn dieser aufgerufen wird.
+proc fold {cmd args} {
+    set res 0
+    foreach arg $args {
+        set res [$cmd $res $arg]
+    }
+}
+fold ::tcl::mathop::* 5 3 3 ;# ->  45
+
+
+# Bedingte Ausführung ist auch als Befehl implementiert
+if {3 > 4} {
+    puts {This will never happen}
+} elseif {4 > 4} {
+    puts {This will also never happen}
+} else {
+    puts {This will always happen}
+}
+
+
+# Auch Schleifen sind Befehle. Das erste, zweite und dritte Argument des "for"
+# Befehls wird als mathematischer Ausdruck behandelt.
+for {set i 0} {$i < 10} {incr i} {
+    set res [expr {$res + $i}]
+}
+
+
+# Das erste Argument des "while" Befehls wird auch als mathematischer Ausdruck
+# behandelt.
+set i 0
+while {$i < 10} {
+    incr i 2
+}
+
+
+# Eine Liste ist eine speziell formatierte Zeichenkette. Im einfachsten Fall
+# genügen Leerzeichen als Trennzeichen zwischen den einzelnen Werten.
+set amounts 10\ 33\ 18 
+set amount [lindex $amounts 1]
+
+
+# Geschwungene Klammern und Backslashes können verwendet werden um komplexe
+# Werte in einer Liste zu formatieren. Eine Liste sieht aus wie ein Skript,
+# allerdings verlieren verlieren Zeilenumbrüche und Doppelüunkte ihre 
+# besondere Bedeutung. Diese Funktionalität macht Tcl homoikonisch. Die
+# folgende Liste enhtält drei Elemente.
+set values {
+
+    one\ two
+
+    {three four}
+
+    five\{six
+
+}
+
+
+# Da Listen auch Zeichenketten sind, kann man Zeichenketten-Operationen auf
+# ihnen anwenden. Allerdings mit dem Risiko die Formatierung der Liste zu
+# beschädigen.
+set values {one two three four}
+set values [string map {two \{} $values] ;# $values is no-longer a \
+    properly-formatted listwell-formed list
+
+
+# Der sicherste Weg korrekt formatierte Liste zu erzeugen, ist den "list"
+# Befehl zu verwenden.
+set values [list one \{ three four]
+lappend values { } ;# Ein Leerzeichen als Element der Liste hinzufügen
+
+
+# Mit "eval" können Werte als Skripts evaluiert weden.
+eval {
+    set name Neo
+    set greeting "Hello, $name"
+}
+
+
+# Eine Liste kann immer an "eval" übergeben werden, solange die Liste einen
+# einzigen Befehl entält.
+eval {set name Neo}
+eval [list set greeting "Hello, $name"]
+
+
+# Daher: Wenn "eval" verwendet wird, verwende [list] um den gewünschten Befehl
+# aufzubauen.
+set command {set name}
+lappend command {Archibald Sorbisol}
+eval $command
+
+
+# Es ist ein häufiger Fehler die Listen funktionen beim Aufbauen von Listen
+# nicht zu verwenden.
+set command {set name}
+append command { Archibald Sorbisol}
+eval $command ;# Hier passiert eine Fehler, denn der "set" Befehl hat nun zu \
+    viele Argumente {set name Archibald Sorbisol}
+
+
+# Dieser Fehler kann auch leicht beim "subst" Befehl passieren.
+set replacement {Archibald Sorbisol}
+set command {set name $replacement}
+set command [subst $command] 
+eval $command ;# The same error as before: too many arguments to "set" in \
+    {set name Archibald Sorbisol}
+
+
+# Die korrekte Vorgangsweise ist es den substituierten Wert mit dem "list"
+# Befehl zu formatieren.
+set replacement [list {Archibald Sorbisol}]
+set command {set name $replacement}
+set command [subst $command] 
+eval $command
+
+
+# Der "list" Befehl wird sehr häufig verwendet um Werte zu formatieren die
+# in Tcl Skript Vorlagen substituiert werden. Es gibt dazu viele Beispiele,
+# siehe unterhalb.
+
+
+# Der "apply" Befehl evaluiert eine Zeichenkette als Befehl.
+set cmd {{greeting name} {
+    return "$greeting, $name!"
+}}
+apply $cmd Whaddup Neo
+
+
+# Der "uplevel" Befehl evaluiert ein Skript in einem höher liegenden
+Gültigkeitsbereich.
+proc greet {} {
+	uplevel {puts "$greeting, $name"}
+}
+
+proc set_double {varname value} {
+	if {[string is double $value]} {
+		uplevel [list variable $varname $value]
+	} else {
+		error [list {not a double} $value]
+	}
+}
+
+
+# Der "upvar" Befehl verknüpft eine Variable im aktuellen Gültigkeitsbereich
+# mit einer Variable in einem höher liegenden Gültigkeitsbereich.
+proc set_double {varname value} {
+	if {[string is double $value]} {
+		upvar 1 $varname var
+		set var $value
+	} else {
+		error [list {not a double} $value]
+	}
+}
+
+
+# Werde den eingebauten "while" Befehl los.
+rename ::while {}
+
+
+# Definieren einen neuen "while" Befehl mit hilfe des "proc" Befehls.
+# Ausführlichere Fehler-Behandlung wird dem Leser als Übung überlassen.
+proc while {condition script} {
+    if {[uplevel 1 [list expr $condition]]} {
+        uplevel 1 $script
+        tailcall [namespace which while] $condition $script
+    }
+}
+
+
+# Der "coroutine" Befehl erzeugt einen separaten Call-Stack, zusammen mit einem
+# Befehl um diesem Call-Stack zu verwenden. Der "yield" Befehl unterbricht
+# die Ausführung des aktuellen Call-Stacks.
+proc countdown {} {
+	#send something back to the initial "coroutine" command
+	yield
+
+	set count 3 
+	while {$count > 1} {
+		yield [incr count -1]
+	}
+	return 0
+}
+coroutine countdown1 countdown
+coroutine countdown2 countdown
+puts [countdown 1] ;# -> 2 
+puts [countdown 2] ;# -> 2 
+puts [countdown 1] ;# -> 1 
+puts [countdown 1] ;# -> 0 
+puts [coundown 1] ;# -> invalid command name "countdown1"
+puts [countdown 2] ;# -> 1 
+
+
+```
+
+## Referenzen
+
+[Official Tcl Documentation](http://www.tcl.tk/man/tcl/)
+
+[Tcl Wiki](http://wiki.tcl.tk)
+
+[Tcl Subreddit](http://www.reddit.com/r/Tcl)
diff --git a/elixir.html.markdown b/elixir.html.markdown
index bf3c42a6..eb708576 100644
--- a/elixir.html.markdown
+++ b/elixir.html.markdown
@@ -170,7 +170,7 @@ case {:one, :two} do
   {:four, :five} ->
     "This won't match"
   {:one, x} ->
-    "This will match and bind `x` to `:two`"
+    "This will match and bind `x` to `:two` in this clause"
   _ ->
     "This will match any value"
 end
diff --git a/elm.html.markdown b/elm.html.markdown
index 944ab770..fa10671f 100644
--- a/elm.html.markdown
+++ b/elm.html.markdown
@@ -85,7 +85,7 @@ snd ("elm", 42) -- 42
 -- Access a field with a dot and the field name.
 { x = 3, y = 7 }.x -- 3
 
--- Or with an accessor fuction, which is a dot and the field name on its own.
+-- Or with an accessor function, which is a dot and the field name on its own.
 .y { x = 3, y = 7 } -- 7
 
 -- Update the fields of a record. (It must have the fields already.)
@@ -309,7 +309,7 @@ import Graphics.Collage as C
 -- An incoming port is just a type signature.
 port clientID : Int
 
--- An outgoing port has a defintion.
+-- An outgoing port has a definition.
 port clientOrders : List String
 port clientOrders = ["Books", "Groceries", "Furniture"]
 
@@ -342,7 +342,7 @@ $ elm package diff evancz/elm-html 3.0.0 4.0.2
 ```
 
 The Elm language is surprisingly small. You can now look through almost any Elm
-source code and have a rough idea of what is going on. However, the possibilties
+source code and have a rough idea of what is going on. However, the possibilities
 for error-resistant and easy-to-refactor code are endless!
 
 Here are some useful resources.
diff --git a/es-es/forth-es.html.markdown b/es-es/forth-es.html.markdown
new file mode 100644
index 00000000..05dc0cc5
--- /dev/null
+++ b/es-es/forth-es.html.markdown
@@ -0,0 +1,226 @@
+---
+language: forth
+contributors:
+    - ["Horse M.D.", "http://github.com/HorseMD/"]
+translators:
+    - ["Zach Larsen", "http://zachariahlarsen.com/"]
+lang: es-es
+filename: learnforth-es.fs
+---
+
+Forth fue criado por Charles H. Moore en los 70s. Forth es un lenguaje imperativo, basado en pila y entorno de programación, siendo usado en proyectos como Open Firmware. También esta usado por NASA.
+
+Nota: Este articulo enfoca predominantemente en la Gforth implementación de Forth, pero casi todo 
+de lo que esta escrito aquí debe funcionar en otro sitio.
+
+```
+\ Este es un comentario
+( Este es un comentario también pero solo esta usado cuando definiendo palabras. )
+
+\ --------------------------------- Precursor ----------------------------------
+
+\ Todo programación en Forth se hace manipulando el parámetro pila (mas
+\ común se refiere como "el pila").
+5 2 3 56 76 23 65    \ ok
+
+\ estos números se añadieron al pila desde izquierda a derecho.
+.s    \ <7> 5 2 3 56 76 23 65 ok
+
+\ En Forth, todo es o una palabra o un numero.
+
+\ ------------------------------ Básico Aritmética ------------------------------
+
+\ Aritmética (de hecho casi todas palabras que requieren datos) funciona manipulando datos
+\ en el pila.
+5 4 +    \ ok
+
+\ `.` saca lo alto resulto desde el pila:
+.    \ 9 ok
+
+\ Mas ejemplos de aritmética:
+6 7 * .        \ 42 ok
+1360 23 - .    \ 1337 ok
+12 12 / .      \ 1 ok
+13 2 mod .     \ 1 ok
+
+99 negate .    \ -99 ok
+-99 abs .      \ 99 ok
+52 23 max .    \ 52 ok
+52 23 min .    \ 23 ok
+
+\ ----------------------------- Pila Manipulación -----------------------------
+
+\ Naturalmente, cuando trabajaremos con el pila, querremos algunos metidos útiles:
+
+3 dup -          \ duplicar el primero articulo (1ra ahora igual a 2da): 3 - 3
+2 5 swap /       \ intercambiar la primera con la segunda elemento:        5 / 2
+6 4 5 rot .s     \ rotar los tres primero elementos:                   4 5 6
+4 0 drop 2 /     \ sacar el primero articulo (no imprima a la pantalla):  4 / 2
+1 2 3 nip .s     \ sacar el segundo articulo (similar a drop):    1 3
+
+\ ---------------------- Mas Avanzado Pila Manipulación ----------------------
+
+1 2 3 4 tuck   \ duplicar el primero articulo en el segundo hueco:      1 2 4 3 4 ok
+1 2 3 4 over   \ duplicar el segundo articulo a la primera del pila:      1 2 3 4 3 ok
+1 2 3 4 2 roll \ *mover* el articulo en este posición a la primera del pila:      1 3 4 2 ok
+1 2 3 4 2 pick \ *duplicar* el articulo en este posición a la primera del pila: 1 2 3 4 2 ok
+
+\ Cuando refiere a pila indices, ellos son basado en cero.
+
+\ ------------------------------ Creando Palabras --------------------------------
+
+\ La `:` palabra hace que Forth entra modo de compilar hasta que se ve la `;` palabra.
+: cuadrado ( n -- n ) dup * ;    \ ok
+5 cuadrado .                     \ 25 ok
+
+\ Podemos ver lo que hace una palabra también.:
+see cuadrado     \ : cuadrado dup * ; ok
+
+\ -------------------------------- Condicionales --------------------------------
+
+\ -1 == cierto, 0 == falso. No obstante, valores que no son cero es usualmente tratado como
+\ siendo cierto:
+42 42 =    \ -1 ok
+12 53 =    \ 0 ok
+
+\ `if` es una palabra que solamente compila. `if` <cosas para hacer> `then` <los de mas del programa>.
+: ?>64 ( n -- n ) dup 64 > if ." Mas que 64!" then ; \ ok
+100 ?>64                                                  \ Mas que 64! ok
+
+\ Else:
+: ?>64 ( n -- n ) dup 64 > if ." Mas que 64!" else ." Menos que 64!" then ;
+100 ?>64    \ Mas que 64! ok
+20 ?>64     \ Menos que 64! ok 
+
+\ ------------------------------------ Loops -----------------------------------
+
+\ `do` también es una palabra que solamente compila.
+: miloop ( -- ) 5 0 do cr ." Hola!" loop ; \ ok
+miloop
+\ Hola!
+\ Hola!
+\ Hola!
+\ Hola!
+\ Hola! ok
+
+\ `do` espera dos números en el pila: el último numero y el primero numero.
+
+\ Podemos recibir el valor del indice mientras damos vuelta con `i`:
+: uno-a-12 ( -- ) 12 0 do i . loop ;     \ ok
+uno-a-12                                 \ 0 1 2 3 4 5 6 7 8 9 10 11 12 ok
+
+\ `?do` funciona similarmente, pero salta el loop si el último y primero
+\ números son iguales.
+: cuadrados ( n -- ) 0 ?do i cuadrado . loop ;   \ ok
+10 cuadrado                              \ 0 1 4 9 16 25 36 49 64 81 ok
+
+\ cambiar el "paso" con `+loop`:
+: treces ( n n -- ) ?do i . 3 +loop ;    \ ok
+15 0 treces                             \ 0 3 6 9 12 ok
+
+\ Indefinido loops empiezan `begin` <cosas para hacer> <bandera> `until`:
+: death ( -- ) begin ." Ya hemos llegado?" 0 until ;    \ ok
+
+\ ---------------------------- Variables y Memoria ----------------------------
+
+\ Use `variable` declarar `edad` ser un variable.
+variable edad    \ ok
+
+\ Ahora escribimos 21 a edad con la palabra `!`.
+21 edad !    \ ok
+
+\ Por fin podemos imprimir nuestro variable usando la "leer" palabra `@`, que agregue el
+\ valor a la pila, or usa `?` que lee y imprime todo juntos.
+edad @ .    \ 21 ok
+edad ?      \ 21 ok
+
+\ Constantes son muy similar, pero no nos importa los direcciones de memoria:
+100 constant PUNTA-QUE-AQUA-HIERVA   \ ok
+PUNTA-QUE-AQUA-HIERVA .               \ 100 ok
+
+\ ----------------------------------- Arrays -----------------------------------
+
+\ Creando arrays es similar a variables, pero necesitamos alocar mas
+\ memoria a ellos.
+
+\ Puede usar `2 cells allot` para crear un array que es sea 3 cédulas de tamaño:
+variable minumeros 2 cells allot    \ ok
+
+\ Inicializar todos los valores a 0
+minumeros 3 cells erase    \ ok
+
+\ Alternativamente podemos usar `fill`:
+minumeros 3 cells 0 fill
+
+\ o podemos saltar todo arriba y inicializar con valores específicos:
+create minumeros 64 , 9001 , 1337 , \ ok (el último `,` es importante!)
+
+\ ...que es equivalente a:
+
+\ Manualmente escribiendo valores a cada indice:
+64 minumeros 0 cells + !      \ ok
+9001 minumeros 1 cells + !    \ ok
+1337 minumeros 2 cells + !    \ ok
+
+\ Leyendo valores en particular array indices:
+0 cells minumeros + ?    \ 64 ok
+1 cells minumeros + ?    \ 9001 ok
+
+\ Podemos simplificar un poco cuando hacemos una palabra que ayuda cuando manipulando arrays:
+: de-arr ( n n -- n ) cells + ;    \ ok
+minumeros 2 de-arr ?               \ 1337 ok
+
+\ Que podemos usar cuando escribimos también:
+20 minumeros 1 de-arr !    \ ok
+minumeros 1 de-arr ?       \ 20 ok
+
+\ ------------------------------ El Pila de Regreso ------------------------------
+
+\ El pila de regreso se usa para retener punteros a cosas cuando palabras están
+\ ejecutando otras palabras como loops.
+
+\ Ya hemos visto un uso de esto: `i`, que duplica el primero del pila
+\ de regreso. `i` es equivalente a `r@`.
+: miloop ( -- ) 5 0 do r@ . loop ;    \ ok
+
+\ También como leyendo, podemos agregar al pila de regreso y sacarlo:
+5 6 4 >r swap r> .s    \ 6 5 4 ok
+
+\ NOTA: Porque Forth usa el pila de regreso por punteros de palabras,  `>r` debe
+\ siempre ser seguido por un `r>`.
+
+\ ------------------------- Flotante Punto Operaciones --------------------------
+
+\ La mayoría Forths evitan el uso de flotante punto operaciones.
+8.3e 0.8e f+ f.    \ 9.1 ok
+
+\ Usualmente agregamos al frente palabras con 'f' cuando usando flotantes:
+variable miflotantevar    \ ok
+4.4e miflotantevar f!     \ ok
+miflotantevar f@ f.       \ 4.4 ok
+
+\ --------------------------------- Notas al Final --------------------------------
+
+\ Usando una palabra que no existe vaciara el pila. No obstante, también hay una palabra
+\ específicamente por esto:
+clearstack
+
+\ vaciar la pantalla:
+page
+
+\ Cargando Forth archivos:
+\ s" archivodeforth.fs" included
+
+\ Puede listar cada palabra en el diccionario de Forth (pero es una lista gigante!):
+\ words
+
+\ Terminando Gforth:
+\ bye
+
+```
+
+##Listo Para Mas?
+
+* [Starting Forth](http://www.forth.com/starting-forth/)
+* [Simple Forth](http://www.murphywong.net/hello/simple.htm)
+* [Thinking Forth](http://thinking-forth.sourceforge.net/)
diff --git a/es-es/hack-es.html.markdown b/es-es/hack-es.html.markdown
new file mode 100644
index 00000000..1059117a
--- /dev/null
+++ b/es-es/hack-es.html.markdown
@@ -0,0 +1,307 @@
+---
+language: Hack
+contributors:
+    - ["Stephen Holdaway", "https://github.com/stecman"]
+    - ["David Lima", "https://github.com/davelima"]
+translators:
+    - ["César Suárez", "https://github.com/csuarez"]
+lang: es-es
+filename: learnhack-es.hh
+---
+
+Hack es un superconjunto de PHP que se ejecuta en una máquina virtual llamada HHVM. Hack es casi totalmente compatible con código PHP ya existente y añade varias características típicas de los lenguajes de programación estáticamente tipados.
+
+En este artículo sólo se cubren las características específicas de Hack. Los detalles sobre la sintaxis de PHP están en el [artículo sobre PHP](http://learnxinyminutes.com/docs/php/) de esta misma web.
+
+```php
+<?hh
+
+// La sintaxis de Hack sólo se habilita para los ficheros que comienzan con
+// un marcador <?hh. Estos marcadores no pueden intercalarse con código HTML,
+// tal como se puede hacer con <?php. Al usar el marcador "<?hh //strict" el
+// comprobador de tipado en modo estricto se pone en modo estricto.
+
+// Indicando el tipo de parámetros escalares
+function repeat(string $word, int $count)
+{
+    $word = trim($word);
+    return str_repeat($word . ' ', $count);
+}
+
+// Indicando el tipo que devuelve una función
+function add(...$numbers) : int
+{
+    return array_sum($numbers);
+}
+
+// Las funciones que no devuelven nada usan el tipo "void"
+function truncate(resource $handle) : void
+{
+    // ...
+}
+
+// Al determinar un tipo, hay que indicar explícitamente si permite el valor 
+// NULL
+function identity(?string $stringOrNull) : ?string
+{
+    return $stringOrNull;
+}
+
+// Se puede especificar el tipo de las propiedades de una clase
+class TypeHintedProperties
+{
+    public ?string $name;
+    
+    protected int $id;
+
+    private float $score = 100.0;
+
+	// El comprobador de tipos de Hack fuerza que las propiedades tipadas
+	// tengan un valor por defecto o que estén asignadas en el constructor
+    public function __construct(int $id)
+    {
+        $this->id = $id;
+    }
+}
+
+
+// Funciones anónimas concisas (lambdas)
+$multiplier = 5;
+array_map($y ==> $y * $multiplier, [1, 2, 3]);
+
+
+// Genéricos
+class Box<T>
+{
+    protected T $data;
+
+    public function __construct(T $data) {
+        $this->data = $data;
+    }
+
+    public function getData(): T {
+        return $this->data;
+    }
+}
+
+function openBox(Box<int> $box) : int
+{
+    return $box->getData();
+}
+
+
+// Shapes
+//
+// Hack añade el concepto de shape para definir estructuras similares a
+// vectores, pero con un conjunto de claves garantizado y tipado
+type Point2D = shape('x' => int, 'y' => int);
+
+function distance(Point2D $a, Point2D $b) : float
+{
+    return sqrt(pow($b['x'] - $a['x'], 2) + pow($b['y'] - $a['y'], 2));
+}
+
+distance(
+    shape('x' => -1, 'y' => 5),
+    shape('x' => 2, 'y' => 50)
+);
+
+
+// Alias de tipos
+//
+// Hack permite crear alias para hacer que los tipos complejos sean más legibles
+newtype VectorArray = array<int, Vector<int>>;
+
+// Una tupla que contiene dos enteros
+newtype Point = (int, int);
+
+function addPoints(Point $p1, Point $p2) : Point
+{
+    return tuple($p1[0] + $p2[0], $p1[1] + $p2[1]);
+}
+
+addPoints(
+    tuple(1, 2),
+    tuple(5, 6)
+);
+
+
+// Enumerados de primera clase
+enum RoadType : int
+{
+    Road = 0;
+    Street = 1;
+    Avenue = 2;
+    Boulevard = 3;
+}
+
+function getRoadType() : RoadType
+{
+    return RoadType::Avenue;
+}
+
+
+// Promoción de argumentos en constructores
+//
+// Para evitar repetir una y otra vez la definición de constructores que
+// sólo asignan propiedades, Hack añade una sintaxis concisa para definir
+// propiedades junto al constructor.
+class ArgumentPromotion
+{
+    public function __construct(public string $name,
+                                protected int $age,
+                                private bool $isAwesome) {}
+}
+
+class WithoutArgumentPromotion
+{
+    public string $name;
+
+    protected int $age;
+
+    private bool $isAwesome;
+
+    public function __construct(string $name, int $age, bool $isAwesome)
+    {
+        $this->name = $name;
+        $this->age = $age;
+        $this->isAwesome = $isAwesome;
+    }
+}
+
+
+// Multitarea cooperativa
+//
+// "async" y "await" son dos palabras claves nuevas para realizar multi-tarea.
+// Esto no implica que se usen hilos, sólo permiten transferir el control de la 
+// ejecución.
+{
+    for ($i = $start; $i <= $end; $i++) { 
+        echo "$i ";
+
+        // Da a otras tareas la oportunidad de hacer algo
+        await RescheduleWaitHandle::create(RescheduleWaitHandle::QUEUE_DEFAULT, 0);
+    }
+}
+
+// Esto imprime "1 4 7 2 5 8 3 6 9"
+AwaitAllWaitHandle::fromArray([
+    cooperativePrint(1, 3),
+    cooperativePrint(4, 6),
+    cooperativePrint(7, 9)
+])->getWaitHandle()->join();
+
+
+// Atributos
+//
+// Los atributos son una especie de metadatos para funciones. Hack implementa
+// algunos atributos especiales para introducir esta característica.
+
+// El atributo especial __Memoize hace que el resultado de la función se cacheé.
+<<__Memoize>>
+function doExpensiveTask() : ?string
+{
+    return file_get_contents('http://example.com');
+}
+
+// Esta función se va a ejecutar sólo una vez:
+doExpensiveTask();
+doExpensiveTask();
+
+
+// El atributo __ConsistentConstruct indica al comprobador de tipos de Hack que
+// asegure que la signatura de __construct sea la misma para todas las
+// subclases.
+<<__ConsistentConstruct>>
+class ConsistentFoo
+{
+    public function __construct(int $x, float $y)
+    {
+        // ...
+    }
+
+    public function someMethod()
+    {
+        // ...
+    }
+}
+
+class ConsistentBar extends ConsistentFoo
+{
+    public function __construct(int $x, float $y)
+    {
+		 // El comprobador de tipos de Hack fuerza que los constructores de 
+		 // los padres sean llamados.
+        parent::__construct($x, $y);
+
+        // ...
+    }
+
+    // La anotación __Override es un atributo opcional para que el comprobador
+    // de tipos fuerce que ese método esté sobrecargando un método de un padre
+    // o de un trait. Sino, fallará.
+    <<__Override>>
+    public function someMethod()
+    {
+        // ...
+    }
+}
+
+class InvalidFooSubclass extends ConsistentFoo
+{
+	// Este constructor no coincide con el padre y causará el siguiente error:
+	//
+	//  "This object is of type ConsistentBaz. It is incompatible with this 
+	//   object of type ConsistentFoo because some of their methods are 
+	//   incompatible"
+    public function __construct(float $x)
+    {
+        // ...
+    }
+
+    // Usando la anotación __Override en un método que no sobrecarga nada se
+    // producirá el siguiente error:
+    //
+    //  "InvalidFooSubclass::otherMethod() is marked as override; no non-private
+    //   parent definition found or overridden parent is defined in non-<?hh 
+    //   code"
+    <<__Override>>
+    public function otherMethod()
+    {
+        // ...
+    }
+}
+
+
+// Los traits pueden implementar interfaces (PHP no soporta esto).
+interface KittenInterface
+{
+    public function play() : void;
+}
+
+trait CatTrait implements KittenInterface
+{
+    public function play() : void
+    {
+        // ...
+    }
+}
+
+class Samuel
+{
+    use CatTrait;
+}
+
+
+$cat = new Samuel();
+$cat instanceof KittenInterface === true; // True
+
+```
+
+## Más información
+
+Para obtener una explicación más detallada de las características que añade Hack a PHP visita la página de [referencia de Hack](http://docs.hhvm.com/manual/en/hacklangref.php) o la [página oficial de Hack](http://hacklang.org/) para información de caracter más general.
+
+Visita la [página oficial de HHVM](http://hhvm.com/) para ver las instrucciones de su instalación.
+
+También puedes visitar la [sección de características de PHP no soportadas por Hack](http://docs.hhvm.com/manual/en/hack.unsupported.php) para más detalles sobre la retrocompatibilidad entre Hack y PHP.
diff --git a/es-es/javascript-es.html.markdown b/es-es/javascript-es.html.markdown
index 9ef0c63e..34428f42 100644
--- a/es-es/javascript-es.html.markdown
+++ b/es-es/javascript-es.html.markdown
@@ -23,7 +23,9 @@ Aunque JavaScript no sólo se limita a los navegadores web: Node.js, Un proyecto
 [adam@brenecki.id.au](mailto:adam@brenecki.id.au).
 
 ```js
-// Los comentarios son como en C. Los comentarios de una sola línea comienzan con //,
+// Los comentarios en JavaScript son los mismos como comentarios en C. 
+
+//Los comentarios de una sola línea comienzan con //,
 /* y los comentarios multilínea comienzan
    y terminan con */
 
diff --git a/es-es/markdown-es.html.markdown b/es-es/markdown-es.html.markdown
index bc481df7..0505b4cb 100644
--- a/es-es/markdown-es.html.markdown
+++ b/es-es/markdown-es.html.markdown
@@ -57,8 +57,8 @@ __Al igual que este texto.__
 **_Al igual que este!_**
 *__¡Y este!__*
 
-<!-- En Github Flavored Markdown, el cual es usado para mostrar archivos 
-Markdown en Github, también tenemos: -->
+<!-- En GitHub Flavored Markdown, el cual es usado para mostrar archivos 
+Markdown en GitHub, también tenemos: -->
 
 ~~Este texto está tachado.~~
 
@@ -150,7 +150,7 @@ para indentar dentro del código -->
 
 ¡John no sabía lo que la función `go_to()` hacía!
 
-<!-- Con Github Flavored Markdown, puedes usar una sintaxis especial para código -->
+<!-- Con GitHub Flavored Markdown, puedes usar una sintaxis especial para código -->
 
 \`\`\`ruby <!-- quita esas comillas cuando lo hagas, deja sólo ```ruby ! -->
 def foobar
@@ -158,7 +158,7 @@ def foobar
 end
 \`\`\` <!-- aquí también, sin comillas, sólo ``` -->
 
-<!-- El texto de arriba no necesita indentación, aparte Github usará
+<!-- El texto de arriba no necesita indentación, aparte GitHub usará
 resaltará la sintaxis del lenguaje que especifiques después de ``` -->
 
 <!-- Regla horizontal (<hr />) -->
@@ -231,7 +231,7 @@ Quiero escribir *este texto rodeado por asteriscos* pero no quiero que esté en
 así que hago esto: \*Este texto está rodeado de asteriscos\*.
 
 <!-- Tablas -->
-<!-- Las tablas sólo están disponibles en Github Flavored Markdown y son un poco pesadas,
+<!-- Las tablas sólo están disponibles en GitHub Flavored Markdown y son un poco pesadas,
 pero si de verdad las quieres: -->
 
 | Col1         | Col2     | Col3          |
diff --git a/es-es/objective-c-es.html.markdown b/es-es/objective-c-es.html.markdown
new file mode 100644
index 00000000..bdbce524
--- /dev/null
+++ b/es-es/objective-c-es.html.markdown
@@ -0,0 +1,851 @@
+---
+language: Objective-C
+contributors:
+    - ["Eugene Yagrushkin", "www.about.me/yagrushkin"]
+    - ["Yannick Loriot", "https://github.com/YannickL"]
+    - ["Levi Bostian", "https://github.com/levibostian"]
+translators:
+    - ["David Hsieh", "http://github.com/deivuh"]
+lang: es-es
+filename: LearnObjectiveC-es.m
+---
+Objective C es el lenguaje de programación principal utilizado por Apple para los sistemas operativos OS X y iOS y sus respectivos frameworks, Cocoa y Cocoa Touch.
+Es un lenguaje de programación para propósito general que le agrega al lenguaje de programación C una mensajería estilo "Smalltalk".
+
+
+```objective_c
+// Los comentarios de una sola línea inician con //
+
+/*
+Los comentarios de múltiples líneas se ven así.
+*/
+
+// Importa los encabezados de Foundation con #import
+// Utiliza <> para importar archivos globales (generalmente frameworks)
+// Utiliza "" para importar archivos locales (del proyecto)
+#import <Foundation/Foundation.h>
+#import "MyClass.h"
+
+// Si habilitas módulos para proyectos de iOS >= 7.0 u OS X >= 10.9 en
+// Xcode 5, puedes importarlos de la siguiente manera:
+@import Foundation;
+
+// El punto de entrada de tu programa es una función llamada 
+// main con un tipo de retorno entero. 
+int main (int argc, const char * argv[])
+{
+    // Crear un autorelease pool para manejar la memoria al programa
+    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
+    // Si se utiliza el conteo automático de referencias (ARC), 
+    // utiliza @autoreleasepool:    
+    @autoreleasepool {
+
+    // Utiliza NSLog para imprimir líneas a la consola
+    NSLog(@"Hello World!"); // Imprimir el string "Hello World!"
+ 
+    ///////////////////////////////////////
+    // Tipos y variables
+    ///////////////////////////////////////
+    
+    // Declaraciones de primitivos
+    int myPrimitive1  = 1;
+    long myPrimitive2 = 234554664565;
+    
+    // Declaraciones de objetos
+    // Pon el * como prefijo de los nombre de las variables para declaraciones
+    // de objetos de tipos fuertes 
+    MyClass *myObject1 = nil;  // Tipo fuerte
+    id       myObject2 = nil;  // Tipo débil
+    // %@ es un objeto
+    // 'description' es una convención para mostrar el valor de los objetos
+    NSLog(@"%@ and %@", myObject1, [myObject2 description]); 
+    // imprime => "(null) and (null)"
+    
+    // String
+    NSString *worldString = @"World";
+    NSLog(@"Hello %@!", worldString); // imprime => "Hello World!" 
+    // NSMutableString es una versión mutable del objeto NSString
+    NSMutableString *mutableString = [NSMutableString stringWithString:@"Hello"];
+    [mutableString appendString:@" World!"];
+    NSLog(@"%@", mutableString); // imprime => "Hello World!"
+    
+    // Literales de caracteres
+    NSNumber *theLetterZNumber = @'Z';
+    char theLetterZ            = [theLetterZNumber charValue]; // o 'Z'
+    NSLog(@"%c", theLetterZ);
+
+    // Literales de enteros
+    NSNumber *fortyTwoNumber = @42;
+    int fortyTwo             = [fortyTwoNumber intValue]; // o 42
+    NSLog(@"%i", fortyTwo);
+    
+    NSNumber *fortyTwoUnsignedNumber = @42U;
+    unsigned int fortyTwoUnsigned    = [fortyTwoUnsignedNumber unsignedIntValue]; // o 42
+    NSLog(@"%u", fortyTwoUnsigned);
+    
+    NSNumber *fortyTwoShortNumber = [NSNumber numberWithShort:42];
+    short fortyTwoShort           = [fortyTwoShortNumber shortValue]; // o 42
+    NSLog(@"%hi", fortyTwoShort);
+
+    NSNumber *fortyOneShortNumber   = [NSNumber numberWithShort:41];
+    unsigned short fortyOneUnsigned = [fortyOneShortNumber unsignedShortValue]; // o 41
+    NSLog(@"%u", fortyOneUnsigned);
+    
+    NSNumber *fortyTwoLongNumber = @42L;
+    long fortyTwoLong            = [fortyTwoLongNumber longValue]; // o 42
+    NSLog(@"%li", fortyTwoLong);
+
+    NSNumber *fiftyThreeLongNumber   = @53L;
+    unsigned long fiftyThreeUnsigned = [fiftyThreeLongNumber unsignedLongValue]; // o 53
+    NSLog(@"%lu", fiftyThreeUnsigned);
+
+    // Literales de punto flotante
+    NSNumber *piFloatNumber = @3.141592654F;
+    float piFloat           = [piFloatNumber floatValue]; // o 3.141592654f
+    NSLog(@"%f", piFloat); // imprime => 3.141592654
+    NSLog(@"%5.2f", piFloat); // imprime => " 3.14"
+    
+    NSNumber *piDoubleNumber = @3.1415926535;
+    double piDouble          = [piDoubleNumber doubleValue]; // o 3.1415926535
+    NSLog(@"%f", piDouble);
+    NSLog(@"%4.2f", piDouble); // imprime => "3.14"
+
+    // NSDecimalNumber es una clase de punto-fijo que es más preciso que float o double    
+    NSDecimalNumber *oneDecNum = [NSDecimalNumber decimalNumberWithString:@"10.99"];
+    NSDecimalNumber *twoDecNum = [NSDecimalNumber decimalNumberWithString:@"5.002"];
+    // NSDecimalNumber no tiene la capacidad de utilizar los operadores estándares 
+    // +, -, * , /, por lo que cuenta con sus propios operadores:    
+    [oneDecNum decimalNumberByAdding:twoDecNum]; 
+    [oneDecNum decimalNumberBySubtracting:twoDecNum];
+    [oneDecNum decimalNumberByMultiplyingBy:twoDecNum];
+    [oneDecNum decimalNumberByDividingBy:twoDecNum];
+    NSLog(@"%@", oneDecNum); // imprime => 10.99 como NSDecimalNumber es inmutable
+
+    // Literales BOOL
+    NSNumber *yesNumber = @YES;
+    NSNumber *noNumber  = @NO;
+    // o
+    BOOL yesBool = YES;
+    BOOL noBool  = NO;
+    NSLog(@"%i", yesBool); // prints => 1
+
+    // Objecto arreglo
+    // Puede contener diferentes tipos de datos, pero deben de ser un objeto de
+    // Objective-C    
+    NSArray *anArray      = @[@1, @2, @3, @4];
+    NSNumber *thirdNumber = anArray[2];
+    NSLog(@"Third number = %@", thirdNumber); // imprime => "Third number = 3"
+    // NSMutableArray es una versión mutable de NSArray, permitiendo el cambio
+    // de los elementos del arreglo y el agrandado o encojimiento del objeto arreglo.
+    // Conveniente, pero no tan eficiente como NSArray en cuanto a rendimiento. 
+    NSMutableArray *mutableArray = [NSMutableArray arrayWithCapacity:2];
+    [mutableArray addObject:@"Hello"];
+    [mutableArray addObject:@"World"];
+    [mutableArray removeObjectAtIndex:0];
+    NSLog(@"%@", [mutableArray objectAtIndex:0]); // imprime => "World"
+
+    // Objecto Diccionario
+    NSDictionary *aDictionary = @{ @"key1" : @"value1", @"key2" : @"value2" };
+    NSObject *valueObject     = aDictionary[@"A Key"];
+    NSLog(@"Object = %@", valueObject); // imprime => "Object = (null)"
+    // NSMutableDictionary también está disponible como un objeto mutable
+    NSMutableDictionary *mutableDictionary = [NSMutableDictionary dictionaryWithCapacity:2];
+    [mutableDictionary setObject:@"value1" forKey:@"key1"];
+    [mutableDictionary setObject:@"value2" forKey:@"key2"];
+    [mutableDictionary removeObjectForKey:@"key1"];
+
+    // Objeto de Set
+    NSSet *set = [NSSet setWithObjects:@"Hello", @"Hello", @"World", nil];
+    NSLog(@"%@", set); // imprime => {(Hello, World)} (el orden puede variar)
+    // NSMutableSet también está disponible como un objeto mutable
+    NSMutableSet *mutableSet = [NSMutableSet setWithCapacity:2];
+    [mutableSet addObject:@"Hello"];
+    [mutableSet addObject:@"Hello"];
+    NSLog(@"%@", mutableSet); // prints => {(Hello)}
+
+    ///////////////////////////////////////
+    // Operadores
+    ///////////////////////////////////////
+    
+    // Los operadores funcionan como en el lenguaje C
+    // Por ejemplo:
+    2 + 5; // => 7
+    4.2f + 5.1f; // => 9.3f
+    3 == 2; // => 0 (NO)
+    3 != 2; // => 1 (YES)
+    1 && 1; // => 1 (and lógico)
+    0 || 1; // => 1 (or lógico)
+    ~0x0F; // => 0xF0 (negación bitwise)
+    0x0F & 0xF0; // => 0x00 (AND bitwise)
+    0x01 << 1; // => 0x02 (acarreamiento a la izquierda bitwise (por 1))
+
+    ///////////////////////////////////////
+    // Estructuras de control
+    ///////////////////////////////////////
+
+    // Declaraciones If-Else
+    if (NO)
+    {
+        NSLog(@"I am never run");
+    } else if (0)
+    {
+        NSLog(@"I am also never run");
+    } else
+    {
+        NSLog(@"I print");
+    }
+
+    // Declaración Switch
+    switch (2)
+    {
+        case 0:
+        {
+            NSLog(@"I am never run");
+        } break;
+        case 1:
+        {
+            NSLog(@"I am also never run");
+        } break;
+        default:
+        {
+            NSLog(@"I print");
+        } break;
+    }
+    
+    // Declaración de ciclos While
+    int ii = 0;
+    while (ii < 4)
+    {
+        NSLog(@"%d,", ii++); // ii++ incrementa ii en la misma línea, luego de 
+                             // utilizar su valor
+    } // imprime => "0," 
+      //           "1,"
+      //           "2,"
+      //           "3,"
+
+    // Declaración de ciclos For
+    int jj;
+    for (jj=0; jj < 4; jj++)
+    {
+        NSLog(@"%d,", jj);
+    } // imprime => "0," 
+      //           "1,"
+      //           "2,"
+      //           "3,"
+     
+    // Declaraciones foreach
+    NSArray *values = @[@0, @1, @2, @3];
+    for (NSNumber *value in values)
+    {
+        NSLog(@"%@,", value);
+    } // imprime => "0," 
+      //           "1,"
+      //           "2,"
+      //           "3,"
+
+    // Objeto de ciclos For. Puede ser utilizado con cualquier tipo de objecto de 
+    // Objective-C
+    for (id item in values) { 
+        NSLog(@"%@,", item); 
+    } // imprime => "0," 
+      //           "1,"
+      //           "2,"
+      //           "3,"
+
+    // Declaraciones Try-Catch-Finally
+    @try
+    {
+        // Tus declaraciones aquí
+        @throw [NSException exceptionWithName:@"FileNotFoundException"
+                            reason:@"File Not Found on System" userInfo:nil];
+    } @catch (NSException * e) // utiliza: @catch (id exceptionName) para atrapar 
+                               // todos los objetos
+    {
+        NSLog(@"Exception: %@", e);
+    } @finally
+    {
+        NSLog(@"Finally. Time to clean up.");
+    } // imprime => "Exception: File Not Found on System"
+      //           "Finally. Time to clean up."
+
+    // Los objetos NSError son útiles para argumentos de función para los 
+    // errores de usuario.    
+    NSError *error = [NSError errorWithDomain:@"Invalid email." code:4 userInfo:nil];
+ 
+    ///////////////////////////////////////
+    // Objetos
+    ///////////////////////////////////////
+    
+    // Crea una instancia de objeto alocando memoria e inicializándola
+    // Un objeto no es completamente funcional hasta que ambos pasos hayan sido
+    // completados
+    MyClass *myObject = [[MyClass alloc] init];
+        
+    // El modelo de programación orientada a objetos de Objective-C es basada en
+    // el envío de mensajes a instancias de objetos
+    // En Objective-C no se llama a un método; se envía un mensaje    
+    [myObject instanceMethodWithParameter:@"Steve Jobs"];
+
+    // Limpiar la memoria que se utilizó en el programa    
+    [pool drain];
+
+    // Fin de @autoreleasepool
+    }
+    
+    // Fin del programa
+    return 0;
+}
+
+///////////////////////////////////////
+// Clases y funciones
+///////////////////////////////////////
+
+// Declara tu clase en archivo de encabezado (MyClass.h)
+// Sintaxis de declaración de clase:
+// @interface NombreDeClase : NombreDeClasePadre <ProtocolosImplementados>
+// {
+//    type nombre; <= declaraciones de variables;
+// }
+// @property tipo nombre; <= declaración de propiedades
+// -/+ (tipo) Declaración de método; <= Declaración de método
+// @end
+@interface MyClass : NSObject <MyProtocol> // NSObject es la clase de objeto 
+                                           // base de  Objective-C.
+{
+    // Declaraciones de variables de instancia (puede existir en el archivo de 
+    // interfaz o de implementación)    
+    int count; // Acceso protegido por defecto. 
+    @private id data; // Acceso privado (Más conveniente de declarar en el 
+                      // archivo de implementación)
+    NSString *name; 
+}
+// Notación conveneinte para acceso público de las variables para generar un 
+// método setter
+// Por defecto, el nombre del método setter 'set' seguido del nombre de 
+// variable @property
+@property int propInt; // Nombre del método 'setter' = 'setPropInt'
+@property (copy) id copyId; // (copy) => Copia el objeto durante la asignación
+// (readonly) => No se le puede asignar un valor fuera de @interface
+@property (readonly) NSString *roString; // utiliza @synthesize en 
+                                         // @implementation para crear un accesor
+// Puedes personalizar el nombre del getter y del setter en lugar de utilizar
+// el nombre por defecto "set".
+@property (getter=lengthGet, setter=lengthSet:) int length;
+ 
+// Métodos
++/- (return type)methodSignature:(Parameter Type *)parameterName;
+
+// + Para métodos de clase:
++ (NSString *)classMethod;
++ (MyClass *)myClassFromHeight:(NSNumber *)defaultHeight;
+
+// - Para métodos de instancia:
+- (NSString *)instanceMethodWithParameter:(NSString *)string;
+- (NSNumber *)methodAParameterAsString:(NSString*)string andAParameterAsNumber:(NSNumber *)number;
+
+// Métodos de constructor con argumentos
+- (id)initWithDistance:(int)defaultDistance;
+// Los nombres de los métodos de Objective-C son muy descriptivos. 
+// Siempre nombra los métodos de acuerdo con sus argumentos
+
+@end // Define el final de la interfaz
+
+
+// Para acceder a las variables públicas desde el archivo de implementación, 
+// @property genera un método setter automáticamente. El nombre del método 
+// es 'set' seguido de un nombre de variable @property:
+MyClass *myClass = [[MyClass alloc] init]; // Crea una instancia del objeto MyClass 
+[myClass setCount:10]; 
+NSLog(@"%d", [myClass count]); // imprime => 10
+// O utilizando los métodos getter y setter personalizados en @interface:
+[myClass lengthSet:32];
+NSLog(@"%i", [myClass lengthGet]); // imprime => 32
+// Por conveniencia, puedes utilizar la notación de punto para asignar y 
+// acceder a las variables de una instancia de objeto.
+myClass.count = 45;
+NSLog(@"%i", myClass.count); // imprime => 45
+
+// Llama a métodos de clase:
+NSString *classMethodString = [MyClass classMethod];
+MyClass *classFromName = [MyClass myClassFromName:@"Hello"];
+
+// Llama a métodos de instancia:
+MyClass *myClass = [[MyClass alloc] init]; // Crea una instancia de objeto Myclass
+NSString *stringFromInstanceMethod = [myClass instanceMethodWithParameter:@"Hello"];
+
+// Selectors
+// Una forma dinámica de representar métodos. Utilizados para llamar métodos 
+// de una clase, pasar métodos a través de funciones para avisar a otras clases 
+// para que lo llamen, y para guardar métodos como una variable.
+// SEL es el tipo de dato. @selector() devuelve un selector del nombre de 
+// método proveído methodAparameterAsString:andAParameterAsNumber: es un nombre 
+// para un método en MyClass
+SEL selectorVar = @selector(methodAParameterAsString:andAParameterAsNumber:); 
+if ([myClass respondsToSelector:selectorVar]) { // Revisa si la clase contiene el método
+    // Debe de poner todos los argumentos de método en un solo objeto para mandar una 
+    // función performSelector.    
+    NSArray *arguments = [NSArray arrayWithObjects:@"Hello", @4, nil];
+    [myClass performSelector:selectorVar withObject:arguments]; // Calls the method
+} else {
+    // NSStringFromSelector() devuelve un NSString del nombre de método de un selector dado
+    NSLog(@"MyClass does not have method: %@", NSStringFromSelector(selectedVar));
+}
+
+// Implementa los métodos de un archivo de implementación (MyClass.m):
+@implementation MyClass {
+    long distance; // Variable de instancia de acceso privado
+    NSNumber height;
+}
+
+// Para acceder a una variable pública del archivo de interfaz, utiliza '_' seguido del
+// nombre de la variable:
+_count = 5; // Hace referencia a "int count" de la interfaz de MyClass
+// Accede variables definidas en el archivo de implementación:
+distance = 18; // Hace referencia a "long distance" de la implementación de MyClass
+// Para utilizar una variable @property en el archivo de implementación, utiliza 
+// @synthesize para crear una variable de acceso:
+@synthesize roString = _roString; // _roString ahora está disponible en @implementation
+
+// Lamado antes de llamar algún método o instanciar cualquier objeto
++ (void)initialize 
+{
+    if (self == [MyClass class]) {
+        distance = 0;
+    }
+}
+
+// Contraparte para inicializar un método. Llamado cuando el contador de referencias
+// del objeto es cero
+- (void)dealloc
+{
+    [height release]; // Si no utilizas ARC, asegúrate de liberar las variables de 
+                      // objeto de las clases
+    [super dealloc];  // y llama el método dealloc de la clase padre
+}
+
+// Los constructores son una manera de crear instancias de una clase
+// Este es el constructor por defecto que es llamado cuando el objeto es inicializado.
+- (id)init
+{
+    if ((self = [super init])) // 'super' es utilizado para acceder a los 
+                               // métodos de la clase padre.
+    {
+        self.count = 1; // 'self' es utilizado para que el objeto se llame a sí mismo.
+    }
+    return self;
+}
+// Se pueden crear constructores que contiene argumentos
+- (id)initWithDistance:(int)defaultDistance 
+{
+    distance = defaultDistance;
+    return self;
+}
+
++ (NSString *)classMethod
+{
+    return @"Some string";
+}
+
++ (MyClass *)myClassFromHeight:(NSNumber *)defaultHeight 
+{
+    height = defaultHeight;
+    return [[self alloc] init];
+}
+
+- (NSString *)instanceMethodWithParameter:(NSString *)string
+{
+    return @"New string";
+}
+
+- (NSNumber *)methodAParameterAsString:(NSString*)string andAParameterAsNumber:(NSNumber *)number
+{
+    return @42;
+}
+
+// Objective-C no tiene declaraciones de métodos privados, pero pueden ser simulados.
+// Para simular un método privado, crea un método en @implementation pero no en @interface.
+- (NSNumber *)secretPrivateMethod {
+    return @72;
+}
+[self secretPrivateMethod]; // Calls private method
+
+// Métodos declarados dentro de MyProtocol
+- (void)myProtocolMethod
+{
+    // statements
+}
+
+@end // Declara el final de la implementación
+
+///////////////////////////////////////
+// Categorías
+///////////////////////////////////////
+// Una categoría es un grupo de métodos diseñados para extender una clase. 
+// Te permiten agregar nuevos métodos a una clase existente por propósitos 
+// de organización. Éstos no deben de serconfundidos con subclases. 
+// Las subclases existen para CAMBIAR la funcionalidad de un objeto mientras 
+// que las categoríasle AGREGAN funcionalidad de un objeto.
+// Las categorías te permiten:
+// -- Agregar métodos a una clase existente por propósitos de oganización.
+// -- Extender clases de objetos de Objective-C (ejemplo: NSString) para 
+//    agregar tus propios métodos.
+// -- Agregar la habilidad de crear métodos protegidos y privados para las clases.
+// NOTA: No sobreescribas los métodos de las clases base en una categoría 
+// aunque tengas la habilidad de poder hacerlo. Sobreescribir métodos puede 
+// causar errores en la compilación después entre diferentes categorías y 
+// puede arruinar el propósito de las categorías de solo AGREGAR funcionalidad. 
+// Utiliza subclass para sobreescribir métodos.
+
+// Aquí una clase base simple, Car.
+@interface Car : NSObject
+
+@property NSString *make;
+@property NSString *color;
+
+- (void)turnOn;
+- (void)accelerate;
+
+@end
+
+// Y la implementación de la clase simple, Car
+#import "Car.h"
+
+@implementation Car
+
+@synthesize make = _make;
+@synthesize color = _color;
+
+- (void)turnOn {
+    NSLog(@"Car is on.");
+}
+- (void)accelerate {
+    NSLog(@"Accelerating.");
+}
+
+@end
+
+// Ahora, si quisieramos crear un objeto Truck (Camión), crearíamos una 
+// subclase de Car (Carro) como si le cambiaramos de funcionalidad de Car 
+// para que se comporte como un camión. Pero digamos que únicamente queremos 
+// agregar funcionalidad al Car (Carro) existente. Un buen ejemplo sería 
+// limpiar el carro. Así que crearíamos una cateog®iea para agregar los 
+// métodos de limpieza: 
+// Archivo @interface: Car+Clean.h (NombreBaseDeClase+NombreDeCategoria.h)
+#import "Car.h" // Asegúrate de improtar la clase que deseas extener.
+
+@interface Car (Clean) // El nombre de la categoría está dentro de (), 
+                       // seguido del nombre de la clase base
+
+- (void)washWindows; // Nombres de los nuevos métodos que le agregamos 
+                     // a nuestro objeto Car
+- (void)wax;
+
+@end
+
+// Archivo @implementation: Car+Clean.m (NombreBaseDeClase+NombreDeCategoria.m)
+#import "Car+Clean.h" // Importa el archivo de @interface de la categoría Clean
+
+@implementation Car (Clean)
+
+- (void)washWindows {
+    NSLog(@"Windows washed.");
+}
+- (void)wax {
+    NSLog(@"Waxed.");
+}
+
+@end 
+
+// Cualquier instancia del objeto Car tiene la habilidad de utilizar una 
+// categoría. Todo lo que necesitan es importarlo: 
+#import "Car+Clean.h" // Importa todas las diferentes categorías que 
+                      // necesites utilizar
+#import "Car.h" // También debes de importar la clase base para su 
+                // funcionalidad original 
+
+int main (int argc, const char * argv[]) {
+    @autoreleasepool {
+        Car *mustang = [[Car alloc] init];
+        mustang.color = @"Red";
+        mustang.make = @"Ford";
+
+        [mustang turnOn]; // Utiliza métodos de la clase base Car.
+        [mustang washWindows]; // Utiliza métodos de la categoría Clean de Car.
+    }
+    return 0; 
+}
+
+// Objective-C no tiene declaraciones para métodos protegidos, pero los puedes
+// simular. Crea una categoría conteniendo todos los métodos protegidos, 
+// luego importa ÚNICAMENTE al archivo @implementation de una clase que 
+// pertenece a la clase Car.
+@interface Car (Protected) // Nombrando la categoría 'Protected' para 
+                           // recordar que los métodos están protegidos
+    
+- (void)lockCar; // Los métodos enlistados aquí solo puedens ser creados 
+                 // por objetos Car
+
+@end
+// Para utilizar los métodos protegidos, importa la categoría, 
+// luego implementa sus métodos:
+#import "Car+Protected.h" // Recuerda, importa únicamente el archivo 
+                          // de @implementation
+
+@implementation Car 
+
+- (void)lockCar {
+    NSLog(@"Car locked."); // Las instancias de Car no puede utilizar 
+                           // lockCar porque no se encuentra en @interface
+}
+
+@end
+
+///////////////////////////////////////
+// Extensiones
+///////////////////////////////////////
+// Las Extensions te permiten sobreescribir atributos de propiedades de 
+// acceso público y métodos de un @interface
+// Archivo @interface: Shape.h
+@interface Shape : NSObject 
+
+@property (readonly) NSNumber *numOfSides;
+
+- (int)getNumOfSides;
+
+@end
+// Puedes sobreescribir la variable numOfSides o el métodos getNumOfSlides 
+// para modificarlos con una extensión:
+// Archivo @implementation: Shape.m
+#import "Shape.h"
+// Las extensiones se encuentran en el mismo archivo que el archivo 
+// de @implementation
+@interface Shape () // () después del nombre de la clase base declara 
+                    // una extensión
+
+@property (copy) NSNumber *numOfSides; // Hacer numOfSlides copy en lugar
+                                       // de readonly.
+-(NSNumber)getNumOfSides; // Hacer que getNumOfSides devuelva un NSNumber 
+                          // en lugar de un int.
+-(void)privateMethod; // También puedes crear una nuevos métodos privados 
+                      // dentro de las extensiones
+
+@end
+// @implementation principal:
+@implementation Shape 
+
+@synthesize numOfSides = _numOfSides;
+
+-(NSNumber)getNumOfSides { // Todas las declaraciones dentro de extensions 
+                           // deben de ser dentro de @implementation
+    return _numOfSides;
+}
+-(void)privateMethod {
+    NSLog(@"Private method created by extension. Shape instances cannot call me.");
+}
+
+@end
+
+///////////////////////////////////////
+// Protocolos
+///////////////////////////////////////
+// Un protocolo declara métodos que pueden ser implementados por cualquier otra
+// clase. Los protocolos no son clases. Simplementen define una interfaz que 
+// otros objetos deben de implementar.
+// Archivo @protocol: "CarUtilities.h"
+@protocol CarUtilities <NSObject> // <NSObject> => Nombre de otro protocolo 
+                                  // que se incluye en éste
+    @property BOOL engineOn; // La clase que lo adopta debe de utilizar 
+                            // @synthesize para todas las @properties definidas 
+    - (void)turnOnEngine; // y todos los métodos definidos
+@end
+// A continuación una clase ejemplo que implementa el protcolo
+#import "CarUtilities.h" // Importar el archivo @protocol.
+
+@interface Car : NSObject <CarUtilities> // El nombre del protocolo dentro de <>
+    // No necesitas los nombres de @property o métodos aquí para CarUtilities.
+    // Estos solo es requerido por @implementation.
+- (void)turnOnEngineWithUtilities:(id <CarUtilities>)car; // También Puedes 
+                                                          // utilizar protocolos 
+                                                          // como datos.
+@end
+// El @implementation necesita que se implementen @properties y métodos 
+// del protocolo.
+@implementation Car : NSObject <CarUtilities>
+
+@synthesize engineOn = _engineOn; // Crear una declaración @synthesize para el 
+                                  // @property engineOn.
+
+- (void)turnOnEngine { // Implementa turnOnEngine como quieras. Los 
+                       // protocolos no definen
+    _engineOn = YES;   // cómo implementas un método, con tal de que lo implementes.
+}
+// Puedes utilizar un protocolo como data mientras sepas quee métodos y variables 
+// tiene implementado.
+- (void)turnOnEngineWithCarUtilities:(id <CarUtilities>)objectOfSomeKind { 
+    [objectOfSomeKind engineOn]; // Tienes acceso a las variables 
+    [objectOfSomeKind turnOnEngine]; // y los métodos del objeto
+    [objectOfSomeKind engineOn]; // Puede o no puede ser YES. La clase lo 
+                                 // implementa como se quiera.
+}
+
+@end
+// Las instancias de Car ahora tienen acceso al protocolo.
+Car *carInstance = [[Car alloc] init];
+[carInstance setEngineOn:NO];
+[carInstance turnOnEngine];
+if ([carInstance engineOn]) {
+    NSLog(@"Car engine is on."); // imprime => "Car engine is on."
+}
+// Asegúrate de revisar si un objeto de tipo 'id' implementa un protocolo antes
+// de llamar a sus métodos:
+if ([myClass conformsToProtocol:@protocol(CarUtilities)]) {
+    NSLog(@"This does not run as the MyClass class does not implement the CarUtilities protocol.");
+} else if ([carInstance conformsToProtocol:@protocol(CarUtilities)]) {
+    NSLog(@"This does run as the Car class implements the CarUtilities protocol.");
+}
+// Las categorías también pueden implementar protcolos: @interface Car 
+// (CarCategory) <CarUtilities>
+// Puedes implementar varios protocolos: 
+// @interface Car : NSObject <CarUtilities, CarCleaning>
+// NOTA: Si dos o más protocolos dependen entre sí, asegúrate de declararlos 
+// de manera adelantada:
+#import "Brother.h"
+
+@protocol Brother; // Declaración adelantada. Sin ésto, el compilador 
+                   // tira un error.
+
+@protocol Sister <NSObject>
+
+- (void)beNiceToBrother:(id <Brother>)brother;
+
+@end
+
+// Ver si el problema es que Sister depende de Brother, 
+// y Brother dependa de Sister.
+#import "Sister.h"
+
+@protocol Sister; // Estas líneas detienen la recursión, resolviendo el problema.
+
+@protocol Brother <NSObject>
+ 
+- (void)beNiceToSister:(id <Sister>)sister;
+
+@end
+
+
+///////////////////////////////////////
+// Bloques
+///////////////////////////////////////
+// Los bloques son declaraciones de código, tal como una función, pueden 
+// ser utilizados como data.
+// A continuación un bloque simple con un argumento entero que devuelve 
+// un el argumento más 4.
+int (^addUp)(int n); // Declarar una variable para almacenar el bloque.
+void (^noParameterBlockVar)(void); // Ejemplo de una declaración de variable 
+                                   // de bloque sin argumentos.
+// Los bloques tienen acceso a variables del mismo ámbito. Pero las variables 
+// son solo readonly y el valor pasado al bloque es el valor de la variable 
+// cuando el bloque es creado.
+int outsideVar = 17; // Si modificamos outsideVar después de declarar addUp,
+                     // outsideVar AÚN es 17.
+__block long mutableVar = 3; // __block hace que las variables se puedan 
+                             // escribir en bloques.
+addUp = ^(int n) { // Remueve (int n) para tener un bloque que no recibe 
+                   // ningún parámetro
+    NSLog(@"You may have as many lines in a block as you would like.");
+    NSSet *blockSet; // También puedes declarar variables locales.
+    mutableVar = 32; // Asignar un nuevo valor a la variable __block.
+    return n + outsideVar; // Declaraciones de retorno son opcionales.
+}
+int addUp = add(10 + 16); // Llama al bloque de código con argumentos.
+// Los bloques son usualmente utilizados como argumentos a funciones que 
+// son llamados más adelante o para callbacks.
+@implementation BlockExample : NSObject 
+ 
+ - (void)runBlock:(void (^)(NSString))block {
+    NSLog(@"Block argument returns nothing and takes in a NSString object.");
+    block(@"Argument given to block to execute."); // Calling block.
+ }
+
+ @end
+
+
+///////////////////////////////////////
+// Manejo de memoria
+///////////////////////////////////////
+/* 
+Para cada objeto utilizado en una aplicación, la memoria debe de ser alocada 
+para ese objeto. Cuando la aplicación termina de utilizar ese objeto, la 
+memoria debe de ser desalocada para asegurar la  eficiencia de la aplicación.
+Objetive-C no utiliza garbage collection, y en lugar de eso utiliza conteos 
+de referencias. Mientras haya al menos una referencia del objeto (también 
+conocido como tener un objeto de adueñado), entonces el objeto estará 
+disponible para su uso.
+
+Cuando una instancia es dueña un objeto, su contador de referencia incrementa
+por uno. Cuando el objeto es liberado, el contador de referencia decrementa uno. 
+Cuando el conteo de referencia es cero, el objeto es removido de la memoria.
+
+Con todas las interacciones de los objetos, sigue el patrón de:
+(1) Crear e lobjeto, (2) utiliza el objeto, (3) libera el objeto de la memoria.
+*/
+
+MyClass *classVar = [MyClass alloc]; // 'alloc' asigna uno al conteo de 
+                                     // referencias de classVar. Devuelve un 
+                                     // puntero al objeto
+[classVar release]; // Decrementa el conteo de referencias de classVar's
+// 'retain'
+// 'retain' adueña la instancia de objeto existente e incrementa el conteo de 
+// referencia por uno. Devuelve un puntero al objeto.
+MyClass *newVar = [classVar retain]; // Si classVar es liberado, el objeto 
+                                     // aún se queda en memoria porque newVar
+                                     // es el dueño.
+[classVar autorelease]; // Remueve el adueñamiento de un objeto al final del 
+                        // bloque @autoreleasepool. Devuelve un puntero al objeto.
+
+// @property puede utilizar 'retain' y 'assign' también para pequeñas 
+// definiciones convenientes
+@property (retain) MyClass *instance; // Libera el valor viejo y retiene 
+                                      // uno nuevo (referencia fuerte)
+@property (assign) NSSet *set; // Apunta a un nuevo valor sin retener/liberar 
+                               // una referencia vieja (débil)
+
+// Conteo Automático de Referencias (ARC)
+// Debido a que el manejo de memoria puede ser un dolor, en Xcode 4.2 y iOS 4 
+// se introdujo el Conteo Automático de Referencias (ARC).
+// ARC es una funcionalidad del compilador que agrega retain, release y
+// autorealase automáticamente, así que al
+// utilizar ARC, no se debe de utilizar retain, release o autorelease.
+MyClass *arcMyClass = [[MyClass alloc] init]; 
+// ... código utilizando arcMyClass
+// Sin ARC, necesitarás llamar: [arcMyClass release] luego de terminar de 
+// utilizar arcMyClass. Pero con ARC, no hay necesidad. Insertará 
+// automáticamente la declaración de liberación.
+
+// Mientras que para los atributos de @property 'assign' y 'retain', con ARC 
+// utilizarás 'weak' y 'strong'
+@property (weak) MyClass *weakVar; // 'weak' no adueña el objeto. El conteo de 
+                                   // referencias de la instancia original
+// es fijado a ceor, weakVar automáticamente recibe el valor de  nil para 
+// evitar cualquier 'crashing'.
+@property (strong) MyClass *strongVar; // 'strong' se adueña del objeto. 
+                                       // Asegura que el objeto se quede en memoria.
+
+// Para variables regulares (no variables de @property), utiliza lo siguiente:
+__strong NSString *strongString; // Por defecto. La variables de retenida en 
+                                 // memoria hasta que se salga del ámbito.
+__weak NSSet *weakSet; // Referencia débil a un objeto existente. Cuando el 
+                       // objeto existente es liberado, weakSet le es asginado
+                       // un valor nil
+__unsafe_unretained NSArray *unsafeArray; // Como __weak, pero unsafeArray no 
+                                          // es asginado a nil cuando el objeto
+                                          // existente es liberado.
+
+```
+## Lecturas sugeridas
+
+[Wikipedia Objective-C](http://es.wikipedia.org/wiki/Objective-C)
+
+[Programming with Objective-C. Libro PDF de Apple](https://developer.apple.com/library/ios/documentation/cocoa/conceptual/ProgrammingWithObjectiveC/ProgrammingWithObjectiveC.pdf)
+
+[iOS For High School Students: Getting Started](http://www.raywenderlich.com/5600/ios-for-high-school-students-getting-started)
diff --git a/es-es/python-es.html.markdown b/es-es/python-es.html.markdown
index 4930eebc..a27203d1 100644
--- a/es-es/python-es.html.markdown
+++ b/es-es/python-es.html.markdown
@@ -9,8 +9,8 @@ lang: es-es
 filename: learnpython-es.py
 ---
 
-Python fue creado por Guido Van Rossum en el principio de los 90'. Ahora es uno
-de los lenguajes más populares en existencia. Me enamoré de Python por su claridad sintáctica.
+Python fue creado por Guido Van Rossum en el principio de los 90. Ahora es uno
+de los lenguajes más populares que existen. Me enamoré de Python por su claridad sintáctica.
 Es básicamente pseudocódigo ejecutable.
 
 ¡Comentarios serán muy apreciados! Pueden contactarme en [@louiedinh](http://twitter.com/louiedinh) o louiedinh [at] [servicio de email de google]
@@ -19,8 +19,8 @@ Nota: Este artículo aplica a Python 2.7 específicamente, pero debería ser apl
 
 ```python
 # Comentarios de una línea comienzan con una almohadilla (o signo gato)
-""" Strings multilinea pueden escribirse
-    usando tres "'s, y comunmente son usados
+""" Strings multilínea pueden escribirse
+    usando tres "'s, y comúnmente son usados
     como comentarios.
 """
 
@@ -48,7 +48,7 @@ Nota: Este artículo aplica a Python 2.7 específicamente, pero debería ser apl
 
 # Resultado de la división de enteros truncada para positivos y negativos
 5 // 3     # => 1
-5.0 // 3.0 # => 1.0 # funciona con números en coma flotante
+5.0 // 3.0 # => 1.0 # funciona con números de coma flotante
 -5 // 3  # => -2
 -5.0 // 3.0 # => -2.0
 
@@ -436,7 +436,7 @@ class Humano(object):
     def get_especie(cls):
         return cls.especie
 
-    # Un metodo estatico es llamado sin la clase o instancia como referencia
+    # Un metodo estático es llamado sin la clase o instancia como referencia
     @staticmethod
     def roncar():
         return "*roncar*"
@@ -507,7 +507,7 @@ def duplicar_numeros(iterable):
 # Nota: xrange es un generador que hace lo mismo que range.
 # Crear una lista de 1 a 900000000 lleva mucho tiempo y ocupa mucho espacio.
 # xrange crea un generador, mientras que range crea toda la lista.
-# Añadimos un guion bajo a los nombres de variable que coinciden con palabras 
+# Añadimos un guión bajo a los nombres de variable que coinciden con palabras
 # reservadas de python.
 xrange_ = xrange(1, 900000000)
 
diff --git a/es-es/r-es.html.markdown b/es-es/r-es.html.markdown
new file mode 100644
index 00000000..2b710b27
--- /dev/null
+++ b/es-es/r-es.html.markdown
@@ -0,0 +1,717 @@
+---
+language: R
+contributors:
+    - ["e99n09", "http://github.com/e99n09"]
+    - ["isomorphismes", "http://twitter.com/isomorphisms"]
+translators:
+    - ["David Hsieh", "http://github.com/deivuh"]
+lang: es-es    
+filename: learnr-es.r
+---
+
+R es un lenguaje de computación estadística. Tiene muchas librerías para cargar
+y limpiar sets de datos, ejecutar procedimientos estadísticos y generar
+gráficas. También puedes ejecutar comandos `R` dentro de un documento de
+LaTeX.
+
+```r
+
+# Los comentariso inician con símbolos numéricos.
+
+# No puedes hacer comentarios de múltiples líneas
+# pero puedes agrupar múltiples comentarios de esta manera. 
+
+# En Windows puedes utilizar CTRL-ENTER para ejecutar una línea.
+# En Mac utilizas COMMAND-ENTER
+
+
+#############################################################################
+# Cosas que puedes hacer sin entender nada acerca de programación
+#############################################################################
+
+# En esta sección, mostramos algunas cosas chileras / cool que puedes hacer en
+# R sin entender nada de programación. No te preocupes en entender nada 
+# de lo que hace este código. Solo disfruta!
+
+data()	        # Examinar sets de datos pre-cargados
+data(rivers)	# Obtiene este: Lengths of Major North American Rivers"
+ls()	        # Fijarse que "rivers" ahora aparece en el workspace
+head(rivers)	# Echarle un ojo al set de datos
+# 735 320 325 392 524 450
+
+length(rivers)	# ¿Cuántos ríos fueron medidos?
+# 141
+summary(rivers) # ¿Cuáles son algunas estadísticas generales?
+#   Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
+#  135.0   310.0   425.0   591.2   680.0  3710.0
+
+# Generar una gráfica tallo-y-hoja (Visualización de datos tipo histograma)
+stem(rivers)
+
+# El punto decimal son 2 dígitos a la derecha de | 
+#
+#   0 | 4
+#   2 | 011223334555566667778888899900001111223333344455555666688888999
+#   4 | 111222333445566779001233344567
+#   6 | 000112233578012234468
+#   8 | 045790018
+#  10 | 04507
+#  12 | 1471
+#  14 | 56
+#  16 | 7
+#  18 | 9
+#  20 |
+#  22 | 25
+#  24 | 3
+#  26 |
+#  28 |
+#  30 |
+#  32 |
+#  34 |
+#  36 | 1
+
+stem(log(rivers)) # Fijarse que la data no es normal ni log-normal!
+# Toma eso, fundamentalistas de la curva de campana!
+
+# El punto decimal está a 1 dígito a la izquierda del |
+#
+#  48 | 1
+#  50 |
+#  52 | 15578
+#  54 | 44571222466689
+#  56 | 023334677000124455789
+#  58 | 00122366666999933445777
+#  60 | 122445567800133459
+#  62 | 112666799035
+#  64 | 00011334581257889
+#  66 | 003683579
+#  68 | 0019156
+#  70 | 079357
+#  72 | 89
+#  74 | 84
+#  76 | 56
+#  78 | 4
+#  80 |
+#  82 | 2
+
+# Generar un histograma:
+hist(rivers, col="#333333", border="white", breaks=25) # Juega con los estos parámetros
+hist(log(rivers), col="#333333", border="white", breaks=25) # Generarás más gráficas después
+
+# Aquí hay otro set de datos pre-cargado. R tiene bastantes de éstos.
+data(discoveries)
+plot(discoveries, col="#333333", lwd=3, xlab="Year",
+     main="Number of important discoveries per year")
+plot(discoveries, col="#333333", lwd=3, type = "h", xlab="Year",
+     main="Number of important discoveries per year")
+
+# En lugar de dejar el orden por defecto (por año),
+# podemos ordenar de tal manera que muestre qué es típico:
+sort(discoveries)
+#  [1]  0  0  0  0  0  0  0  0  0  1  1  1  1  1  1  1  1  1  1  1  1  2  2  2  2
+# [26]  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  3  3  3
+# [51]  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  4  4  4  4  4  4  4  4
+# [76]  4  4  4  4  5  5  5  5  5  5  5  6  6  6  6  6  6  7  7  7  7  8  9 10 12
+
+stem(discoveries, scale=2)
+#
+#  El punto decimal se encuentra en |
+#
+#   0 | 000000000
+#   1 | 000000000000
+#   2 | 00000000000000000000000000
+#   3 | 00000000000000000000
+#   4 | 000000000000
+#   5 | 0000000
+#   6 | 000000
+#   7 | 0000
+#   8 | 0
+#   9 | 0
+#  10 | 0
+#  11 |
+#  12 | 0
+
+max(discoveries)
+# 12
+summary(discoveries)
+#   Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
+#    0.0     2.0     3.0     3.1     4.0    12.0
+
+# Tirar los dados varias veces
+round(runif(7, min=.5, max=6.5))
+# 1 4 6 1 4 6 4
+# Tus números será diferente de los míos, a menos que tengamos el mismo valor 
+# de random.seed(31337)
+
+# Dibuja de un Gaussian 9 veces
+rnorm(9)
+# [1]  0.07528471  1.03499859  1.34809556 -0.82356087  0.61638975 -1.88757271
+# [7] -0.59975593  0.57629164  1.08455362
+
+
+
+##################################################
+# Tipos de datos y aritmética básica
+##################################################
+
+# Ahora para la parte de programación orientada a objetos del tutorial.
+# En esta sección conocerás los tipos de datos importantes de R:
+# Enteros, numéricos, caracteres, lógicos, y factores.
+# Hay otros, pero esos son los que menos necesitas para empezar.
+
+# ENTEROS
+# Enteros de almacenamiento largo son escritos con L
+5L # 5
+class(5L) # "integer"
+# (Try ?class para más información en la función class().)
+# En R, cada valor único, como 5L, es considerado un vector de logitud 1
+length(5L) # 1
+# También puedes tener un vector de enteros con longitud > 1:
+c(4L, 5L, 8L, 3L) # 4 5 8 3
+length(c(4L, 5L, 8L, 3L)) # 4
+class(c(4L, 5L, 8L, 3L)) # "integer"
+
+# NUMÉRICOS
+# Un "numérico" es un número de punto flotante de doble precisión.
+5 # 5
+class(5) # "numeric"
+# Nuevamente, todo en R es un vector;
+# puedes hacer un vector numérico con más de un elemento
+c(3,3,3,2,2,1) # 3 3 3 2 2 1
+# También puedes utilizar el notación científica
+5e4 # 50000
+6.02e23 # Número de Avogadro
+1.6e-35 # Logintud Planck 
+# También puedes tener números infinitamente grandes o pequeños
+class(Inf)	# "numeric"
+class(-Inf)	# "numeric"
+# Puede que uses "Inf", por ejemplo, en integrate(dnorm, 3, Inf);
+# esto obvia las tablas de puntos Z.
+
+# ARITMÉTICA BÁSICA
+# Puedes hacer aritmética con números
+# Haciendo aritmética en un mix de enteros y numéricos, te da otro numérico
+10L + 66L # 76      # entero mas entero da entero
+53.2 - 4  # 49.2    # entero menos entero da numérico
+2.0 * 2L  # 4       # numérico veces entero da numérico
+3L / 4    # 0.75    # entero sobre numérico da numérico
+3 %% 2	  # 1       # el residuo de dos numéricos es otro numérico
+# La aritmética ilegal rinde un "not-a-number"
+0 / 0 # NaN
+class(NaN) # "numeric"
+# Puedes hacer aritmética con dos vectores con longitud mayor a 1,
+# siempre que la longitud del vector mayor es un entero múltiplo del menor.
+c(1,2,3) + c(1,2,3) # 2 4 6
+
+# CARACTERES
+# No hay diferencia entre strings y caracteres en R
+"Horatio" # "Horatio"
+class("Horatio") # "character"
+class('H') # "character"
+# Ambos eran vectores de caracteres de longitud 1
+# Aquí hay uno más largo:
+c('alef', 'bet', 'gimmel', 'dalet', 'he')
+# =>
+# "alef"   "bet"    "gimmel" "dalet"  "he"
+length(c("Call","me","Ishmael")) # 3
+# Puedes hacer operaciones regex en vectores de caracteres:
+substr("Fortuna multis dat nimis, nulli satis.", 9, 15) # "multis "
+gsub('u', 'ø', "Fortuna multis dat nimis, nulli satis.") # "Fortøna møltis dat nimis, nølli satis."
+# R tiene varios vectores predefinidos de caracteres 
+letters
+# =>
+#  [1] "a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" "n" "o" "p" "q" "r" "s"
+# [20] "t" "u" "v" "w" "x" "y" "z"
+month.abb # "Jan" "Feb" "Mar" "Apr" "May" "Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec"
+
+# LÓGICOS
+# En R, un "logical" es un boolean
+class(TRUE)	# "logical"
+class(FALSE)	# "logical"
+# Ese comportamiento es normal
+TRUE == TRUE	# TRUE
+TRUE == FALSE	# FALSE
+FALSE != FALSE	# FALSE
+FALSE != TRUE	# TRUE
+# El dato faltante (NA) es lógico también
+class(NA)	# "logical"
+# Utiliza | y & para operaciones lógicas
+# OR
+TRUE | FALSE	# TRUE
+# AND
+TRUE & FALSE	# FALSE
+# Puedes probar si x es TRUE (verdadero)
+isTRUE(TRUE)	# TRUE
+# Aquí tenemos un vector lógico con varios elementos:
+c('Z', 'o', 'r', 'r', 'o') == "Zorro" # FALSE FALSE FALSE FALSE FALSE
+c('Z', 'o', 'r', 'r', 'o') == "Z" # TRUE FALSE FALSE FALSE FALSE
+
+# FACTORES
+# La clase factor es para datos de categoría
+# Los factores pueden ser ordenados (como las calificaciones de los niños) 
+# o sin orden (como el género)
+factor(c("female", "female", "male", NA, "female"))
+#  female female male   <NA>   female
+# Levels: female male
+# Los "levels" son los valores que los datos categóricos pueden tener
+# Tomar nota que los datos faltantes no entran a los niveles
+levels(factor(c("male", "male", "female", NA, "female"))) # "female" "male"
+# Si un vector de factores tiene longitud 1, sus niveles también tendrán
+# una longitud de 1 también
+
+length(factor("male")) # 1
+length(levels(factor("male"))) # 1
+# Los factores son comúnmente vistos en marcos de dato, y una estructura de 
+# datos que cubriremos después
+data(infert) # "Infertility after Spontaneous and Induced Abortion"
+levels(infert$education) # "0-5yrs"  "6-11yrs" "12+ yrs"
+
+# NULL
+# "NULL" es uno raro; utilízalo para "limpiar" un vector
+class(NULL)	# NULL
+parakeet = c("beak", "feathers", "wings", "eyes")
+parakeet
+# =>
+# [1] "beak"     "feathers" "wings"    "eyes"
+parakeet <- NULL
+parakeet
+# =>
+# NULL
+
+# COERCIÓN DE TIPO
+# La coerción de tipos es cuando forzas un valor diferente tipo al que puede tomar.
+as.character(c(6, 8)) # "6" "8"
+as.logical(c(1,0,1,1)) # TRUE FALSE  TRUE  TRUE
+# Si pones elementos de diferentes tipos en un vector, coerciones raras pasan:
+c(TRUE, 4) # 1 4
+c("dog", TRUE, 4) # "dog"  "TRUE" "4"
+as.numeric("Bilbo")
+# =>
+# [1] NA
+# Warning message:
+# NAs introduced by coercion
+
+# También tomar nota: Esos solo eran datos de tipos básicos
+# Hay mucho más tipos de datos, como las fechas, series de tiempo, etc.
+
+
+##################################################
+# Variables, ciclos, condiciones (if/else)
+##################################################
+
+# A variable is like a box you store a value in for later use.
+# We call this "assigning" the value to the variable.
+# Having variables lets us write loops, functions, and if/else statements
+
+# VARIABLES
+# Muchas maneras de asignar valores:
+x = 5 # esto es posible
+y <- "1" # esto es preferido
+TRUE -> z # estos funciona pero es raro
+
+# CICLOS
+# Tenemos ciclos 'for'
+for (i in 1:4) {
+  print(i)
+}
+# Tenemos ciclos 'while'
+a <- 10
+while (a > 4) {
+	cat(a, "...", sep = "")
+	a <- a - 1
+}
+# Ten en mente que los ciclos 'for' y 'while' son lentos en R
+# Operaciones con vectores enteros (i.e. una fila o columna completa)
+# o tipos de función apply() (que discutiremos después) son preferidos
+
+# CONDICIONES (IF/ELSE)
+# De nuevo, bastante normal
+if (4 > 3) {
+	print("4 is greater than 3")
+} else {
+	print("4 is not greater than 3")
+}
+# =>
+# [1] "4 is greater than 3"
+
+# FUNCIONES
+# Definidos de la siguiente manera:
+jiggle <- function(x) {
+	x = x + rnorm(1, sd=.1)	#agregar un poco de ruido (controlado)
+	return(x)
+}
+# Llamados como cualquier otra función de R
+jiggle(5)	# 5±ε. luego de set.seed(2716057), jiggle(5)==5.005043
+
+
+
+###########################################################################
+# Estructura de datos: Vectores, matrices, marcos da datos y arreglos
+###########################################################################
+
+# UNIDIMENSIONAL
+
+# Empecemos desde el principio, y con algo que ya conoces: vectores.
+vec <- c(8, 9, 10, 11)
+vec	#  8  9 10 11
+# Preguntamos por elementos específicos poniendo un subconjunto en corchetes
+# (Toma nota de que R empieza los conteos desde 1)
+vec[1]		# 8
+letters[18]	# "r"
+LETTERS[13]	# "M"
+month.name[9]	# "September"
+c(6, 8, 7, 5, 3, 0, 9)[3]	# 7
+# También podes buscar por los índices de componentes específicos,
+which(vec %% 2 == 0)	# 1 3
+# obtener la primera o las últimas entradas de un vector,
+head(vec, 1)	# 8
+tail(vec, 2)	# 10 11
+# o averiguar si cierto valor se encuentra dentro de un vector
+any(vec == 10) # TRUE
+# Si un índice "se pasa", obtendrás un NA:
+vec[6]	# NA
+# Puedes encontrar la longitud de un vector con length()
+length(vec)	# 4
+# Puedes realizar operaciones con vectores enteros o con subconjuntos de vectores
+vec * 4	# 16 20 24 28
+vec[2:3] * 5	# 25 30
+any(vec[2:3] == 8) # FALSE
+# y R tiene muchas funciones pre-definidas para resumir vectores
+mean(vec)	# 9.5
+var(vec)	# 1.666667
+sd(vec)		# 1.290994
+max(vec)	# 11
+min(vec)	# 8
+sum(vec)	# 38
+# Otras funciones pre-definidas:
+5:15	# 5  6  7  8  9 10 11 12 13 14 15
+seq(from=0, to=31337, by=1337)
+# =>
+#  [1]     0  1337  2674  4011  5348  6685  8022  9359 10696 12033 13370 14707
+# [13] 16044 17381 18718 20055 21392 22729 24066 25403 26740 28077 29414 30751
+
+# BIDIMENCIONAL (TODO EN UNA CLASE)
+
+# Puedes hacer una matriz de las entradas todos de un mismo tipo como:
+mat <- matrix(nrow = 3, ncol = 2, c(1,2,3,4,5,6))
+mat
+# =>
+#      [,1] [,2]
+# [1,]    1    4
+# [2,]    2    5
+# [3,]    3    6
+# A diferencia de un vector, una clase matriz es una 'matriz', 
+# sin importar qué contiene
+class(mat) # => "matrix"
+# Consulta la primera fila
+mat[1,]	# 1 4
+# Realiza una operación en la primera columna
+3 * mat[,1]	# 3 6 9
+# Consulta por una celda específica
+mat[3,2]	# 6
+
+# Transpone una matriz entera
+t(mat)
+# =>
+#      [,1] [,2] [,3]
+# [1,]    1    2    3
+# [2,]    4    5    6
+
+# Multiplicación de matrices
+mat %*% t(mat)
+# =>
+#      [,1] [,2] [,3]
+# [1,]   17   22   27
+# [2,]   22   29   36
+# [3,]   27   36   45
+
+# cbind() une vectores como columnas para hacer una matriz
+mat2 <- cbind(1:4, c("dog", "cat", "bird", "dog"))
+mat2
+# =>
+#      [,1] [,2]
+# [1,] "1"  "dog"
+# [2,] "2"  "cat"
+# [3,] "3"  "bird"
+# [4,] "4"  "dog"
+class(mat2)	# matrix
+# De nuevo, ten en cuenta lo que sucedió
+# Debido a que las matrices deben de contener todas las entradas del mismo tipo,
+# todo fue convertido a la clase caracter
+c(class(mat2[,1]), class(mat2[,2]))
+
+# rbind() une vectores como filas para hacer una matriz
+mat3 <- rbind(c(1,2,4,5), c(6,7,0,4))
+mat3
+# =>
+#      [,1] [,2] [,3] [,4]
+# [1,]    1    2    4    5
+# [2,]    6    7    0    4
+# Ah, todo es de la misma clase. No hay coerciones. Mucho mejor.
+
+# BIDIMENSIONAL (DIFERENTES CLASES)
+
+# Para columnas de tipos diferentes, utiliza un data frame
+# Esta estructura de datos es muy útil para programación estadística,
+# una versión de ésta fue agregada a Python en el paquete "pandas".
+
+students <- data.frame(c("Cedric","Fred","George","Cho","Draco","Ginny"),
+                       c(3,2,2,1,0,-1),
+                       c("H", "G", "G", "R", "S", "G"))
+names(students) <- c("name", "year", "house") # name the columns
+class(students)	# "data.frame"
+students
+# =>
+#     name year house
+# 1 Cedric    3     H
+# 2   Fred    2     G
+# 3 George    2     G
+# 4    Cho    1     R
+# 5  Draco    0     S
+# 6  Ginny   -1     G
+class(students$year)	# "numeric"
+class(students[,3])	# "factor"
+# encontrar las dimensiones
+nrow(students)	# 6
+ncol(students)	# 3
+dim(students)	# 6 3
+# La función data.frame() convierte vectores de caracteres en vectores 
+# de factores por defecto; deshabilita este atributo
+# stringsAsFactors = FALSE cuando vayas a crear el data.frame
+?data.frame
+
+# Hay otras formas de hacer subconjuntos de data frames
+students$year	# 3  2  2  1  0 -1
+students[,2]	# 3  2  2  1  0 -1
+students[,"year"]	# 3  2  2  1  0 -1
+
+# Una versión aumentada de la estructura data.frame es el data.table
+# Si estás trabajando huge o panel data, o necesitas unificar algunos 
+# subconjuntos de datos, data.table puede ser una buena elección.
+# Aquí un tour:
+install.packages("data.table") # Descarga el paquete de CRAN
+require(data.table) # Cárgalo
+students <- as.data.table(students)
+students # Tomar en cuenta la diferencia de la impresión
+# =>
+#      name year house
+# 1: Cedric    3     H
+# 2:   Fred    2     G
+# 3: George    2     G
+# 4:    Cho    1     R
+# 5:  Draco    0     S
+# 6:  Ginny   -1     G
+students[name=="Ginny"] # obtener filas con name == "Ginny"
+# =>
+#     name year house
+# 1: Ginny   -1     G
+students[year==2] # obtener filas con year == 2
+# =>
+#      name year house
+# 1:   Fred    2     G
+# 2: George    2     G
+# data.table hace que la unificación de dos sets de datos sea fácil
+# Hagamos otro data.table para unifiar a los estudiantes
+founders <- data.table(house=c("G","H","R","S"),
+                       founder=c("Godric","Helga","Rowena","Salazar"))
+founders
+# =>
+#    house founder
+# 1:     G  Godric
+# 2:     H   Helga
+# 3:     R  Rowena
+# 4:     S Salazar
+setkey(students, house)
+setkey(founders, house)
+students <- founders[students] # Unifica los dos sets de datos comparando "house"
+setnames(students, c("house","houseFounderName","studentName","year"))
+students[,order(c("name","year","house","houseFounderName")), with=F]
+# =>
+#    studentName year house houseFounderName
+# 1:        Fred    2     G           Godric
+# 2:      George    2     G           Godric
+# 3:       Ginny   -1     G           Godric
+# 4:      Cedric    3     H            Helga
+# 5:         Cho    1     R           Rowena
+# 6:       Draco    0     S          Salazar
+
+# data.table hace que sea fácil obtener resúmenes de las tablas
+students[,sum(year),by=house]
+# =>
+#    house V1
+# 1:     G  3
+# 2:     H  3
+# 3:     R  1
+# 4:     S  0
+
+# Para eliminar una columna de un data.frame o data.table, 
+# asignarle el valor NULL.
+students$houseFounderName <- NULL
+students
+# =>
+#    studentName year house
+# 1:        Fred    2     G
+# 2:      George    2     G
+# 3:       Ginny   -1     G
+# 4:      Cedric    3     H
+# 5:         Cho    1     R
+# 6:       Draco    0     S
+
+# Elimina una fila poniendo un subconjunto
+# Usando data.table:
+students[studentName != "Draco"]
+# =>
+#    house studentName year
+# 1:     G        Fred    2
+# 2:     G      George    2
+# 3:     G       Ginny   -1
+# 4:     H      Cedric    3
+# 5:     R         Cho    1
+# Usando data.frame:
+students <- as.data.frame(students)
+students[students$house != "G",]
+# =>
+#   house houseFounderName studentName year
+# 4     H            Helga      Cedric    3
+# 5     R           Rowena         Cho    1
+# 6     S          Salazar       Draco    0
+
+# MULTI-DIMENSIONAL (TODOS LOS ELEMENTOS DE UN TIPO)
+
+# Arreglos crean una tabla de dimensión n
+# Todos los elementos deben de ser del mismo tipo
+# Puedes hacer una tabla bi-dimensional (como una matriz)
+array(c(c(1,2,4,5),c(8,9,3,6)), dim=c(2,4))
+# =>
+#      [,1] [,2] [,3] [,4]
+# [1,]    1    4    8    3
+# [2,]    2    5    9    6
+# Puedes utilizar un arreglo para hacer una matriz tri-dimensional también
+array(c(c(c(2,300,4),c(8,9,0)),c(c(5,60,0),c(66,7,847))), dim=c(3,2,2))
+# =>
+# , , 1
+#
+#      [,1] [,2]
+# [1,]    2    8
+# [2,]  300    9
+# [3,]    4    0
+#
+# , , 2
+#
+#      [,1] [,2]
+# [1,]    5   66
+# [2,]   60    7
+# [3,]    0  847
+
+# LISTAS (MULTI-DIMENSIONAL, POSIBLEMENTE DESIGUALES, DE DIFERENTES TIPOS)
+
+# Finalmente, R tiene listas (de vectores)
+list1 <- list(time = 1:40)
+list1$price = c(rnorm(40,.5*list1$time,4)) # aleatorio
+list1
+# Puedes obtener elementos de una lista de la siguiente manera
+list1$time # Una manera
+list1[["time"]] # Otra manera
+list1[[1]] # Y otra manera
+# =>
+#  [1]  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
+# [34] 34 35 36 37 38 39 40
+# Puedes crear una lista de subconjuntos como cualquier otro vector
+list1$price[4]
+
+# Las listas no son la estructura de datos más eficiente para trabajar en R;
+# a menos de que tengas una buena razón, deberías de quedarte con data.frames
+# Las listas son usualmente devueltas por funciones que realizan regresiones 
+# lineales
+
+##################################################
+# La familia de funciones apply()
+##################################################
+
+# Te recuerdas de mat?
+mat
+# =>
+#      [,1] [,2]
+# [1,]    1    4
+# [2,]    2    5
+# [3,]    3    6
+# Utiliza apply(X, MARGIN, FUN) paraaplicar una función FUN a la matriz X
+# sobre las filas (MAR = 1) o las columnas (MAR = 2)
+# Eso es, R aplica FUN sobre cada fila (o columna) de X, mucho más rápido que
+# lo que haría un ciclo 'for' o 'loop'
+apply(mat, MAR = 2, jiggle)
+# =>
+#      [,1] [,2]
+# [1,]    3   15
+# [2,]    7   19
+# [3,]   11   23
+# Otras funciones: ?lapply, ?sapply
+
+# No te sientas muy intimidado; todos están de acuerdo que son confusas
+
+# El paquete plyr busca reemplazar (y mejorar) la familiar *apply()
+install.packages("plyr")
+require(plyr)
+?plyr
+
+
+
+#########################
+# Carga de datos
+#########################
+
+# "pets.csv" es un archivo en internet
+# (pero puede ser tan fácil como tener el archivo en tu computadora)
+pets <- read.csv("http://learnxinyminutes.com/docs/pets.csv")
+pets
+head(pets, 2) # primeras dos filas
+tail(pets, 1) # última fila
+
+# Para guardar un data frame o una matriz como un archivo .csv
+write.csv(pets, "pets2.csv") # para hacer un nuevo archivo .csv
+# definir el directorio de trabajo con setwd(), búscalo con getwd()
+
+# Prueba ?read.csv ?write.csv para más información
+
+
+#########################
+# Gráficas
+#########################
+
+# FUNCIONES PREDEFINIDAS DE GRAFICACIÓN
+# Gráficos de dispersión!
+plot(list1$time, list1$price, main = "fake data")
+# Regresiones!
+linearModel <- lm(price  ~ time, data = list1)
+linearModel # Muestra el resultado de la regresión
+# Grafica la línea de regresión
+abline(linearModel, col = "red")
+# Obtiene una veridad de diagnósticos
+plot(linearModel)
+# Histogramas!
+hist(rpois(n = 10000, lambda = 5), col = "thistle")
+# Barras!
+barplot(c(1,4,5,1,2), names.arg = c("red","blue","purple","green","yellow"))
+
+# GGPLOT2
+# Pero éstas no son las gráficas más bonitas de R
+# Prueba el paquete ggplot2 para mayor variedad y mejores gráficas
+install.packages("ggplot2")
+require(ggplot2)
+?ggplot2
+pp <- ggplot(students, aes(x=house))
+pp + geom_histogram()
+ll <- as.data.table(list1)
+pp <- ggplot(ll, aes(x=time,price))
+pp + geom_point()
+# ggplot2 tiene una excelente documentación 
+# (disponible en http://docs.ggplot2.org/current/)
+
+
+
+```
+
+## ¿Cómo obtengo R?
+
+* Obtén R y R GUI de [http://www.r-project.org/](http://www.r-project.org/)
+* [RStudio](http://www.rstudio.com/ide/) es otro GUI
diff --git a/es-es/rust-es.html.markdown b/es-es/rust-es.html.markdown
new file mode 100644
index 00000000..b43cb815
--- /dev/null
+++ b/es-es/rust-es.html.markdown
@@ -0,0 +1,324 @@
+---
+language: rust
+contributors:
+    - ["P1start", "http://p1start.github.io/"]
+translators:
+    - ["Razican", "https://www.razican.com/"]
+filename: learnrust-es.rs
+lang: es-es
+---
+
+Rust es un lenguaje de programación desarrollado por Mozzilla Research. Rust
+combina el control del rendimiento a bajo nivel con la comodidad del alto nivel
+y garantías de seguridad.
+
+Consigue cumplir estos objetivos sin necesidad de un recolector de basura o
+runtime, haciendo posible usar las librerías de Rust como sustituto de C.
+
+La primera versión de Rust, la 0.1, fue lanzada en enero de 2012, y durante 3
+años el desarrollo fue tan rápido que hasta hace poco el uso de las versiones
+estables no era recomendable, y se aconsejaba usar las compilaciones nocturnas.
+
+El 15 de mayo de 2015 se lanzó Rust 1.0, con una garantía completa de
+retrocompatibilidad. A día de hoy los tiempos de compilación han mejorado mucho
+desde ese lanzamiento, así como otros aspectos del lenguaje y el compilador.
+Rust ha adoptado un modelo de desarrollo por series de publicaciones periódicas,
+con lanzamientos cada 6 semanas. Junto con cada lanzamiento, se lanza la beta de
+la siguiente versión.
+
+A pesar de que Rust es un lenguaje relativamente de bajo nivel, tiene conceptos
+funcionales que generalmente se encuentran en lenguajes de más alto nivel. Esto
+hace que Rust sea rápido y al mismo tiempo fácil y eficiente a la hora de
+programar.
+
+```rust
+// Esto es un comentario. Los comentarios de una sola línea se hacen así...
+/* ...y los de múltiples líneas así */
+
+//////////////////////////
+// 1. Conceptos básicos //
+//////////////////////////
+
+// Funciones
+// `i32` es el tipo para enteros de 32 bits con signo
+fn suma2(x: i32, y: i32) -> i32 {
+    // Retorno implícito (sin punto y coma)
+    x + y
+}
+
+// Función principal
+fn main() {
+    // N;umeros //
+
+    // Bindings (variables) inmutables
+    let x: i32 = 1;
+
+    // Sufijos para enteros / floats
+    let y: i32 = 13i32;
+    let f: f64 = 1.3f64;
+
+    // Inferencia de tipos
+    // La mayor parte del tiempo, el compilador de Rust puede inferir el tipo de
+    // una variable, por lo que no necesitas escribir una anotación de tipo
+    // explícita. A lo largo de este tutorial, los tipos están anotados
+    // explícitamente en varios sitios, pero solo con propósito demostrativo. La
+    // inferencia de tipos puede manejar esto por ti la mayor parte del tiempo.
+    let x_implicita = 1;
+    let f_implicita = 1.3;
+
+    // Aritmética
+    let sum = x + y + 13;
+
+    // Variable mutable
+    let mut mutable = 1;
+    mutable = 4;
+    mutable += 2;
+
+    // Strings (cadenas de caracteres) //
+
+    // Strings literales
+    let x: &str = "hola mundo!";
+
+    // Impresión por consola
+    println!("{} {}", f, x); // 1.3 hola mundo!
+
+    // Un `String` – una cadena en memoria dinámica (heap)
+    let s: String = "hola mundo".to_string();
+
+    // Una porión de cadena (slice) – una vista inmutable a otra cadena
+    // Esto es básicamente un puntero inmutable a un string string – en realidad
+    // no contiene los caracteres de la cadena, solo un puntero a algo que los
+    // tiene (en este caso, `s`)
+    let s_slice: &str = &s;
+
+    println!("{} {}", s, s_slice); // hola mundo hola mundo
+
+    // Vectores/arrays //
+
+    // A fixed-size array
+    let cuatro_enteros: [i32; 4] = [1, 2, 3, 4];
+
+    // Un array dinámico (vector)
+    let mut vector: Vec<i32> = vec![1, 2, 3, 4];
+    vector.push(5);
+
+    // Una porción (slice) – una vista inmutable a un vector o array
+    // Esto es parecido a un slice de un string, pero para vectores
+    let slice: &[i32] = &vector;
+
+    // Usa `{:?}` para imprimir algo en estilo debug
+    println!("{:?} {:?}", vector, slice); // [1, 2, 3, 4, 5] [1, 2, 3, 4, 5]
+
+    // Tuplas //
+
+    // Una tupla es un conjunto de tamaño fijo de valores. Pueden ser de diferente tipo.
+    let x: (i32, &str, f64) = (1, "hola", 3.4);
+
+    // Desestructurando `let`
+    let (a, b, c) = x;
+    println!("{} {} {}", a, b, c); // 1 hola 3.4
+
+    // Indexando
+    println!("{}", x.1); // hola
+
+    //////////////
+    // 2. Tipos //
+    //////////////
+
+    // Estructuras
+    struct Punto {
+        x: i32,
+        y: i32,
+    }
+
+    let origen: Punto = Punto { x: 0, y: 0 };
+
+    // Una estructura con campos sin nombre, una ‘estructura de tupla’
+    struct Punto2(i32, i32);
+
+    let origen2 = Punto2(0, 0);
+
+    // Enums básicos como en C
+    enum Direccion {
+        Izquierda,
+        Derecha,
+        Arriba,
+        Abajo,
+    }
+
+    let arriba = Direccion::Arriba;
+
+    // Enum con campos
+    enum OpcionalI32 {
+        UnI32(i32),
+        Nada,
+    }
+
+    let dos: OpcionalI32 = OpcionalI32::UnI32(2);
+    let nada = OpcionalI32::Nada;
+
+    // Genéricos //
+
+    struct Foo<T> { bar: T }
+
+    // Esto está definido en la librería estándar como `Option`
+    enum Opcional<T> {
+        AlgunVal(T),
+        SinVal,
+    }
+
+    // Métodos //
+
+    impl<T> Foo<T> {
+        // Los métodos reciben un parámetro explícito `self`
+        fn get_bar(self) -> T {
+            self.bar
+        }
+    }
+
+    let un_foo = Foo { bar: 1 };
+    println!("{}", un_foo.get_bar()); // 1
+
+    // Traits (conocidos como interfaces o typeclasses en otros lenguajes) //
+
+    trait Frobnicate<T> {
+        fn frobnicate(self) -> Option<T>;
+    }
+
+    impl<T> Frobnicate<T> for Foo<T> {
+        fn frobnicate(self) -> Option<T> {
+            Some(self.bar)
+        }
+    }
+
+    let otro_foo = Foo { bar: 1 };
+    println!("{:?}", otro_foo.frobnicate()); // Some(1)
+
+    /////////////////////////////////
+    // 3. Comparación con patrones //
+    /////////////////////////////////
+
+    let foo = OpcionalI32::UnI32(1);
+    match foo {
+        OpcionalI32::UnI32(n) => println!("es un i32: {}", n),
+        OpcionalI32::Nada  => println!("no es nada!"),
+    }
+
+    // comparación de patrones avanzada
+    struct FooBar { x: i32, y: OpcionalI32 }
+    let bar = FooBar { x: 15, y: OpcionalI32::UnI32(32) };
+
+    match bar {
+        FooBar { x: 0, y: OpcionalI32::UnI32(0) } =>
+            println!("Los números son cero!"),
+        FooBar { x: n, y: OpcionalI32::UnI32(m) } if n == m =>
+            println!("Los números son iguales"),
+        FooBar { x: n, y: OpcionalI32::UnI32(m) } =>
+            println!("Números diferentes: {} {}", n, m),
+        FooBar { x: _, y: OpcionalI32::Nada } =>
+            println!("El segudo número no es nada!"),
+    }
+
+    /////////////////////////
+    // 4. Flujo de control //
+    /////////////////////////
+
+    // bucles `for`
+    let array = [1, 2, 3];
+    for i in array.iter() {
+        println!("{}", i);
+    }
+
+    // Rangos
+    for i in 0u32..10 {
+        print!("{} ", i);
+    }
+    println!("");
+    // imprime `0 1 2 3 4 5 6 7 8 9 `
+
+    // `if`
+    if 1 == 1 {
+        println!("Las matemáticas funcionan!");
+    } else {
+        println!("Oh no...");
+    }
+
+    // `if` como una expresión
+    let valor = if true {
+        "bueno"
+    } else {
+        "malo"
+    };
+
+    // bucle `while`
+    while 1 == 1 {
+        println!("El universo está funcionando correctamente.");
+    }
+
+    // Bucle infinito
+    loop {
+        println!("Hola!");
+    }
+
+    ////////////////////////////////////////
+    // 5. Seguridad de memoria y punteros //
+    ////////////////////////////////////////
+
+    // Posesión de punteros – solo uno puede ‘poseer’ un puntero en cada momento
+    // Esto significa que cuando la `Box` queda fuera del ámbito, puede ser
+    // liberada automáticamente de manera segura.
+    let mut mio: Box<i32> = Box::new(3);
+    *mio = 5; // dereferenciar
+    // Aquí, `ahora_es_mio`, toma posesión de `mio`. En otras palabras, `mio` se
+    // mueve.
+    let mut ahora_es_mio = mio;
+    *ahora_es_mio += 2;
+
+    println!("{}", ahora_es_mio); // 7
+    // println!("{}", mio); // esto no compilaría, porque `now_its_mine` es el
+    // que posee el puntero
+
+    // Referencia – un puntero inmutable que referencia a otro dato
+    // Cuando se crea una referencia a un valor, decimos que el valor ha sido
+    // ‘tomado prestado’.
+    // Mientras un valor está prestado como inmutable, no puede ser modificado o
+    // movido.
+    // Una prestación dura hasta el fin del ámbito en el que se creó.
+    let mut var = 4;
+    var = 3;
+    let ref_var: &i32 = &var;
+
+    println!("{}", var); // A diferencia de `mio`, `var` se puede seguir usando
+    println!("{}", *ref_var);
+    // var = 5; // esto no compilaría, porque `var` está prestada
+    // *ref_var = 6; // esto tampoco, porque `ref_var` es una referencia
+    // inmutable
+
+    // Referencia mutable
+    // Mientras que un valor está prestado como mutable, no puede ser accedido
+    // desde ningún otro sitio.
+    let mut var2 = 4;
+    let ref_var2: &mut i32 = &mut var2;
+    *ref_var2 += 2; // '*' se usa para apuntar al var2 prestado como mutable
+
+    println!("{}", *ref_var2); // 6 , //var2 no compilaría. //ref_var2 es de
+                               // tipo &mut i32, por lo que guarda una
+                               // referencia a un i32 no el valor.
+    // var2 = 2; // esto no compilaría porque `var2` está prestado
+}
+```
+
+## Lectura adicional
+
+Rust es mucho más que esto. Esto es solo lo más básico para que puedas entender
+las cosas más importantes. Para aprender más sobre Rust, lee [The Rust
+Programming Language](http://doc.rust-lang.org/book/index.html) y echa un
+vistazo al subreddit [/r/rust](http://reddit.com/r/rust). Los compañeros en el
+canal #rust en irc.mozilla.org también son muy buenos con los recien llegados.
+También puedes acceder a [Rust users](https://users.rust-lang.org/) a pedir
+ayuda o a [Rust internals](https://internals.rust-lang.org/) para aprender más
+sobre el lenguaje y colaborar en su desarrollo.
+
+También puedes probar Rust con un compilador online en el oficial [Rust
+playpen](http://play.rust-lang.org) o en la [web principal de
+Rust](http://rust-lang.org).
diff --git a/es-es/yaml-es.html.markdown b/es-es/yaml-es.html.markdown
index a5157b5d..cd3143fb 100644
--- a/es-es/yaml-es.html.markdown
+++ b/es-es/yaml-es.html.markdown
@@ -4,6 +4,7 @@ lang: es-es
 filename: learnyaml-es.yaml
 contributors:
   - ["Adam Brenecki", "https://github.com/adambrenecki"]
+  - ["Everardo Medina","https://github.com/everblut"]
 translators:
   - ["Daniel Zendejas","https://github.com/DanielZendejas"]
 ---
@@ -14,7 +15,7 @@ leído y escrito por humanos.
 
 Basa su funcionalidad en JSON, con la adición de líneas nuevas
 e indentación inspirada en Python. A diferencia de Python, YAML
-no permite tabs literales.
+no permite tabulaciones literales.
 
 ```yaml
 # Los comentarios en YAML se ven así.
@@ -38,97 +39,177 @@ llave con espacios: valor
 llave: "Un string, entre comillas."
 "Las llaves tambien pueden estar entre comillas.": "valor entre comillas"
 
-# Los strings de líneas múltiples pueden ser escritos 
+# Los strings de líneas múltiples pueden ser escritos
 # como un 'bloque literal' (usando pipes |)
 # o como un 'bloque doblado' (usando >)
 
 bloque_literal: |
 	Este bloque completo de texto será preservado como el valor de la llave
 	'bloque_literal', incluyendo los saltos de línea.
-	
-	Se continúa guardando la literal hasta que se cese la indentación. 
+
+	Se continúa guardando la literal hasta que se cese la indentación.
 		Cualquier línea que tenga más indentación, mantendrá los espacios dados
 		(por ejemplo, estas líneas se guardarán con cuatro espacios)
 
-nloque_doblado: >
+bloque_doblado: >
 	De la misma forma que el valor de 'bloque_literal', todas estas
 	líneas se guardarán como una sola literal, pero en esta ocasión todos los
 	saltos de línea serán reemplazados por espacio.
 
-	Las líneas en blanco, como la anterior, son convertidos a un salto de línea.
+	Las líneas en blanco, como la anterior, son convertidas a un salto de línea.
 
         Las líneas con mayor indentación guardan sus saltos de línea.
         Esta literal ocuparán dos líneas.
 
-########################
-# TIPOS DE COLECCIONES #
-########################
-
-# La indentación se usa para anidar.
+# La indentación se usa para anidar elementos
 un_mapa_indentado:
     llave: valor
     otra_llave: otro valor
     otro_mapa_indentado:
         llave_interna: valor_interno
 
-# Las llaves de los mapas no deben ser strings necesariamente
+# Las llaves de los mapas no requieren ser strings necesariamente
 0.25: una llave numérica
 
-# Las llaves también pueden ser objetos de multi línea, usando ? para indicar
-# el inicio de una llave
+# Las llaves también pueden ser objetos de multiples líneas,
+# usando ? para indicar el inicio de una llave
 ? |
     Esto es una llave
     que tiene múltiples líneas
 : y este es su valor
 
-# YAML tambien permite colecciones como llaves, pero muchos lenguajes de 
+########################
+# TIPOS DE COLECCIONES #
+########################
+
+# Las colecciones en YAML usan la indentación para delimitar el alcance
+# y cada elemento de la colección inicia en su propia línea.
+# YAML tambien permite colecciones como llaves, pero muchos lenguajes de
 # programación se quejarán.
 
 # Las secuencias (equivalentes a listas o arreglos) se ven así:
-una_secuencia:
-    - Item 1
-    - Item 2
-    - 0.5 # las secuencias pueden tener distintos tipos en su contenido.
-    - Item 4
-    - llave: valor
-      otra_llave: otro_valor
+- Amarillo
+- Verde
+- Azul
+
+# Se puede usar una secuencia como valor para una llave.
+secuencia:
+    - Elemento 1
+    - Elemento 2
+    - Elemento 3
+    - Elemento 4
+
+# Las secuencias pueden contener secuencias como elementos.
+- [Uno, Dos, Tres]
+- [Domingo, Lunes, Martes]
+- [Luna, Marte, Tierra]
+
+# Las secuencias pueden tener distintos tipos en su contenido.
+secuencia_combinada:
+    - texto
+    - 5
+    - 0.6
+    - llave: valor # se convierte en un json dentro de la secuencia
     -
         - Esta es una secuencia
         - ...dentro de otra secuencia
 
-# Dado que todo JSON está incluído dentro de YAML, también puedes escribir 
-# mapas con la sintaxis de JSON y secuencias: 
-mapa_de_json: {"llave": "valor"}
-secuencia_de_json: [3, 2, 1, "despegue"]
+# Dado que todo JSON está incluído dentro de YAML, también puedes escribir
+# mapas con la sintaxis de JSON y secuencias:
+mapa_de_json_1: {"llave": "valor"}
+mapa_de_json_2:
+  llave: valor
+
+# Las secuencias tambien se pueden escribir como un arreglo al estilo JSON
+secuencia_de_json_1: [3, 2, 1, "despegue"]
+secuencia_de_json_2:
+  - 3
+  - 2
+  - 1
+  - "despegue"
+
+# YAML también soporta conjuntos usando el simbolo ?
+# y se ven de la siguiente forma:
+set:
+    ? item1
+    ? item2
+    ? item3
+
+# Se puede usar el tag !!set
+# Al igual que Python, los conjuntos sólo son mapas con valores nulos.
+# El ejemplo de arriba es equivalente a:
+set2:
+    item1: null
+    item2: null
+    item3: null
 
 ##################################
 # CARACTERÍSTICAS EXTRAS DE YAML #
 ##################################
 
+# YAML usa tres guiones (---) para diferenciar entre directivas
+# y contenido del documento.
+# Por otra parte, tres puntos (...) se utilizan para indicar
+# el final del documento en casos especiales.
+
 # YAML tiene funciones útiles llamadas 'anchors' (anclas), que te permiten
-# duplicar fácilmente contenido a lo largo de tu documento. En el ejemplo
-# a continuación, ambas llaves tendrán el mismo valor:
-contenido_anclado: &nombre_del_ancla Este string será el valor de las llaves
-otra_ancla: *nombre_del_ancla
-
-# YAML también tiene tags, que puedes usar para declarar tipos explícitamente.
-string_explícito: !!str 0.5
-# Algunos parseadores implementar tags específicas del lenguaje, como el 
+# duplicar fácilmente contenido a lo largo de tu documento.
+# El ampersand indica la declaración del ancla,
+declara_ancla: &texto texto de la llave
+# el asterisco indica el uso de dicha ancla.
+usa_ancla: *texto # tendrá el valor "texto de la llave"
+
+################
+# TAGS EN YAML #
+################
+
+# En YAML, los nodos que no tienen un tag obtienen su tipo
+# según la aplicación que los use, al usar un tag
+# se pueden declarar tipos explícitamente.
+string_explicito: !!str 0.5 # !!str para declarar un string
+integer_explicito: !!int 5 # !!int para declarar un integer
+float_explicito: !!float 1.2 # !!float para declarar un float
+conjunto_explicito: !!set # !!set para declarar un conjunto
+  ? Uno
+  ? Dos
+  ? Tres
+mapa_ordenado_explicito: !!omap # !!omap para declarar un mapa ordenado
+- Primero: 1
+- Segundo: 2
+- Tercero: 3
+- Cuarto: 4
+
+# Tags para los numeros enteros
+llave_canonica: 5222
+llave_decimal: +5222
+llave_octal: 010
+llave_hexadecimal: 0xC
+
+#Tags para los numeros flotantes
+llave_canonica: 1.215e+3
+llave_exponencial: 12.3555e+02
+llave_fija: 12.15
+llave_negativa_infinita: -.inf
+llave_numero_invalido: .NaN
+
+# Tags para las fechas y horas
+llave_canonica: 2001-12-15T02:59:43.1Z
+llave_iso8601: 2001-12-14t21:59:43.10-05:00
+llave_con_espacios: 2001-12-14 21:59:43.10 -5
+llave_fecha: 2002-12-14
+
+# Además existen tags para
+null: #valor nulo
+booleans: [ true, false ] # Valores booleanos
+string: '012345' # Valor en string
+
+
+# Algunos parseadores implementan tags específicas del lenguaje, como el
 # que se muestra a continuación, encargado de manejar números complejos en
 # Python:
 numero_complejo_python: !!python/complex 1+2j
 
-########################
-# TIPOS EXTRAS EN YAML #
-########################
-
-# Stirngs y números no son los únicos escalares que YAML puede entener.
-# YAML también puede parsear fechas en formato ISO .
-fechaHora: 2001-12-15T02:59:43.1Z
-fechaHora_con_espacios: 2001-12-14 21:59:43.10 -5
-fecha: 2002-12-14
-
-# La tag !!binary indica que un string es, en realidad, un blob
+# El tag !!binary indica que un string es en realidad un blob
 # representado en base-64.
 archivo_gif: !!binary |
     R0lGODlhDAAMAIQAAP//9/X17unp5WZmZgAAAOfn515eXvPz7Y6OjuDg4J+fn5
@@ -136,16 +217,10 @@ archivo_gif: !!binary |
     +f/++f/++f/++f/++f/++SH+Dk1hZGUgd2l0aCBHSU1QACwAAAAADAAMAAAFLC
     AgjoEwnuNAFOhpEMTRiggcz4BNJHrv/zCFcLiwMWYNG84BwwEeECcgggoBADs=
 
-# YAML también tiene un tipo set, que se ve de la siguiente forma:
-set:
-    ? item1
-    ? item2
-    ? item3
-
-# Al igual que Python, los sets sólo son mapas con valores nulos.
-# El ejemplo de arriba es equivalente a: 
-set2:
-    item1: null
-    item2: null
-    item3: null
 ```
+
+### Recursos adicionales
+
++ [Sitio oficial de YAML](http://yaml.org/)
++ [Parser en línea de de YAML](http://yaml-online-parser.appspot.com/)
++ [Validador en línea de YAML](http://codebeautify.org/yaml-validator)
diff --git a/fa-ir/css-fa.html.markdown b/fa-ir/css-fa.html.markdown
new file mode 100644
index 00000000..4e222eb2
--- /dev/null
+++ b/fa-ir/css-fa.html.markdown
@@ -0,0 +1,307 @@
+---
+language: css
+contributors:
+    - ["Mohammad Valipour", "https://github.com/mvalipour"]
+    - ["Marco Scannadinari", "https://github.com/marcoms"]
+    - ["Geoffrey Liu", "https://github.com/g-liu"]
+    - ["Connor Shea", "https://github.com/connorshea"]
+    - ["Deepanshu Utkarsh", "https://github.com/duci9y"]
+    - ["Tyler Mumford", "https://tylermumford.com"]
+translators:
+    - ["Arashk", "https://github.com/Arashk-A"]
+lang: fa-ir
+filename: learncss-fa.css
+---
+
+<p dir='rtl'>در روزهای آغازین وب هیچگونه عنصر بصری مشاهده نمیشد و محتوا به صورت متن خالی بود. </p>
+<p dir='rtl'>اما با توسعه بیشتر مرورگرها صفحات وب کاملاً تصویری نیز رایج شد</p>
+<p dir='rtl'>CSS زبان استانداردی که موجودیت آن برای حفظ جدایی بین محتوا (HTML) و نگاه و احساس از</p>
+<p dir='rtl'>صفحات وب است.</p>
+
+<p dir='rtl'>به طور خلاصه, کاری که CSS انجام میدهد ارائه نحوه ایست که شما را قادر به هدف قرار دادن</p>
+<p dir='rtl'>عناصر مختلف در یک صفحه HTML کرده و امکان اختصاص خواص متفاوت بصری به آنها را میدهد.</p>
+
+
+<p dir='rtl'>مانند هر زبانی, CSS نسخه های زیادی دارد که در اینجا توجه ما روی CSS2.0 است. با وجودی که این نسخه جدیدترین نسخه نمیباشد اما بیشترین پشتیبانی و سازگاری را در میان نسخه های مختلف را دارد</p>
+
+<p dir='rtl'><strong>توجه: </strong> برای مشاهده برخی از نتایج جلوه های تصویری CSS به منظور یادگیری بیشتر شما باید چیزهای گوناگونی در محیطی مثل [dabblet](http://dabblet.com/) امتحان کنید. توجه اصلی این مقاله روی دستورات و برخی از نکات عمومی است.</p>
+
+
+<p dir='rtl'>در CSS همه توضیحات داخل ستاره-بروم نوشته میشوند زیرا CSS دستوری برای توضیحات تک خطی مثل C ندارد</p>
+
+```CSS
+/* comments appear inside slash-asterisk, just like this line!
+   there are no "one-line comments"; this is the only comment style */
+```
+
+<p dir='rtl'>به طور کلی دستورات CSS بسیار ساده هستند که در آن یک انتخابگر (selector) عنصری را در  روی صفحه هدف قرار میدهد.</p>
+
+```CSS
+selector { property: value; /* more properties...*/ }
+```
+
+<p dir='rtl'>با استفاده از ستاره می توان برای همه عناصر روی صفحه استایل تعریف کرد</p>
+
+
+```CSS
+* { color:red; }
+```
+
+<p dir='rtl'>فرض کنید عنصری مثل این بر روی صفحه قرار دارد</p>
+
+```html
+<div class='some-class class2' id='someId' attr='value' otherAttr='en-us foo bar' />
+```
+<p dir='rtl'>شما میتوانید با استفاده از نام کلاس آنرا انتخاب کنید</p>
+
+
+```CSS
+.some-class { }
+```
+
+<p dir='rtl'>یا با استفاده از نام دو کلاس</p>
+
+```CSS
+.some-class.class2 { }
+```
+
+<p dir='rtl'>یا با استفاده از نام id</p>
+
+```CSS
+#someId { }
+```
+
+<p dir='rtl'>یا با استفاده از نام خود عنصر</p>
+
+```CSS
+div { }
+```
+
+<p dir='rtl'>یا با استفاده از `attr`</p>
+
+```CSS
+[attr] { font-size:smaller; }
+```
+
+<p dir='rtl'>یا با استفاده از ارزشی که برای `attr` مشخص شده</p>
+
+```CSS
+[attr='value'] { font-size:smaller; }
+```
+
+<p dir='rtl'>با استفاده از ارزشی که برای `attr` مشخص شده و آن ارزش با `val` شروع میشود در CSS3</p>
+
+```CSS
+[attr^='val'] { font-size:smaller; }
+```
+
+<p dir='rtl'>با استفاده از ارزشی که برای `attr` مشخص شده و آن ارزش با `ue` به پایان میرسد در CSS3</p>
+
+```CSS
+[attr$='ue'] { font-size:smaller; }
+```
+
+<p dir='rtl'>یا با انتخاب بوسیله یکی از ارزشهایی که در لیست `otherAttr` بوسیله فاصله از هم جدا شده اند در CSS3</p>
+
+```CSS
+[attr$='ue'] { font-size:smaller; }
+```
+
+<p dir='rtl'>یا ارزش(`value`) دقیقاً خود ارزش(`value`) یا بوسیله `-` که یونیکد (U+002D) از حرف بعدی جدا شود</p>
+
+```CSS
+[otherAttr|='en'] { font-size:smaller; }
+```
+
+<p dir='rtl'>و مهمتر از همه اینکه میتوان آنها را ترکیب کرد. نکته مهمی که در اینجا باید مد نظر داشته باشید این است که هنگام ترکیب نباید هیچگونه فاصله ای بین آنها قرار گیرد زیرا در این حالت معنای دستور تغییر میکند</p>
+
+```CSS
+div.some-class[attr$='ue'] { }
+```
+
+<p dir='rtl'>CSS این امکان را به شما میدهد که یک عنصر را بوسیله والدین آن انتخاب کنید</p>
+<p dir='rtl'>برای مثال دستور زیر همه عناصری را که نام کلاس آنها <span dir="ltr">`.class-name`</span> و دارای پدر و مادری با این مشخصه <span dir="ltr">`div.some-parent`</span> هستند را انتخاب میکند.</p>
+
+```CSS
+div.some-parent > .class-name {}
+```
+
+
+<p dir='rtl'>یا دستور زیر که همه عناصری را که نام کلاس آنها <span dir="ltr">`.class-name`</span> و داخل عنصری با مشخصه <span dir="ltr">`div.some-parent`</span> هستند را در هر عمقی که باشند (یعنی فرزندی از فرزندان <span dir="ltr">`div.some-parent`</span><span dir="ltr"> باشند) انتخاب میکند.</p>
+
+```CSS
+div.some-parent .class-name {}
+```
+
+<p dir='rtl'>نکته ای که در اینجا باید به آن توجه کنید این است که این رستور با فاصله ای بین نام دو کلاس همراه است و با مثال زیر که در بالا هم ذکر شد تفاوت دارد.</p>
+
+```CSS
+div.some-parent.class-name {}
+```
+
+<p dir='rtl'>دستور زیر همه عناصری را که نام کلاس آنها <span dir="ltr">`.this-element`</span> و بلافاصله بعد از عنصری با مشخصه <span dir="ltr">`.i-am-before`</span> قرار دارد را انتخاب میکند.</p>
+
+```CSS
+.i-am-before + .this-element { }
+```
+
+<p dir='rtl'>هر خواهر یا برادری که بعد از <span dir="ltr">`.i-am-before`</span> بیاید در اینجا لازم نیست بلافاصله بعد از هم قرار بگیرند ولی باید دارای پدر و مادری یکسان باشند.</p>
+
+```CSS
+.i-am-any-before ~ .this-element {}
+```
+<p dir='rtl'>در زیر چند نمونه از شبه کلاسها را معرفی میکنیم که به شما اجازه میدهد عناصر را بر اساس رفتار آنها در صفحه انتخاب کنید.</p>
+<p dir='rtl'>برای مثال زمانی که اشاره گر ماوس روی عنصری بر روی صفحه قرار دارد.</p>
+
+```CSS
+selector:hover {}
+```
+
+<p dir='rtl'>یا زمانی از یک لینک بازید کردید.</p>
+
+```CSS
+selected:visited {}
+```
+
+<p dir='rtl'>یا زمانی از لینکی بازید نشده است.</p>
+
+```CSS
+selected:link {}
+```
+
+<p dir='rtl'>یا زمانی که روی یک عنصر ورودی متمرکز شده.</p>
+
+```CSS
+selected:focus {}
+```
+
+<h3 dir='rtl'>واحدها</h3>
+
+```CSS
+selector {
+
+    /* واحدها اندازه */
+    width: 50%; /* در اساس درصد */
+    font-size: 2em; /* بر اساس اندازه font-size یعنی دو برابر اندازه فونت فعلی */
+    width: 200px; /* بر اساس پیکسل */
+    font-size: 20pt; /* بر اساس points (نکات) */
+    width: 5cm; /* بر اساس سانتیمتر */
+    min-width: 50mm; /* بر اساس میلیمتر */
+    max-width: 5in; /* بر اساس اینچ. max-(width|height) */
+    height: 0.2vh; /* بر اساس ارتفاع دید `vh = نسبت به 1٪ از ارتفاع دید` (CSS3) */
+    width: 0.4vw; /* بر اساس عرض دید `vw = نسبت به 1٪ از عرض دید` (CSS3) */
+    min-height: 0.1vmin; /* بر اساس کوچکترین مقدار از ارتفاع یا عرض دید (CSS3) */
+    max-width: 0.3vmax; /* مانند مثال بالا برای بیشترین مقدار (CSS3) */
+
+    /* رنگها */
+    background-color: #F6E;  /* بر اساس short hex */
+    background-color: #F262E2; /* بر اساس long hex format */
+    background-color: tomato; /* بر اساس نام رنگ */
+    background-color: rgb(255, 255, 255); /* بر اساس rgb */
+    background-color: rgb(10%, 20%, 50%); /* بر اساس درصد rgb , (rgb percent) */
+    background-color: rgba(255, 0, 0, 0.3); /* بر اساس rgba (نیمه شفاف) , (semi-transparent rgb) (CSS3) */
+    background-color: transparent; /* شفاف */
+    background-color: hsl(0, 100%, 50%); /* بر اساس hsl format (CSS3). */
+    background-color: hsla(0, 100%, 50%, 0.3); /* بر اساس hsla ,مثل RGBAکه میتوان شفافیت را در آخر انتخاب کرد (CSS3) */
+
+
+    /* عکسها */
+    background-image: url(/path-to-image/image.jpg); /* گذاشتن نقل قول داخل url() اختیاری است*/
+
+    /* فونتها */
+    font-family: Arial;
+    font-family: "Courier New"; /* اگر اسم فونت با فاصله همراه باشد باید داخل نقل قول یک یا دو نوشته شود */
+    font-family: "Courier New", Trebuchet, Arial, sans-serif; /* اگر فونت اولی پیدا نشد مرورگر به سراغ نام بعدی میرود */
+}
+```
+
+<h2 dir='rtl'>نحوه استفاده</h2>
+
+<p dir='rtl'>هر دستور CSS را که می خواهید در فایلی با پسوند <span dir="ltr">.css</span> ذخیره کنید </p>
+<p dir='rtl'>حالا با استفاده از کد زیر آنرا در قسمت `head` داخل فایل html خود تعریف کنید </p>
+
+```html
+<link rel='stylesheet' type='text/css' href='path/to/style.css' />
+```
+
+<p dir='rtl'>یا میتوان با استفاده از تگ `style` درون `head` دستورات CSS را به صورت درون برنامه ای تعریف کرد اما توسیه میشود تا جای ممکن از این کار اجتناب کنید. </p>
+
+```html
+<style>
+   a { color: purple; }
+</style>
+```
+
+<p dir='rtl'>همچنین شما میتوانید دستورات CSS را به عنوان یک مشخصه برای عنصر تعریف کنید ولی تا جای ممکن باید از این کار اجتناب کنید.</p>
+
+```html
+<div style="border: 1px solid red;">
+</div>
+```
+
+<h2 dir='rtl'>حق تقدم یا اولویت</h2>
+
+<p dir='rtl'>همانگونه که مشاهده کردید یک مشخصه می تواند به وسیله چندین انتخابگر انتخاب گردد.</p>
+<p dir='rtl'>و همچنین یک ویژگی میتواند چندین بار برای یک عنصر تعریف شود.</p>
+<p dir='rtl'>در این صورت یک دستور میتواند بر دستورات دیگر حق تقدم یا اولویت پیدا کند.</p>
+
+<p dir='rtl'>به مثال زیر توجه کنید:</p>
+
+```CSS
+/*A*/
+p.class1[attr='value']
+
+/*B*/
+p.class1 {}
+
+/*C*/
+p.class2 {}
+
+/*D*/
+p {}
+
+/*E*/
+p { property: value !important; }
+
+```
+
+<p dir='rtl'>و همچنین به کد زیر:</p>
+
+```html
+<p style='/*F*/ property:value;' class='class1 class2' attr='value'>
+</p>
+
+```
+‍‍
+<p dir='rtl'>حق تقدم یا اولویت برای مثال بالا به این صورت است:</p>
+<p dir='rtl'>توجه داشته باشید که حق تقدم برای هر کدام از ویژگیها است نه برای کل مجموعه.</p>
+
+<p dir='rtl'>E دارای بیشترین الویت برای اینکه از <span dir="ltr">`!important`</span> استفاده کرده.</p>
+<p dir='rtl'>اما توصیه میشود تا جای ممکن از این کار اجتناب کنید مگر اینکه اینکار ضرورت داشته باشد</p>
+<p dir='rtl'>اولویت بعدی با F است زیرا که از روش درون برنامه ای استفاده کرده </p>
+<p dir='rtl'>اولویت بعدی با A است زیرا که بیشتر از بقیه مشخص تر تعریف شپه </p>
+<p dir='rtl'>مشخص تر = مشخص کننده بیشتر. دارای ۳ مشخص کننده: ۱ تگ <span dir="ltr">`p`</span> + ۱ کلاس با نام <span dir="ltr">`class1`</span> + ۱ خاصیت <span dir="ltr">`attr="value"`</span></p>
+<p dir='rtl'>اولویت بعدی با C است که مشخصه یکسانی با B دارد ولی بعد از آن تعریف شده است.</p>
+<p dir='rtl'>اولویت بعدی با B</p>
+<p dir='rtl'>و در آخر D</p>
+
+<h2 dir='rtl'>سازگاری</h2>
+
+<p dir='rtl'>بسیار از ویژگیهای CSS2 (و به تدریج CSS3) بر روی تمام مرورگرها و دستگاه ها سازگارند.اما همیشه حیاتی است که سازگاری CSS مورد استفاده خود را با مرورگر هدف چک کنید.</p>
+
+<p dir='rtl'> یک منبع خوب برای این کار است</p>
+[QuirksMode CSS](http://www.quirksmode.org/css/)
+
+<p dir='rtl'>برای یک تست سازگاری سریع, منبع زیر میتواند کمک بزرگی برای این کار باشد.</p>
+[CanIUse](http://caniuse.com/)
+
+<h2 dir='rtl'> منابع دیگر </h2>
+
+
+[Understanding Style Precedence in CSS: Specificity, Inheritance, and the Cascade](http://www.vanseodesign.com/css/css-specificity-inheritance-cascaade/)
+
+[QuirksMode CSS](http://www.quirksmode.org/css/)
+
+[Z-Index - The stacking context](https://developer.mozilla.org/en-US/docs/Web/Guide/CSS/Understanding_z_index/The_stacking_context)
+
+
diff --git a/factor.html.markdown b/factor.html.markdown
index a0726420..79596d83 100644
--- a/factor.html.markdown
+++ b/factor.html.markdown
@@ -24,33 +24,33 @@ Code in this file can be typed into Factor, but not directly imported because th
 5 4 +    ! No output
 
 ! `.` pops the top result from the stack and prints it.
-.    ! 9 
+.    ! 9
 
 ! More examples of arithmetic:
-6 7 * .        ! 42 
-1360 23 - .    ! 1337 
-12 12 / .      ! 1 
-13 2 mod .     ! 1 
+6 7 * .        ! 42
+1360 23 - .    ! 1337
+12 12 / .      ! 1
+13 2 mod .     ! 1
 
-99 neg .       ! -99 
--99 abs .      ! 99 
-52 23 max .    ! 52 
-52 23 min .    ! 23 
+99 neg .       ! -99
+-99 abs .      ! 99
+52 23 max .    ! 52
+52 23 min .    ! 23
 
 ! A number of words are provided to manipulate the stack, collectively known as shuffle words.
 
 3 dup -          ! duplicate the top item (1st now equals 2nd): 3 - 3
 2 5 swap /       ! swap the top with the second element:        5 / 2
-4 0 drop 2 /     ! remove the top item (dont print to screen):  4 / 2
+4 0 drop 2 /     ! remove the top item (don't print to screen):  4 / 2
 1 2 3 nip .s     ! remove the second item (similar to drop):    1 3
 1 2 clear .s     ! wipe out the entire stack
-1 2 3 4 over .s  ! duplicate the second item to the top: 1 2 3 4 3 
+1 2 3 4 over .s  ! duplicate the second item to the top: 1 2 3 4 3
 1 2 3 4 2 pick .s ! duplicate the third item to the top: 1 2 3 4 2 3
 
-! Creating Words 
+! Creating Words
 ! The `:` word sets Factor into compile mode until it sees the `;` word.
 : square ( n -- n ) dup * ;    ! No output
-5 square .                     ! 25 
+5 square .                     ! 25
 
 ! We can view what a word does too.
 ! \ suppresses evaluation of a word and pushes its identifier on the stack instead.
@@ -88,9 +88,9 @@ Code in this file can be typed into Factor, but not directly imported because th
 0 [ "Zero is true" . ] when                     ! Zero is true
 f [ "F is true" . ] when                        ! No output
 f [ "F is false" . ] unless                     ! F is false
-2 [ "Two is true" . ] [ "Two is false" . ] if   ! Two is true 
+2 [ "Two is true" . ] [ "Two is false" . ] if   ! Two is true
 
-! By default the conditionals consume the value under test, but starred variants 
+! By default the conditionals consume the value under test, but starred variants
 ! leave it alone if it's true:
 
 5 [ . ] when*      ! 5
@@ -100,7 +100,7 @@ f [ . ] when*      ! No output, empty stack, f is consumed because it's false
 ! Loops
 ! You've guessed it.. these are higher order words too.
 
-5 [ . ] each-integer               ! 0 1 2 3 4 
+5 [ . ] each-integer               ! 0 1 2 3 4
 4 3 2 1 0 5 [ + . ] each-integer   ! 0 2 4 6 8
 5 [ "Hello" . ] times              ! Hello Hello Hello Hello Hello
 
@@ -114,7 +114,7 @@ f [ . ] when*      ! No output, empty stack, f is consumed because it's false
 ! Loop reducing or building lists:
 { 1 2 3 4 5 } [ 2 mod 0 = ] filter  ! Keeps only list members for which quotation yields true: { 2 4 }  
 { 2 4 6 8 } 0 [ + ] reduce .        ! Like "fold" in functional languages: prints 20 (0+2+4+6+8)
-{ 2 4 6 8 } 0 [ + ] accumulate . .  ! Like reduce but keeps the intermediate values in a list: prints { 0 2 6 12 } then 20 
+{ 2 4 6 8 } 0 [ + ] accumulate . .  ! Like reduce but keeps the intermediate values in a list: prints { 0 2 6 12 } then 20
 1 5 [ 2 * dup ] replicate .         ! Loops the quotation 5 times and collects the results in a list: { 2 4 8 16 32 }
 1 [ dup 100 < ] [ 2 * dup ] produce ! Loops the second quotation until the first returns false and collects the results: { 2 4 8 16 32 64 128 }
 
@@ -142,7 +142,7 @@ name get-global .       ! "Bob"
    2 :> c                 ! Declares immutable variable c to hold 2
    c . ;                  ! Print it out
 
-! In a word declared this way,  the input side of the stack declaration 
+! In a word declared this way,  the input side of the stack declaration
 ! becomes meaningful and gives the variable names stack values are captured into
 :: double ( a -- result ) a 2 * ;
 
@@ -150,7 +150,7 @@ name get-global .       ! "Bob"
 :: mword2 ( a! -- x y )   ! Capture top of stack in mutable variable a
    a                      ! Push a
    a 2 * a!               ! Multiply a by 2 and store result back in a
-   a ;                    ! Push new value of a 
+   a ;                    ! Push new value of a
 5 mword2                  ! Stack: 5 10
 
 ! Lists and Sequences
@@ -167,7 +167,7 @@ name get-global .       ! "Bob"
 "Concat" "enate" append                       ! "Concatenate" - strings are sequences too
 "Concatenate" "Reverse " prepend              ! "Reverse Concatenate"
 { "Concatenate " "seq " "of " "seqs" } concat ! "Concatenate seq of seqs"
-{ "Connect" "subseqs" "with" "separators" } " " join  ! "Connect subseqs with separators" 
+{ "Connect" "subseqs" "with" "separators" } " " join  ! "Connect subseqs with separators"
 
 ! And if you want to get meta, quotations are sequences and can be dismantled..
 0 [ 2 + ] nth                              ! 2
diff --git a/fi-fi/markdown-fi.html.markdown b/fi-fi/markdown-fi.html.markdown
index 14b0f1d9..c5ee52b0 100644
--- a/fi-fi/markdown-fi.html.markdown
+++ b/fi-fi/markdown-fi.html.markdown
@@ -50,8 +50,8 @@ __Kuten on tämäkin teksti.__
 **_Kuten tämäkin!_**
 *__Kuten tämäkin!__*
 
-<!-- Github-tyylisessä Markdownissa, jota käytetään tiedostojen esittämiseksi
-Githubissa, meillä on käytössämme myös yliviivaus: -->
+<!-- GitHub-tyylisessä Markdownissa, jota käytetään tiedostojen esittämiseksi
+GitHubissa, meillä on käytössämme myös yliviivaus: -->
 
 ~~Tämä teksti on yliviivattua.~~
 
@@ -150,7 +150,7 @@ rivin neljällä välilyönnillä tai tabulaattorilla. -->
 
 John ei tiennyt edes mitä `go_to()` -funktio teki!
 
-<!-- Githubin Markdownissa voit käyttää erityissyntaksia koodille. -->
+<!-- GitHubin Markdownissa voit käyttää erityissyntaksia koodille. -->
 
 \`\`\`ruby <!-- paitsi että poista nuo kenoviivat, vain ```ruby ! -->
 def foobar
@@ -158,7 +158,7 @@ def foobar
 end
 \`\`\` <!-- tästä myös, ei kenoviivoja, vain ``` -->
 
-<!-- Yllä oleva teksti ei vaadi sisennystä. Lisäksi Github käyttää ``` jälkeen
+<!-- Yllä oleva teksti ei vaadi sisennystä. Lisäksi GitHub käyttää ``` jälkeen
 mainitsemasi kielen syntaksin korostusta  -->
 
 <!-- Vaakaviiva (<hr />) -->
@@ -231,13 +231,13 @@ haluan kirjoittaa *tämän tekstin jonka ympärillä on asteriskit* mutta en hal
 sen kursivoituvan, joten teen näin: \*tämän tekstin ympärillä on asteriskit\*.
 
 <!-- Näppäimistön näppäimet -->
-<!-- Githubin Markdownissa, voit käyttää <kbd> -tagia esittämään näppäimiä -->
+<!-- GitHubin Markdownissa, voit käyttää <kbd> -tagia esittämään näppäimiä -->
 
 Tietokoneesi kaatui? Kokeile painaa
 <kbd>Ctrl</kbd>+<kbd>Alt</kbd>+<kbd>Del</kbd>
 
 <!-- Taulukot -->
-<!-- Taulukot ovat saatavilla vain Githubin markdownissa ja ne ovat melko
+<!-- Taulukot ovat saatavilla vain GitHubin markdownissa ja ne ovat melko
 vaivalloisia käyttää, mutta jos todella haluat: -->
 
 | Kolumni1     | Kolumni2 | Kolumni3      |
diff --git a/forth.html.markdown b/forth.html.markdown
index b4a5581b..55d755b2 100644
--- a/forth.html.markdown
+++ b/forth.html.markdown
@@ -54,7 +54,7 @@ Forth, but most of what is written here should work elsewhere.
 3 dup -          \ duplicate the top item (1st now equals 2nd): 3 - 3
 2 5 swap /       \ swap the top with the second element:        5 / 2
 6 4 5 rot .s     \ rotate the top 3 elements:                   4 5 6
-4 0 drop 2 /     \ remove the top item (dont print to screen):  4 / 2
+4 0 drop 2 /     \ remove the top item (don't print to screen):  4 / 2
 1 2 3 nip .s     \ remove the second item (similar to drop):    1 3
 
 \ ---------------------- More Advanced Stack Manipulation ----------------------
diff --git a/fr-fr/markdown.html.markdown b/fr-fr/markdown.html.markdown
index 66f0efbe..2e4e8461 100644
--- a/fr-fr/markdown.html.markdown
+++ b/fr-fr/markdown.html.markdown
@@ -62,8 +62,8 @@ __Celui-là aussi.__
 **_Pareil ici_**
 *__Et là!__*
 
-<!-- Dans le "Github Flavored Markdown", utilisé pour interpréter le Markdown 
-sur Github, on a également le strikethrough ( texte barré ) : -->
+<!-- Dans le "GitHub Flavored Markdown", utilisé pour interpréter le Markdown 
+sur GitHub, on a également le strikethrough ( texte barré ) : -->
 
 ~~Ce texte est barré avec strikethrough.~~
 
@@ -172,7 +172,7 @@ fonctionne aussi à l'intérieur du bloc de code -->
 
 La fonction `run()` ne vous oblige pas à aller courir!
 
-<!-- Via Github Flavored Markdown, vous pouvez utiliser 
+<!-- Via GitHub Flavored Markdown, vous pouvez utiliser 
 des syntaxes spécifiques -->
 
 \`\`\`ruby 
@@ -183,7 +183,7 @@ puts "Hello world!"
 end
 \`\`\` <!-- pareil, pas de backslashes, juste ``` en guise de fin -->
 
-<-- Pas besoin d'indentation pour le code juste au dessus, de plus, Github 
+<-- Pas besoin d'indentation pour le code juste au dessus, de plus, GitHub 
 va utiliser une coloration syntaxique pour le langage indiqué après les ``` -->
 
 <!-- Ligne Horizontale (<hr />) -->
@@ -264,7 +264,7 @@ Pour taper *ce texte* entouré d'astérisques mais pas en italique :
 Tapez \*ce texte\*.
 
 <!-- Tableaux -->
-<!-- les Tableaux ne sont disponibles que dans le Github Flavored Markdown
+<!-- les Tableaux ne sont disponibles que dans le GitHub Flavored Markdown
  et c'est ce n'est pas super agréable d'utilisation. 
  Mais si vous en avez besoin :
  -->
diff --git a/git.html.markdown b/git.html.markdown
index e7ca07d6..282abbd2 100644
--- a/git.html.markdown
+++ b/git.html.markdown
@@ -35,6 +35,7 @@ Version control is a system that records changes to a file(s), over time.
 * Can work offline.
 * Collaborating with others is easy!
 * Branching is easy!
+* Branching is fast!
 * Merging is easy!
 * Git is fast.
 * Git is flexible.
@@ -540,7 +541,7 @@ $ git rm /pather/to/the/file/HelloWorld.c
 
 * [Atlassian Git - Tutorials & Workflows](https://www.atlassian.com/git/)
 
-* [SalesForce Cheat Sheet](https://na1.salesforce.com/help/doc/en/salesforce_git_developer_cheatsheet.pdf)
+* [SalesForce Cheat Sheet](http://res.cloudinary.com/hy4kyit2a/image/upload/SF_git_cheatsheet.pdf)
 
 * [GitGuys](http://www.gitguys.com/)
 
diff --git a/hy.html.markdown b/hy.html.markdown
index 9beaff0c..79c16c23 100644
--- a/hy.html.markdown
+++ b/hy.html.markdown
@@ -3,13 +3,14 @@ language: hy
 filename: learnhy.hy
 contributors:
     - ["Abhishek L", "http://twitter.com/abhishekl"]
+    - ["Zirak", "http://zirak.me"]
 ---
 
 Hy is a lisp dialect built on top of python. This is achieved by
 converting hy code to python's abstract syntax tree (ast). This allows
 hy to call native python code or python to call native hy code as well
 
-This tutorial works for hy ≥ 0.9.12
+This tutorial works for hy ≥ 0.9.12, with some corrections for hy 0.11.
 
 ```clojure
 ;; this gives an gentle introduction to hy for a quick trial head to
@@ -89,6 +90,17 @@ True ; => True
 (foolists 3) ;=> [3 2]
 (foolists 10 3) ;=> [10 3]
 
+; you can use rest arguments and kwargs too:
+(defn something-fancy [wow &rest descriptions &kwargs props]
+  (print "Look at" wow)
+  (print "It's" descriptions)
+  (print "And it also has:" props))
+
+(something-fancy "My horse" "amazing" :mane "spectacular")
+  
+; you use apply instead of the splat operators:
+(apply something-fancy ["My horse" "amazing"] { "mane" "spectacular" })
+
 ; anonymous functions are created using `fn' or `lambda' constructs
 ; which are similiar to `defn'
 (map (fn [x] (* x x)) [1 2 3 4]) ;=> [1 4 9 16]
@@ -102,6 +114,8 @@ True ; => True
 
 ; slice lists using slice
 (slice mylist 1 3) ;=> [2 3]
+; or, in hy 0.11, use cut instead:
+(cut mylist 1 3) ;=> [2 3]
 
 ; get elements from a list or dict using `get'
 (get mylist 1) ;=> 2
@@ -122,6 +136,22 @@ True ; => True
 ; a.foo(arg) is called as (.foo a arg)
 (.split (.strip "hello world  ")) ;=> ["hello" "world"]
 
+; there is a shortcut for executing multiple functions on a value called the
+; "threading macro", denoted by an arrow:
+(-> "hello world  " (.strip) (.split)) ;=> ["hello" "world]
+; the arrow passes the value along the calls as the first argument, for instance:
+(-> 4 (* 3) (+ 2))
+; is the same as:
+(+ (* 4 3) 2)
+
+; there is also a "threading tail macro", which instead passes the value as the
+; second argument. compare:
+(-> 4 (- 2) (+ 1)) ;=> 3
+(+ (- 4 2) 1) ;=> 3
+; to:
+(->> 4 (- 2) (+ 1)) ;=> -1
+(+ 1 (- 2 4)) ;=> -1
+
 ;; Conditionals
 ; (if condition (body-if-true) (body-if-false)
 (if (= passcode "moria")
@@ -160,6 +190,14 @@ True ; => True
    [get-spell (fn [self]
               self.spell)]])
 
+; or, in hy 0.11:
+(defclass Wizard [object]
+  (defn --init-- [self spell]
+    (setv self.spell spell))
+
+  (defn get-spell [self]
+    self.spell))
+
 ;; do checkout hylang.org
 ```
 
@@ -169,6 +207,6 @@ This tutorial is just a very basic introduction to hy/lisp/python.
 
 Hy docs are here: [http://hy.readthedocs.org](http://hy.readthedocs.org)
 
-Hy's Github repo: [http://github.com/hylang/hy](http://github.com/hylang/hy)
+Hy's GitHub repo: [http://github.com/hylang/hy](http://github.com/hylang/hy)
 
 On freenode irc #hy, twitter hashtag #hylang
diff --git a/it-it/coffeescript-it.html.markdown b/it-it/coffeescript-it.html.markdown
index 31973369..d30ba819 100644
--- a/it-it/coffeescript-it.html.markdown
+++ b/it-it/coffeescript-it.html.markdown
@@ -4,8 +4,6 @@ contributors:
   - ["Luca 'Kino' Maroni", "http://github.com/kino90"]
   - ["Tenor Biel", "http://github.com/L8D"]
   - ["Xavier Yao", "http://github.com/xavieryao"]
-translators:
-    - ["Tommaso Pifferi","http://github.com/neslinesli93"]
 filename: coffeescript-it.coffee
 lang: it-it
 ---
diff --git a/it-it/git-it.html.markdown b/it-it/git-it.html.markdown
new file mode 100644
index 00000000..521538a1
--- /dev/null
+++ b/it-it/git-it.html.markdown
@@ -0,0 +1,498 @@
+---
+category: tool
+tool: git
+contributors:
+    - ["Jake Prather", "http://github.com/JakeHP"]
+    - ["Leo Rudberg" , "http://github.com/LOZORD"]
+    - ["Betsy Lorton" , "http://github.com/schbetsy"]
+    - ["Bruno Volcov", "http://github.com/volcov"]
+translators:
+    - ["Christian Grasso", "http://chris54721.net"]
+filename: LearnGit-it.txt
+lang: it-it
+---
+
+Git è un sistema di
+[controllo versione distribuito](https://it.wikipedia.org/wiki/Controllo_versione_distribuito)
+e di gestione del codice sorgente.
+
+Git esegue una serie di _snapshot_ per salvare lo stato di un progetto, così
+facendo può fornirti la possibilità di gestire il tuo codice e di salvarne lo
+stato assegnando delle versioni.
+
+## Basi del controllo versione
+
+### Cos'è il controllo versione?
+
+Il controllo versione (_Version Control_ o _Versioning_) è un sistema che
+registra le modifiche apportate a uno o più file nel tempo.
+
+### Controllo versione centralizzato e distribuito
+
+* Il controllo versione centralizzato si concentra sulla sincronizzazione, il
+  monitoraggio e il backup dei file.
+* Il controllo versione distribuito si concentra sulla condivisione delle
+  modifiche. Ogni modifica ha un identificatore univoco.
+* I sistemi distribuiti non hanno una struttura definita. Si potrebbe creare
+  ad esempio un sistema centralizzato simile a SVN utilizzando Git.
+
+[Ulteriori informazioni](http://git-scm.com/book/it/v1/Per-Iniziare-Il-Controllo-di-Versione)
+
+### Perchè usare Git?
+
+* Consente di lavorare offline.
+* Collaborare con altre persone è semplice!
+* Utilizzare i branch (rami di sviluppo) è semplice!
+* Git è veloce.
+* Git è flessibile.
+
+## Architettura di Git
+
+### Repository
+
+Un insieme di file, cartelle, registrazioni della cronologia e versioni.
+Immaginalo come una struttura dati del codice, con la caratteristica che ogni
+"elemento" del codice ti fornisce accesso alla sua cronologia delle revisioni,
+insieme ad altre cose.
+
+Un repository comprende la cartella .git e il working tree.
+
+### Cartella .git (componente del repository)
+
+La cartella .git contiene tutte le configurazioni, i log, i rami e altro.
+[Lista dettagliata](http://gitready.com/advanced/2009/03/23/whats-inside-your-git-directory.html)
+
+### Working Tree (componente del repository)
+
+Si tratta semplicemente delle cartelle e dei file presenti nel repository.
+Spesso viene indicato come "directory di lavoro" ("working directory").
+
+### Index (componente della cartella .git)
+
+L'Index è l'area di staging di Git. Si tratta di un livello che separa il
+working tree dal repository. Ciò fornisce agli sviluppatori più controllo su
+cosa viene inviato al repository.
+
+### Commit
+
+Un commit è uno snapshot di una serie di modifiche apportate al working tree.
+Ad esempio, se hai aggiunto 5 file e ne hai rimossi 2, ciò sarà registrato in
+un commit. Il commit può essere pushato (inviato) o meno ad altri repository.
+
+### Branch (ramo)
+
+Un branch (ramo) è essenzialmente un puntatore all'ultimo commit che hai
+effettuato. Effettuando altri commit, il puntatore verrà automaticamente
+aggiornato per puntare all'ultimo commit.
+
+### Tag
+
+Un tag è un contrassegno applicato a un punto specifico nella cronologia dei
+commit. Di solito i tag vengono utilizzati per contrassegnare le versioni
+rilasciate (v1.0, v1.1, etc.).
+
+### HEAD e head (componenti della cartella .git)
+
+HEAD (in maiuscolo) è un puntatore che punta al branch corrente. Un repository
+può avere solo 1 puntatore HEAD *attivo*.
+
+head (in minuscolo) è un puntatore che può puntare a qualsiasi commit. Un
+repository può avere un numero qualsiasi di puntatori head.
+
+### Stadi di Git
+* _Modified_ - Un file è stato modificato, ma non è ancora stato effettuato
+  un commit per registrare le modifiche nel database di Git
+* _Staged_ - Un file modificato è stato contrassegnato per essere incluso nel
+  prossimo commit
+* _Committed_ - È stato effettuato un commit e le modifiche sono state
+  registrate nel database di Git
+
+## Comandi
+
+### init
+
+Crea un repository Git vuoto. Le impostazioni e le informazioni del repository
+sono salvate nella cartella ".git".
+
+```bash
+$ git init
+```
+
+### config
+
+Utilizzato per configurare le impostazioni, sia specifiche del repository, sia
+a livello globale. Le impostazioni globali sono salvate in `~/.gitconfig`.
+
+```bash
+$ git config --global user.email "email@example.com"
+$ git config --global user.name "Nome utente"
+```
+
+[Ulteriori informazioni su git config](http://git-scm.com/docs/git-config)
+
+### help
+
+Fornisce una documentazione molto dettagliata di ogni comando.
+
+```bash
+# Mostra i comandi più comuni
+$ git help
+
+# Mostra tutti i comandi disponibili
+$ git help -a
+
+# Documentazione di un comando specifico
+# git help <nome_comando>
+$ git help add
+$ git help commit
+$ git help init
+# oppure git <nome_comando> --help
+$ git add --help
+$ git commit --help
+$ git init --help
+```
+
+### Ignorare file
+
+Per impedire intenzionalmente che file privati o temporanei vengano inviati
+al repository Git.
+
+```bash
+$ echo "temp/" >> .gitignore
+$ echo "privato.txt" >> .gitignore
+```
+
+
+### status
+
+Mostra le differenza tra lo stato attuale del working tree e l'attuale commit
+HEAD.
+
+```bash
+$ git status
+```
+
+### add
+
+Aggiunge file alla staging area, ovvero li contrassegna per essere inclusi nel
+prossimo commit. Ricorda di aggiungere i nuovi file, altrimenti non saranno
+inclusi nei commit!
+
+```bash
+# Aggiunge un file nella directory attuale
+$ git add HelloWorld.java
+
+# Aggiunge un file in una sottocartella
+$ git add /path/to/file/HelloWorld.c
+
+# Il comando supporta le espressioni regolari
+$ git add ./*.java
+
+# Aggiunge tutti i file non ancora contrassegnati
+$ git add --all
+```
+
+Questo comando contrassegna soltanto i file, senza effettuare un commit.
+
+### branch
+
+Utilizzato per gestire i branch (rami). Puoi visualizzare, modificare, creare o
+eliminare branch utilizzando questo comando.
+
+```bash
+# Visualizza i branch e i remote
+$ git branch -a
+
+# Crea un nuovo branch
+$ git branch nuovoBranch
+
+# Elimina un branch
+$ git branch -d nomeBranch
+
+# Rinomina un branch
+$ git branch -m nomeBranch nuovoNomeBranch
+
+# Permette di modificare la descrizione di un branch
+$ git branch nomeBranch --edit-description
+```
+
+### tag
+
+Utilizzato per gestire i tag.
+
+```bash
+# Visualizza i tag esistenti
+$ git tag
+# Crea un nuovo tag
+# L'opzione -m consente di specificare una descrizione per il tag.
+# Se l'opzione -m non viene aggiunta, Git aprirà un editor per consentire
+# l'inserimento del messaggio.
+$ git tag -a v2.0 -m 'Versione 2.0'
+# Mostra informazioni relative a un tag
+# Include informazioni sul creatore del tag, la data di creazione, e il
+# messaggio assegnato al tag oltre alle informazioni sul commit.
+$ git show v2.0
+```
+
+### checkout
+
+Consente di cambiare branch o ripristinare i file a una revisione specifica.
+Tutti i file nel working tree vengono aggiornati per corrispondere alla versione
+presente nel branch o nel commit specificato.
+
+```bash
+# Effettua il checkout di un repository - il branch predefinito è 'master'
+$ git checkout
+# Effettua il checkout di un branch specifico
+$ git checkout nomeBranch
+# Crea un nuovo branch e ne effettua il checkout
+# Equivalente a "git branch <nomeBranch>; git checkout <nomeBranch>"
+$ git checkout -b nuovoBranch
+```
+
+### clone
+
+Clona, o copia, un repository esistente in una nuova directory. Inoltre,
+aggiunge dei branch _remote-tracking_, utilizzati per monitorare i branch
+remoti corrispondenti a quelli locali, e consentendo così di inviare le
+modifiche al repository remoto.
+
+```bash
+# Clona learnxinyminutes-docs
+$ git clone https://github.com/adambard/learnxinyminutes-docs.git
+# Clona solo l'ultima revisione di un repository
+$ git clone --depth 1 https://github.com/adambard/learnxinyminutes-docs.git
+# Clona solo un branch specifico
+$ git clone -b master-cn https://github.com/adambard/learnxinyminutes-docs.git --single-branch
+```
+
+### commit
+
+Effettua uno _snapshot_ dello stato attuale del working tree e registra le
+modifiche in un nuovo commit. Il commit contiene, oltre alle modifiche apportate,
+anche l'autore e una descrizione.
+
+```bash
+# Crea un nuovo commit con un messaggio
+$ git commit -m "Aggiunta la funzione multiplyNumbers() in HelloWorld.c"
+
+# Aggiunge (git add) automaticamente i file modificati o eliminati (ESCLUSI
+# i nuovi file) e quindi effettua il commit
+$ git commit -a -m "Modificato foo.php e rimosso bar.php"
+
+# Modifica l'ultimo commit (il comando elimina il commit precedente e lo
+# sostituisce con uno nuovo)
+$ git commit --amend -m "Messaggio corretto"
+```
+
+### diff
+
+Mostra la differenza tra un file nel working tree e la sua versione nell'index,
+in un branch o ad un commit specifico.
+
+```bash
+# Mostra la differenza tra il working tree e l'index
+$ git diff
+
+# Mostra la differenza tra l'index e il commit più recente
+$ git diff --cached
+
+# Mostra la differenza tra il working tree e un commit specifico
+$ git diff <commit>
+
+# Mostra la differenza tra due commit
+$ git diff <commit1> <commit2>
+```
+
+### grep
+
+Consente di effettuare una ricerca veloce nel repository.
+
+```bash
+# Cerca "variableName" nei file Java
+$ git grep 'variableName' -- '*.java'
+
+# Cerca una riga contenente "arrayListName" E "add" oppure "remove"
+$ git grep -e 'arrayListName' --and \( -e add -e remove \)
+```
+
+Impostazioni relative a `git grep`:
+
+```bash
+# Mostra il numero delle righe
+$ git config --global grep.lineNumber true
+
+# Rende i risultati più leggibili
+$ git config --global alias.g "grep --break --heading --line-number"
+```
+
+### log
+
+Mostra la cronologia dei commit inviati al repository.
+
+```bash
+# Mostra tutti i commit
+$ git log
+
+# Mostra ogni commit su una sola riga
+$ git log --oneline
+
+# Mostra solo i commit legati ai merge
+$ git log --merges
+```
+
+### merge
+
+Effettua un "merge", ovvero unisce le modifiche di un branch in quello attuale.
+
+```bash
+# Unisce il branch specificato a quello attuale
+$ git merge nomeBranch
+
+# Genera un commit in ogni caso dopo aver eseguito il merge
+$ git merge --no-ff nomeBranch
+```
+
+### mv
+
+Rinomina o sposta un file.
+
+```bash
+# Rinomina un file
+$ git mv HelloWorld.c HelloNewWorld.c
+
+# Sposta un file
+$ git mv HelloWorld.c ./new/path/HelloWorld.c
+
+# Forza l'esecuzione del comando
+# Se un file "nuovoNomeFile" esiste già nella directory, verrà sovrascritto
+$ git mv -f nomeFile nuovoNomeFile
+```
+
+### pull
+
+Aggiorna il repository effettuando il merge delle nuove modifiche.
+
+```bash
+# Aggiorna il branch attuale dal remote "origin"
+$ git pull
+
+# Di default, git pull aggiorna il branch attuale effettuando il merge
+# delle nuove modifiche presenti nel branch remote-tracking corrispondente
+$ git pull
+
+# Aggiorna le modifiche dal branch remoto, quindi effettua il rebase dei commit
+# nel branch locale
+# Equivalente a: "git pull <remote> <branch>; git rebase <branch>"
+$ git pull origin master --rebase
+```
+
+### push
+
+Invia ed effettua il merge delle modifiche da un branch locale ad uno remoto.
+
+```bash
+# Invia ed effettua il merge delle modifiche dal branch "master"
+# al remote "origin".
+# git push <remote> <branch>
+$ git push origin master
+
+# Di default, git push invia ed effettua il merge delle modifiche
+# dal branch attuale al branch remote-tracking corrispondente
+$ git push
+
+# Per collegare il branch attuale ad uno remoto, basta aggiungere l'opzione -u
+$ git push -u origin master
+```
+
+### stash
+
+Salva lo stato attuale del working tree in una lista di modifiche non ancora
+inviate al repository con un commit che possono essere applicate nuovamente
+in seguito.
+
+Questo comando può essere utile se, ad esempio, mentre stai effettuando delle
+modifiche non ancora completate, hai bisogno di aggiornare il repository locale
+con `git pull`. Poichè non hai ancora effettuato il commit di tutte le modifiche,
+non sarà possibile effettuare il pull. Tuttavia, puoi utilizzare `git stash` per
+salvare temporaneamente le modifiche e applicarle in seguito.
+
+```bash
+$ git stash
+```
+
+Ora puoi effettuare il pull:
+
+```bash
+$ git pull
+```
+
+A questo punto, come già suggerito dall'output del comando `git stash`, puoi
+applicare le modifiche:
+
+```bash
+$ git stash apply
+```
+
+Infine puoi controllare che tutto sia andato bene:
+
+```bash
+$ git status
+```
+
+Puoi visualizzare gli accantonamenti che hai effettuato finora utilizzando:
+
+```bash
+$ git stash list
+```
+
+### rebase (attenzione)
+
+Applica le modifiche effettuate su un branch su un altro branch.
+*Non effettuare il rebase di commit che hai già inviato a un repository pubblico!*
+
+```bash
+# Effettua il rebase di experimentBranch in master
+$ git rebase master experimentBranch
+```
+
+[Ulteriori informazioni](https://git-scm.com/book/it/v1/Diramazioni-in-Git-Rifondazione)
+
+### reset (attenzione)
+
+Effettua il reset del commit HEAD attuale ad uno stato specifico.
+Questo comando consente di annullare `merge`, `pull`, `commit`, `add` e altro.
+Tuttavia, può essere pericoloso se non si sa cosa si sta facendo.
+
+```bash
+# Effettua il reset della staging area (annullando le aggiunte e le rimozioni
+# di file dal repository, senza modificare il working tree)
+$ git reset
+
+# Effettua il reset completo della staging area, ovvero annulla qualsiasi
+# modifica al repository eliminando definitivamente anche tutte le modifiche
+# ai file non inviate e ripristinando il working tree
+$ git reset --hard
+
+# Effettua il reset del branch attuale al commit specificato (lasciando il
+# working tree intatto)
+$ git reset 31f2bb1
+
+# Effettua il reset completo del branch attuale al commit specificato,
+# eliminando qualsiasi modifica non inviata
+$ git reset --hard 31f2bb1
+```
+
+### rm
+
+Consente di rimuovere un file dal working tree e dal repository.
+Per eliminare un file solo dal working tree ma non dal repository, è invece
+necessario utilizzare `/bin/rm`.
+
+```bash
+# Elimina un file nella directory attuale
+$ git rm HelloWorld.c
+
+# Elimina un file da una sottocartella
+$ git rm /pather/to/the/file/HelloWorld.c
+```
diff --git a/java.html.markdown b/java.html.markdown
index 50629ce1..48e6ec75 100644
--- a/java.html.markdown
+++ b/java.html.markdown
@@ -17,9 +17,11 @@ programming language.
 
 ```java
 // Single-line comments start with //
+
 /*
 Multi-line comments look like this.
 */
+
 /**
 JavaDoc comments look like this. Used to describe the Class or various
 attributes of a Class.
@@ -30,11 +32,12 @@ import java.util.ArrayList;
 // Import all classes inside of java.security package
 import java.security.*;
 
-// Each .java file contains one outer-level public class, with the same name as
-// the file.
+// Each .java file contains one outer-level public class, with the same name
+// as the file.
 public class LearnJava {
 
-    // In order to run a java program, it must have a main method as an entry point.
+    // In order to run a java program, it must have a main method as an entry 
+    // point.
     public static void main (String[] args) {
 
         // Use System.out.println() to print lines.
@@ -60,7 +63,8 @@ public class LearnJava {
         */
         // Declare a variable using <type> <name>
         int fooInt;
-        // Declare multiple variables of the same type <type> <name1>, <name2>, <name3>
+        // Declare multiple variables of the same 
+        // type <type> <name1>, <name2>, <name3>
         int fooInt1, fooInt2, fooInt3;
 
         /*
@@ -69,7 +73,8 @@ public class LearnJava {
 
         // Initialize a variable using <type> <name> = <val>
         int fooInt = 1;
-        // Initialize multiple variables of same type with same value <type> <name1>, <name2>, <name3> = <val>
+        // Initialize multiple variables of same type with same 
+        // value <type> <name1>, <name2>, <name3> = <val>
         int fooInt1, fooInt2, fooInt3;
         fooInt1 = fooInt2 = fooInt3 = 1;
 
@@ -119,18 +124,15 @@ public class LearnJava {
         final double E;
         E = 2.71828;
 
-
         // BigInteger - Immutable arbitrary-precision integers
         //
         // BigInteger is a data type that allows programmers to manipulate
         // integers longer than 64-bits. Integers are stored as an array of
         // of bytes and are manipulated using functions built into BigInteger
         //
-        // BigInteger can be initialized using an array of bytes or a string.
-        
+        // BigInteger can be initialized using an array of bytes or a string.        
         BigInteger fooBigInteger = new BigInteger(fooByteArray);
 
-
         // BigDecimal - Immutable, arbitrary-precision signed decimal number
         //
         // A BigDecimal takes two parts: an arbitrary precision integer 
@@ -142,16 +144,13 @@ public class LearnJava {
         //
         // BigDecimal can be initialized with an int, long, double or String
         // or by initializing the unscaled value (BigInteger) and scale (int).
-
         BigDecimal fooBigDecimal = new BigDecimal(fooBigInteger, fooInt);
         
         // Be wary of the constructor that takes a float or double as
         // the inaccuracy of the float/double will be copied in BigDecimal.
         // Prefer the String constructor when you need an exact value.
-        
         BigDecimal tenCents = new BigDecimal("0.1");
 
-
         // Strings
         String fooString = "My String Is Here!";
 
@@ -184,7 +183,7 @@ public class LearnJava {
         intArray[1] = 1;
         System.out.println("intArray @ 1: " + intArray[1]); // => 1
 
-        // Others to check out
+        // Other data types worth checking out
         // ArrayLists - Like arrays except more functionality is offered, and
         //              the size is mutable.
         // LinkedLists - Implementation of doubly-linked list. All of the
@@ -212,7 +211,7 @@ public class LearnJava {
         System.out.println("1+2 = " + (i1 + i2)); // => 3
         System.out.println("2-1 = " + (i2 - i1)); // => 1
         System.out.println("2*1 = " + (i2 * i1)); // => 2
-        System.out.println("1/2 = " + (i1 / i2)); // => 0 (int/int returns an int)
+        System.out.println("1/2 = " + (i1 / i2)); // => 0 (int/int returns int)
         System.out.println("1/2 = " + (i1 / (double)i2)); // => 0.5
 
         // Modulo
@@ -242,7 +241,7 @@ public class LearnJava {
         |      Bitwise inclusive OR
         */
 
-        // Incrementations
+        // Increment operators
         int i = 0;
         System.out.println("\n->Inc/Dec-rementation");
         // The ++ and -- operators increment and decrement by 1 respectively.
@@ -314,7 +313,6 @@ public class LearnJava {
         // for each loop structure => for (<object> : <iterable>)
         // reads as: for each element in the iterable
         // note: the object type must match the element type of the iterable.
-
         for (int bar : fooList) {
             System.out.println(bar);
             //Iterates 9 times and prints 1-9 on new lines
@@ -364,7 +362,6 @@ public class LearnJava {
         String bar = (foo < 10) ? "A" : "B";
         System.out.println(bar); // Prints A, because the statement is true
 
-
         ////////////////////////////////////////
         // Converting Data Types And Typecasting
         ////////////////////////////////////////
@@ -387,7 +384,6 @@ public class LearnJava {
         // with some more intermediate concepts. Feel free to check it out here:
         // http://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html
 
-
         ///////////////////////////////////////
         // Classes And Functions
         ///////////////////////////////////////
@@ -409,7 +405,6 @@ public class LearnJava {
         // Double Brace Initialization
         // The Java Language has no syntax for how to create static Collections
         // in an easy way. Usually you end up in the following way:
-
         private static final Set<String> COUNTRIES = new HashSet<String>();
         static {
            validCodes.add("DENMARK");
@@ -420,7 +415,6 @@ public class LearnJava {
         // But there's a nifty way to achieve the same thing in an
         // easier way, by using something that is called Double Brace
         // Initialization.
-
         private static final Set<String> COUNTRIES = new HashSet<String>() {{
             add("DENMARK");
             add("SWEDEN");
@@ -436,11 +430,9 @@ public class LearnJava {
     } // End main method
 } // End LearnJava class
 
-
 // You can include other, non-public outer-level classes in a .java file,
 // but it is not good practice. Instead split classes into separate files.
 
-
 // Class Declaration Syntax:
 // <public/private/protected> class <class name> {
 //    // data fields, constructors, functions all inside.
@@ -454,7 +446,6 @@ class Bicycle {
     private int speed;  // Private: Only accessible from within the class
     protected int gear; // Protected: Accessible from the class and subclasses
     String name; // default: Only accessible from within this package
-
     static String className; // Static class variable
 
     // Static block 
@@ -476,7 +467,6 @@ class Bicycle {
         speed = 5;
         name = "Bontrager";
     }
-
     // This is a constructor that takes arguments
     public Bicycle(int startCadence, int startSpeed, int startGear,
         String name) {
@@ -501,23 +491,18 @@ class Bicycle {
     public void setCadence(int newValue) {
         cadence = newValue;
     }
-
     public void setGear(int newValue) {
         gear = newValue;
     }
-
     public void speedUp(int increment) {
         speed += increment;
     }
-
     public void slowDown(int decrement) {
         speed -= decrement;
     }
-
     public void setName(String newName) {
         name = newName;
     }
-
     public String getName() {
         return name;
     }
@@ -566,10 +551,8 @@ public interface Digestible {
     public void digest();
 }
 
-
 // We can now create a class that implements both of these interfaces.
-public class Fruit implements Edible, Digestible {
-  
+public class Fruit implements Edible, Digestible {  
     @Override
     public void eat() {
         // ...
@@ -585,7 +568,6 @@ public class Fruit implements Edible, Digestible {
 // interfaces. For example:
 public class ExampleClass extends ExampleClassParent implements InterfaceOne,
     InterfaceTwo {
-
     @Override
     public void InterfaceOneMethod() {
     }
@@ -604,14 +586,13 @@ public class ExampleClass extends ExampleClassParent implements InterfaceOne,
 //     // Method declarations
 // }
 
-// Marking a class as abstract means that it contains abstract methods that must
-// be defined in a child class. Similar to interfaces, abstract classes cannot
-// be instantiated, but instead must be extended and the abstract methods
-// defined. Different from interfaces, abstract classes can contain a mixture of
+// Marking a class as abstract means that it contains abstract methods that
+// must be defined in a child class. Similar to interfaces, abstract classes
+// cannot be instantiated, but instead must be extended and the abstract
+// methods defined. Different from interfaces, abstract classes can contain a
 // concrete and abstract methods. Methods in an interface cannot have a body,
-// unless the method is static, and variables are final by default, unlike an
-// abstract class. Also abstract classes CAN have the "main" method.
-
+// mixture of unless the method is static, and variables are final by default,
+// unlike an abstract class. Also abstract classes CAN have the "main" method.
 public abstract class Animal
 {
     public abstract void makeSound();
@@ -656,7 +637,7 @@ class Dog extends Animal
     // @Override annotation here, since java doesn't allow
     // overriding of static methods.
     // What is happening here is called METHOD HIDING.
-    // Check out this awesome SO post: http://stackoverflow.com/questions/16313649/
+    // Check out this SO post: http://stackoverflow.com/questions/16313649/
     public static void main(String[] args)
     {
         Dog pluto = new Dog();
@@ -695,33 +676,29 @@ public abstract class Mammal()
     // Final Method Syntax:
     // <access modifier> final <return type> <function name>(<args>)
 
-    // Final methods, like, final classes cannot be overridden by a child class,
-    // and are therefore the final implementation of the method.
+    // Final methods, like, final classes cannot be overridden by a child
+    // class, and are therefore the final implementation of the method.
     public final boolean isWarmBlooded()
     {
         return true;
     }
 }
 
-
 // Enum Type
 //
 // An enum type is a special data type that enables for a variable to be a set
-// of predefined constants. The variable must be equal to one of the values that
-// have been predefined for it. Because they are constants, the names of an enum
-// type's fields are in uppercase letters. In the Java programming language, you
-// define an enum type by using the enum keyword. For example, you would specify
-// a days-of-the-week enum type as:
-
+// of predefined constants. The variable must be equal to one of the values
+// that have been predefined for it. Because they are constants, the names of
+// an enum type's fields are in uppercase letters. In the Java programming
+// language, you define an enum type by using the enum keyword. For example,
+// you would specify a days-of-the-week enum type as:
 public enum Day {
     SUNDAY, MONDAY, TUESDAY, WEDNESDAY,
     THURSDAY, FRIDAY, SATURDAY 
 }
 
 // We can use our enum Day like that:
-
 public class EnumTest {
-    
     // Variable Enum
     Day day;
     
@@ -734,16 +711,13 @@ public class EnumTest {
             case MONDAY:
                 System.out.println("Mondays are bad.");
                 break;
-                    
             case FRIDAY:
                 System.out.println("Fridays are better.");
-                break;
-                         
+                break;   
             case SATURDAY: 
             case SUNDAY:
                 System.out.println("Weekends are best.");
-                break;
-                        
+                break;     
             default:
                 System.out.println("Midweek days are so-so.");
                 break;
@@ -793,7 +767,6 @@ The links provided here below are just to get an understanding of the topic, fee
 
 * [Codingbat.com](http://codingbat.com/java)
 
-
 **Books**:
 
 * [Head First Java](http://www.headfirstlabs.com/books/hfjava/)
@@ -802,4 +775,4 @@ The links provided here below are just to get an understanding of the topic, fee
 
 * [Objects First with Java](http://www.amazon.com/Objects-First-Java-Practical-Introduction/dp/0132492660)
 
-* [Java The Complete Reference](http://www.amazon.com/gp/product/0071606300)
+* [Java The Complete Reference](http://www.amazon.com/gp/product/0071606300)
\ No newline at end of file
diff --git a/julia.html.markdown b/julia.html.markdown
index 2810555e..23d834f4 100644
--- a/julia.html.markdown
+++ b/julia.html.markdown
@@ -9,7 +9,7 @@ filename: learnjulia.jl
 Julia is a new homoiconic functional language focused on technical computing.
 While having the full power of homoiconic macros, first-class functions, and low-level control, Julia is as easy to learn and use as Python.
 
-This is based on Julia 0.3.
+This is based on Julia 0.4.
 
 ```ruby
 
@@ -23,7 +23,7 @@ This is based on Julia 0.3.
 ## 1. Primitive Datatypes and Operators
 ####################################################
 
-# Everything in Julia is a expression.
+# Everything in Julia is an expression.
 
 # There are several basic types of numbers.
 3 # => 3 (Int64)
@@ -155,7 +155,7 @@ b = [4; 5; 6] # => 3-element Int64 Array: [4, 5, 6]
 b[1] # => 4
 b[end] # => 6
 
-# 2-dimentional arrays use space-separated values and semicolon-separated rows.
+# 2-dimensional arrays use space-separated values and semicolon-separated rows.
 matrix = [1 2; 3 4] # => 2x2 Int64 Array: [1 2; 3 4]
 
 # Arrays of a particular Type
@@ -272,8 +272,8 @@ values(filled_dict)
 # Note - Same as above regarding key ordering.
 
 # Check for existence of keys in a dictionary with in, haskey
-in(("one", 1), filled_dict) # => true
-in(("two", 3), filled_dict) # => false
+in(("one" => 1), filled_dict) # => true
+in(("two" => 3), filled_dict) # => false
 haskey(filled_dict, "one") # => true
 haskey(filled_dict, 1) # => false
 
@@ -292,7 +292,7 @@ get(filled_dict,"four",4) # => 4
 # Use Sets to represent collections of unordered, unique values
 empty_set = Set() # => Set{Any}()
 # Initialize a set with values
-filled_set = Set(1,2,2,3,4) # => Set{Int64}(1,2,3,4)
+filled_set = Set([1,2,2,3,4]) # => Set{Int64}(1,2,3,4)
 
 # Add more values to a set
 push!(filled_set,5) # => Set{Int64}(5,4,2,3,1)
@@ -302,7 +302,7 @@ in(2, filled_set) # => true
 in(10, filled_set) # => false
 
 # There are functions for set intersection, union, and difference.
-other_set = Set(3, 4, 5, 6) # => Set{Int64}(6,4,5,3)
+other_set = Set([3, 4, 5, 6]) # => Set{Int64}(6,4,5,3)
 intersect(filled_set, other_set) # => Set{Int64}(3,4,5)
 union(filled_set, other_set) # => Set{Int64}(1,2,3,4,5,6)
 setdiff(Set(1,2,3,4),Set(2,3,5)) # => Set{Int64}(1,4)
@@ -420,14 +420,12 @@ varargs(1,2,3) # => (1,2,3)
 
 # The ... is called a splat.
 # We just used it in a function definition.
-# It can also be used in a fuction call,
+# It can also be used in a function call,
 # where it will splat an Array or Tuple's contents into the argument list.
-Set([1,2,3])    # => Set{Array{Int64,1}}([1,2,3]) # produces a Set of Arrays
-Set([1,2,3]...) # => Set{Int64}(1,2,3) # this is equivalent to Set(1,2,3)
+add([5,6]...) # this is equivalent to add(5,6)
 
-x = (1,2,3)     # => (1,2,3)
-Set(x)          # => Set{(Int64,Int64,Int64)}((1,2,3)) # a Set of Tuples
-Set(x...)       # => Set{Int64}(2,3,1)
+x = (5,6)     # => (5,6)
+add(x...)     # this is equivalent to add(5,6)
 
 
 # You can define functions with optional positional arguments
@@ -549,12 +547,8 @@ abstract Cat # just a name and point in the type hierarchy
 
 # Abstract types cannot be instantiated, but can have subtypes.
 # For example, Number is an abstract type
-subtypes(Number) # => 6-element Array{Any,1}:
-                 #     Complex{Float16}
-                 #     Complex{Float32}
-                 #     Complex{Float64}
+subtypes(Number) # => 2-element Array{Any,1}:
                  #     Complex{T<:Real}
-                 #     ImaginaryUnit
                  #     Real
 subtypes(Cat) # => 0-element Array{Any,1}
 
@@ -572,10 +566,11 @@ subtypes(AbstractString)    # 8-element Array{Any,1}:
 # Every type has a super type; use the `super` function to get it.
 typeof(5) # => Int64
 super(Int64) # => Signed
-super(Signed) # => Real
+super(Signed) # => Integer
+super(Integer) # => Real
 super(Real) # => Number
 super(Number) # => Any
-super(super(Signed)) # => Number
+super(super(Signed)) # => Real
 super(Any) # => Any
 # All of these type, except for Int64, are abstract.
 typeof("fire") # => ASCIIString
diff --git a/ko-kr/erlang-kr.html.markdown b/ko-kr/erlang-kr.html.markdown
new file mode 100644
index 00000000..b0b1dd2a
--- /dev/null
+++ b/ko-kr/erlang-kr.html.markdown
@@ -0,0 +1,333 @@
+---
+language: erlang
+contributors:
+    - ["Giovanni Cappellotto", "http://www.focustheweb.com/"]
+filename: learnerlang-kr.erl
+translators:
+    - ["Taesung Jung", "https://github.com/tsj"]
+lang: ko-kr
+---
+
+```erlang
+% 퍼센트 기호는 한 줄 주석을 시작한다.
+
+%% 두 개의 퍼센트 문자는 함수의 주석에 사용된다.
+
+%%% 세 개의 퍼센트 문자는 모듈의 주석에 사용된다.
+
+% Erlang에선 3가지 유형의 문장 부호를 사용한다.
+% 쉼표(`,`)는 함수 호출에서 인수, 데이터 생성자(constructors), 패턴을 구분한다.
+% 마침표(`.`)(다음에 오는 공백)는 셸에서 함수 전체와 식을 구분한다.
+% 세미콜론(`;`)은 절을 구분한다. 몇 가지 문맥(contexts)에서 절이 발견된다:
+% 함수 정의와 `case`, `if`, `try..catch`, 그리고 `receive` 식
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% 1. 변수와 패턴 매칭
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Erlang에서 새로운 변수는 `=` 문장에 의해 바인딩 된다.
+Num = 42.  % 모든 변수 이름은 반드시 대문자로 시작해야 한다.
+
+% Erlang은 단일 할당 변수(single-assignment variables)를 가진다;
+% 만약 다른 값을 `Num` 변수에 할당하려고 시도하면 오류가 발생한다.
+Num = 43. % ** 예외 오류: 우변의 값 43과 매칭되지 않음
+
+% 대부분 언어에서 `=`는 할당문을 나타낸다. 그러나 Erlang에서 
+% `=`는 패턴 매칭 연산자를 나타낸다. 비어 있는 변수가 `=` 연산자의 좌변에
+% 사용되면 바인드(할당) 된다, 그러나 바인드 변수가 좌변에 사용된 경우에
+% 다음 행동은 그 바인드 변수가 관측된다.
+% `Lhs = Rhs`의 진짜 의미: 우변(`Rhs`)을 평가하고, 그리고
+% 그 결과를 좌변(`Lhs`)의 패턴과 매치시켜라.
+Num = 7 * 6.
+
+% 부동 소수점 수.
+Pi = 3.14159.
+
+% Atom은 숫자가 아닌 서로 다른 상숫값을 표현하는 데 사용한다. Atom은
+% 소문자로 시작하고, 연속적인 영숫자(alphanumeric) 문자나 밑줄(`_`) 또는
+% 골뱅이(`@`) 기호가 따라온다.
+Hello = hello.
+OtherNode = example@node.
+
+% 영숫자 값이 아닌 Atom은 작은따옴표로 묶여서 작성될 수 있다.
+AtomWithSpace = 'some atom with space'.
+
+% Tuple은 C의 struct와 비슷하다.
+Point = {point, 10, 45}.
+
+% Tuple에서 어떤 값을 추출하려면, 패턴 매칭 연산자 `=`를 사용한다.
+{point, X, Y} = Point.  % X = 10, Y = 45
+
+% 관심 없는 변수를 위해 자리 표시자(placeholder) `_`를 사용할 수 있다.
+% 기호 `_`는 익명 변수(anonymous variable)라 부른다. 일반적인 변수들과
+% 다르게 같은 패턴에서 여러 번 나오더라도 동일한 값으로 바인드되지 않아도 된다.
+Person = {person, {name, {first, joe}, {last, armstrong}}, {footsize, 42}}.
+{_, {_, {_, Who}, _}, _} = Person.  % Who = joe
+
+% List를 만들기 위해서 List의 원소는 대괄호([])로 둘러싸고 쉼표(,)로 구분한다.
+% List의 각각의 원소는 어떤 타입도 가능하다.
+% List의 첫 번째 원소는 List의 HEAD이다. 만약 List의 HEAD를 제거하면,
+% 남은 부분은 List의 TAIL이라 부른다.
+ThingsToBuy = [{apples, 10}, {pears, 6}, {milk, 3}].
+
+% 만약 `T`가 List이면, `[H|T]`도 HEAD가 `H`이고 TAIL이 `T`인 List이다.
+% 세로 막대(`|`)는 List의 HEAD와 TAIL을 분리한다. `[]`는 빈 List다.
+% List의 원소들은 패턴 매칭 연산으로 추출할 수 있다.
+% 만약 비어있지 않은 List `L`이 있을 때, `[X|Y] = L` 식의 `X`와 `Y`가
+% 바인드되지 않은 변수이면, List의 HEAD는 X에 그리고 TAIL은 Y로 추출된다.
+[FirstThing|OtherThingsToBuy] = ThingsToBuy.
+% FirstThing = {apples, 10}
+% OtherThingsToBuy = [{pears, 6}, {milk, 3}]
+
+% Erlang에는 문자열(String)이 없다. 문자열은 사실 정수의 List일 뿐이다.
+% 문자열은 큰따옴표(`"`)로 묶인다.
+Name = "Hello".
+[72, 101, 108, 108, 111] = "Hello".
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% 2. 순차 프로그래밍
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Erlang에서 Module은 코드의 기본 단위이다. 우리가 작성한 모든 함수는
+% Module에 담긴다. Module은 확장자가 `.erl`인 파일에 저장된다.
+% 코드가 실행되기 전에 Module은 컴파일되어야 한다. 컴파일된 Module은
+% `.beam` 확장자를 가진다.
+-module(geometry).
+-export([area/1]). % Module로부터 내보내진(exported) 함수의 List
+
+% 함수 `area`는 두 개의 절로 구성된다. 절은 세미콜론(`;`)으로 구분되며,
+% 마지막 절은 마침표-공백(dot-whitespace)으로 끝난다.
+% 각 절은 서문(head)과 본문(body)을 가진다. 서문은 함수의 이름에 이어서
+% 패턴이(괄호 속에) 따라온다. 본문은 연속적인 식으로 구성되고,
+% 연속적인 식은 서문의 패턴과 호출한 인수가 성공적으로 매치되면 평가된다.
+% 패턴은 함수 정의가 나타나는 순서대로 매치된다.
+area({rectangle, Width, Ht}) -> Width * Ht;
+area({circle, R})            -> 3.14159 * R * R.
+
+% geometry.erl 파일의 코드 컴파일
+c(geometry).  % {ok,geometry}
+
+% 호출하려는 함수를 정확히 알아내기 위해 함수 이름을 Module 이름과 함께
+% 명시하는 것이 필요하다.
+geometry:area({rectangle, 10, 5}).  % 50
+geometry:area({circle, 1.4}).  % 6.15752
+
+% Erlang에서, 같은 Module에 이름이 같고 Arity(인수의 갯수)가 다른
+% 두 함수는 전혀 다른 함수를 나타낸다.
+-module(lib_misc).
+-export([sum/1]). % Arity가 1인 내보내진(export) 함수 `sum`
+                  % 하나의 인수만 받음: 정수의 List
+sum(L) -> sum(L, 0).
+sum([], N)    -> N;
+sum([H|T], N) -> sum(T, H+N).
+
+% Fun은 "익명(anonymous)" 함수다. 이름이 없어서 이렇게 부른다.
+% 그러나, 변수에 할당될 수 있다.
+Double = fun(X) -> 2 * X end. % `Double`은 익명 함수를 가리킨다:
+                              % #Fun<erl_eval.6.17052888>
+Double(2).  % 4
+
+% 함수는 인수로 Fun을 받거나, Fun을 반환할 수 있다.
+Mult = fun(Times) -> ( fun(X) -> X * Times end ) end.
+Triple = Mult(3).
+Triple(5).  % 15
+
+% List 해석(List comprehensions)은 Fun, Map, Filter 없이 List를 만드는 식이다.
+% 표기법 `[F(X) || X <- L]`은 `F(X)`의 List라는 의미이다.
+% 이때 `X`는 List `L`로부터 가져온다.
+L = [1,2,3,4,5].
+[2 * X || X <- L].  % [2,4,6,8,10]
+% List 해석은 Generator와 생성된 값들의 부분 집합을 선택하는 Filter를 가질 수 있다.
+EvenNumbers = [N || N <- [1, 2, 3, 4], N rem 2 == 0]. % [2, 4]
+
+% Guard는 패턴 매칭의 능력을 향상시키는데 사용할 수 있는 구조다.
+% Guard를 사용하면, 패턴에 있는 변수에 대해 간단한 검사와 비교를 수행할 수 있다.
+% 함수 정의의 서문(head)에 `when` 키워드로 시작되는 Guard를 사용할 수도 있고,
+% 또는 식이 허용되는 언어의 어떤 곳에도 사용될 수 있다.
+max(X, Y) when X > Y -> X;
+max(X, Y) -> Y.
+
+% Guard는 쉼표(`,`)로 구분된 연속된 Guard 식이다.
+% 모든 Guard 식 `GuardExpr1`, `GuardExpr2`, ..., `GuardExprN`이
+% `true`로 평가된다면, Guard `GuardExpr1`, `GuardExpr2`, ..., `GuardExprN`는
+% 참이다.
+is_cat(A) when is_atom(A), A =:= cat -> true;
+is_cat(A) -> false.
+is_dog(A) when is_atom(A), A =:= dog -> true;
+is_dog(A) -> false.
+
+% `=:=` 연산자는 여기서 자세히 다루지 않을 것이다; 두 개의 Erlang 식의 값이 같고
+% *그리고* 같은 타입인지 검사하는 데 사용된다고만 알면 된다.
+% `==` 연산자의 작동과 대조할 것:
+1 + 2 =:= 3.   % true
+1 + 2 =:= 3.0. % false
+1 + 2 ==  3.0. % true
+
+% 연속적인 Guard는 단일 Guard 또는 세미콜론(`;`)으로 구분된 연속된 Guard다.
+% Guard `G1; G2; ...; Gn` 중에 적어도 하나의 Guard가 `true`로 평가된다면,
+% 연속적인 Guard `G1; G2; ...; Gn`는 참이다.
+is_pet(A) when is_atom(A), (A =:= dog);(A =:= cat) -> true;
+is_pet(A)                                          -> false.
+
+% 주의: 모든 유효한 Erlang 식이 Guard 식으로 사용될 수 있는 것은 아니다;
+% 특히, 함수 `is_cat`과 `is_dog`는 `is_pet`의 정의 안에 있는 
+% 연속적인 Guard 사이에 사용될 수 없다.
+% 연속적인 Guard에 허용되는 식의 자세한 설명은 Erlang 레퍼런스 메뉴얼
+% [section](http://erlang.org/doc/reference_manual/expressions.html#id81912)
+% 을 참조하라.
+
+% Record는 Tuple 안에 이름과 특정 요소를 연결하는 방법을 제공한다.
+% Record 정의는 Erlang 소스 코드 파일에 포함되거나 Erlang 소스 코드 파일에
+% 포함될 수 있는 확장자가 `.hrl`인 파일에 집어넣을 수 있다.
+-record(todo, {
+  status = reminder,  % 기본 값
+  who = joe,
+  text
+}).
+
+% Record를 사용할 수 있기 전에 Record 정의를 반드시 셸로 읽어 들여야 한다.
+% 셸로 읽어 들이기 위해 셸 함수 `rr`(read records의 약자)을 사용한다.
+rr("records.hrl").  % [todo]
+
+% Record 생성과 수정
+X = #todo{}.
+% #todo{status = reminder, who = joe, text = undefined}
+X1 = #todo{status = urgent, text = "Fix errata in book"}.
+% #todo{status = urgent, who = joe, text = "Fix errata in book"}
+X2 = X1#todo{status = done}.
+% #todo{status = done, who = joe, text = "Fix errata in book"}
+
+% `case` 식
+% `filter`는 List `L`의 원소 `X` 중에서 `P(X)`가 참인 모든 `X`의 List를 반환한다.
+filter(P, [H|T]) ->
+  case P(H) of
+    true -> [H|filter(P, T)];
+    false -> filter(P, T)
+  end;
+filter(P, []) -> [].
+filter(fun(X) -> X rem 2 == 0 end, [1, 2, 3, 4]). % [2, 4]
+
+% `if` 식.
+max(X, Y) ->
+  if
+    X > Y -> X;
+    X < Y -> Y;
+    true -> nil
+  end.
+
+% 주의: 적어도 if 식의 Guard 중의 하나는 반드시 `true`로 평가되어야 한다. 
+% 그렇지 않으면 예외가 발생한다.
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% 3. 예외
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% 예외는 내부에 에러가 생겼거나 명시적으로 `throw(Exception)`,
+% `exit(Exception)` 또는 `erlang:error(Exception)`를 호출하면
+% 시스템에 의해 발생한다.
+generate_exception(1) -> a;
+generate_exception(2) -> throw(a);
+generate_exception(3) -> exit(a);
+generate_exception(4) -> {'EXIT', a};
+generate_exception(5) -> erlang:error(a).
+
+% Erlang은 예외를 잡는 두 가지 방법을 가지고 있다. 한 가지는
+% 예외를 발생시키는 함수의 호출 부분을 `try...catch` 식으로 감싸는 것이다.
+catcher(N) ->
+  try generate_exception(N) of
+    Val -> {N, normal, Val}
+  catch
+    throw:X -> {N, caught, thrown, X};
+    exit:X -> {N, caught, exited, X};
+    error:X -> {N, caught, error, X}
+  end.
+
+% 다른 방법은 그 호출 부분을 `catch` 식으로 감싸는 것이다.
+% 예외를 잡았을 때, 그 예외는 오류를 설명하는 Tuple로 변환된다.
+catcher(N) -> catch generate_exception(N).
+
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% 4. 병행성
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Erlang은 병행성을 위해 Actor 모델을 사용한다. Erlang에서 병행 프로그램을
+% 작성하는 데 필요한 모든 것은 3가지 기본 형식(primitivies)이다:
+% 프로세스 생성, 메시지 보내기, 메시지 받기
+
+% 새로운 프로세스를 시작하기 위해, 함수를 인수로 받는 `spawn` 함수를 사용한다.
+
+F = fun() -> 2 + 2 end. % #Fun<erl_eval.20.67289768>
+spawn(F). % <0.44.0>
+
+% `spawn`은 pid(프로세스 식별자)를 반환한다. 이 pid를 프로세스로
+% 메시지를 보내는 데 사용할 수 있다. 메시지 전달을 위해, `!` 연산자를 사용한다.
+% 위의 기능이 유용하려면, 메시지를 받을 수 있어야 한다. 메시지를 받는 것은
+% `receive` 메커니즘을 사용한다.
+
+-module(calculateGeometry).
+-compile(export_all).
+calculateArea() ->
+    receive
+      {rectangle, W, H} ->
+        W * H;
+      {circle, R} ->
+        3.14 * R * R;
+      _ ->
+        io:format("We can only calculate area of rectangles or circles.")
+    end.
+
+% Module을 컴파일하고 셸에서 `calculateArea`를 평가한 프로세스를 생성한다.
+c(calculateGeometry).
+CalculateArea = spawn(calculateGeometry, calculateArea, []).
+CalculateArea ! {circle, 2}. % 12.56000000000000049738
+
+% 셸도 마찬가지로 프로세스이다. 현재 pid를 얻기 위해서 `self`를 사용할 수 있다.
+self(). % <0.41.0>
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% 5. EUnit과 테스트
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% EUnit의 테스트 생성기(generators)와 assert 매크로를 이용해
+% 단위 테스트를 작성할 수 있다.
+-module(fib).
+-export([fib/1]).
+-include_lib("eunit/include/eunit.hrl").
+
+fib(0) -> 1;
+fib(1) -> 1;
+fib(N) when N > 1 -> fib(N-1) + fib(N-2).
+
+fib_test_() ->
+    [?_assert(fib(0) =:= 1),
+     ?_assert(fib(1) =:= 1),
+     ?_assert(fib(2) =:= 2),
+     ?_assert(fib(3) =:= 3),
+     ?_assert(fib(4) =:= 5),
+     ?_assert(fib(5) =:= 8),
+     ?_assertException(error, function_clause, fib(-1)),
+     ?_assert(fib(31) =:= 2178309)
+    ].
+
+% EUnit은 Erlang 셸에서 테스트를 실행할 수 있게 
+% 자동으로 test() 함수를 내보낸다(export).
+fib:test()
+
+% Erlang의 유명한 빌드 툴인 Rebar는 EUnit과 호환된다.
+% ```
+% rebar eunit
+% ```
+
+```
+
+## 참조
+
+* ["Learn You Some Erlang for great good!"](http://learnyousomeerlang.com/)
+* ["Programming Erlang: Software for a Concurrent World" by Joe Armstrong](http://pragprog.com/book/jaerlang/programming-erlang)
+* [조 암스트롱, 김석준 역, "프로그래밍 얼랭: Software for a Concurrent World", 인사이트](http://ebook.insightbook.co.kr/book/23)
+* [Erlang/OTP Reference Documentation](http://www.erlang.org/doc/)
+* [Erlang - Programming Rules and Conventions](http://www.erlang.se/doc/programming_rules.shtml)
diff --git a/ko-kr/lua-kr.html.markdown b/ko-kr/lua-kr.html.markdown
index b4a018ef..ce3b71cb 100644
--- a/ko-kr/lua-kr.html.markdown
+++ b/ko-kr/lua-kr.html.markdown
@@ -418,5 +418,5 @@ lua-users.org에 있는 <a href="http://lua-users.org/files/wiki_insecure/users/
 learn.lua로 저장한 후 "lua learn.lua"를 실행해 보세요!
 
 이 글은 tylerneylon.com에 처음으로 써본 글이며, 
-<a href="https://gist.github.com/tylerneylon/5853042">Github의 Gist</a>에서도 확인할 수 있습니다.
+<a href="https://gist.github.com/tylerneylon/5853042">GitHub의 Gist</a>에서도 확인할 수 있습니다.
 루아로 즐거운 시간을 보내세요!
diff --git a/kotlin.html.markdown b/kotlin.html.markdown
new file mode 100644
index 00000000..ae0123a7
--- /dev/null
+++ b/kotlin.html.markdown
@@ -0,0 +1,321 @@
+---
+language: kotlin
+contributors:
+    - ["S Webber", "https://github.com/s-webber"]
+filename: LearnKotlin.kt
+---
+
+Kotlin is a Statically typed programming language for the JVM, Android and the
+browser. It is 100% interoperable with Java.
+[Read more here.](https://kotlinlang.org/)
+
+```kotlin
+// Single-line comments start with //
+/*
+Multi-line comments look like this.
+*/
+
+// The "package" keyword works in the same way as in Java.
+package com.learnxinyminutes.kotlin
+
+/*
+The entry point to a Kotlin program is a function named "main".
+The function is passed an array containing any command line arguments.
+*/
+fun main(args: Array<String>) {
+    /*
+    Declaring values is done using either "var" or "val".
+    "val" declarations cannot be reassigned, whereas "vars" can.
+    */
+    val fooVal = 10 // we cannot later reassign fooVal to something else
+    var fooVar = 10
+    fooVar = 20 // fooVar can be reassigned
+
+    /*
+    In most cases, Kotlin can determine what the type of a variable is,
+    so we don't have to explicitly specify it every time.
+    We can explicitly declare the type of a variable like so:
+    */
+    val foo : Int = 7
+
+    /*
+    Strings can be represented in a similar way as in Java.
+    Escaping is done with a backslash.
+    */
+    val fooString = "My String Is Here!";
+    val barString = "Printing on a new line?\nNo Problem!";
+    val bazString = "Do you want to add a tab?\tNo Problem!";
+    println(fooString);
+    println(barString);
+    println(bazString);
+
+    /*
+    A raw string is delimited by a triple quote (""").
+    Raw strings can contain newlines and any other characters.
+    */
+    val fooRawString = """
+fun helloWorld(val name : String) {
+   println("Hello, world!")
+}
+"""
+    println(fooRawString)
+
+    /*
+    Strings can contain template expressions.
+    A template expression starts with a dollar sign ($).
+    */
+    val fooTemplateString = "$fooString has ${fooString.length} characters"
+    println(fooTemplateString)
+
+    /*
+    For a variable to hold null it must be explicitly specified as nullable.
+    A variable can be specified as nullable by appending a ? to its type.
+    We can access a nullable variable by using the ?. operator.
+    We can use the ?: operator to specify an alternative value to use
+    if a variable is null
+    */
+    var fooNullable: String? = "abc"
+    println(fooNullable?.length) // => 3
+    println(fooNullable?.length ?: -1) // => 3
+    fooNullable = null
+    println(fooNullable?.length) // => null
+    println(fooNullable?.length ?: -1) // => -1
+
+    /*
+    Functions can be declared using the "fun" keyword.
+    Function arguments are specified in brackets after the function name.
+    Function arguments can optionally have a default value.
+    The function return type, if required, is specified after the arguments.
+    */
+    fun hello(name: String = "world") : String {
+        return "Hello, $name!"
+    }
+    println(hello("foo")) // => Hello, foo!
+    println(hello(name = "bar")) // => Hello, bar!
+    println(hello()) // => Hello, world!
+
+    /*
+    A function parameter may be marked with the "vararg" keyword
+    to allow a variable number of arguments to be passed to the function.
+    */
+    fun varargExample(vararg names: Int) {
+        println("Argument has ${names.size} elements")
+    }
+    varargExample() // => Argument has 0 elements
+    varargExample(1) // => Argument has 1 elements
+    varargExample(1, 2, 3) // => Argument has 3 elements
+
+    /*
+    When a function consists of a single expression then the curly brackets can
+    be omitted. The body is specified after a = symbol.
+    */
+    fun odd(x: Int): Boolean = x % 2 == 1
+    println(odd(6)) // => false
+    println(odd(7)) // => true
+
+    // If the return type can be inferred then we don't need to specify it.
+    fun even(x: Int) = x % 2 == 0
+    println(even(6)) // => true
+    println(even(7)) // => false
+
+    // Functions can take functions as arguments and return functions.
+    fun not(f: (Int) -> Boolean) : (Int) -> Boolean {
+        return {n -> !f.invoke(n)}
+    }
+    // Named functions can be specified as arguments using the :: operator.
+    val notOdd = not(::odd)
+    val notEven = not(::even)
+    // Anonymous functions can be specified as arguments.
+    val notZero = not {n -> n == 0}
+    /*
+    If an anonymous function has only one parameter
+    then its declaration can be omitted (along with the ->).
+    The name of the single parameter will be "it".
+    */
+    val notPositive = not {it > 0}
+    for (i in (0..4)) {
+        println("${notOdd(i)} ${notEven(i)} ${notZero(i)} ${notPositive(i)}")
+    }
+
+    //The "class" keyword is used to declare classes.
+    class ExampleClass(val x: Int) {
+        fun memberFunction(y: Int) : Int {
+            return x + y
+        }
+
+        infix fun infixMemberFunction(y: Int) : Int {
+            return x * y
+        }
+    }
+    /*
+    To create a new instance we call the constructor.
+    Note that Kotlin does not have a "new" keyword.
+    */
+    val fooExampleClass = ExampleClass(7)
+    // Member functions can be called using dot notation.
+    println(fooExampleClass.memberFunction(4)) // => 11
+    /*
+    If a function has been marked with the "infix" keyword then it can be
+    called using infix notation.
+    */
+    println(fooExampleClass infixMemberFunction 4) // => 28
+
+    /*
+    Data classes are a concise way to create classes that just hold data.
+    The "hashCode"/"equals" and "toString" methods are automatically generated.
+    */
+    data class DataClassExample (val x: Int, val y: Int, val z: Int)
+    val fooData = DataClassExample(1, 2, 4)
+    println(fooData) // => DataClassExample(x=1, y=2, z=4)
+
+    // Data classes have a "copy" function.
+    val fooCopy = fooData.copy(y = 100)
+    println(fooCopy) // => DataClassExample(x=1, y=100, z=4)
+
+    // Objects can be destructured into multiple variables.
+    val (a, b, c) = fooCopy
+    println("$a $b $c") // => 1 100 4
+
+    // The "with" function is similar to the JavaScript "with" statement.
+    data class MutableDataClassExample (var x: Int, var y: Int, var z: Int)
+    val fooMutableDate = MutableDataClassExample(7, 4, 9)
+    with (fooMutableDate) {
+        x -= 2
+        y += 2
+        z--
+    }
+    println(fooMutableDate) // => MutableDataClassExample(x=5, y=6, z=8)
+
+    /*
+    We can create a list using the "listOf" function.
+    The list will be immutable - elements cannot be added or removed.
+    */
+    val fooList = listOf("a", "b", "c")
+    println(fooList.size) // => 3
+    println(fooList.first()) // => a
+    println(fooList.last()) // => c
+    // elements can be accessed by index
+    println(fooList[1]) // => b
+
+    // A mutable list can be created using the "mutableListOf" function.
+    val fooMutableList = mutableListOf("a", "b", "c")
+    fooMutableList.add("d")
+    println(fooMutableList.last()) // => d
+    println(fooMutableList.size) // => 4
+
+    // We can create a set using the "setOf" function.
+    val fooSet = setOf("a", "b", "c")
+    println(fooSet.contains("a")) // => true
+    println(fooSet.contains("z")) // => false
+
+    // We can create a map using the "mapOf" function.
+    val fooMap = mapOf("a" to 8, "b" to 7, "c" to 9)
+    // Map values can be accessed by their key.
+    println(fooMap["a"]) // => 8
+
+    // Kotlin provides higher-order functions for working with collections.
+    val x = (1..9).map {it * 3}
+                  .filter {it < 20}
+                  .groupBy {it % 2 == 0}
+                  .mapKeys {if (it.key) "even" else "odd"}
+    println(x) // => {odd=[3, 9, 15], even=[6, 12, 18]}
+
+    // A "for" loop can be used with anything that provides an iterator.
+    for (c in "hello") {
+        println(c)
+    }
+
+    // "while" loops work in the same way as other languages.
+    var ctr = 0
+    while (ctr < 5) {
+        println(ctr)
+        ctr++
+    }
+    do {
+        println(ctr)
+        ctr++
+    } while (ctr < 10)
+
+    // "when" can be used as an alternative to "if-else if" chains.
+    val i = 10
+    when {
+        i < 7 -> println("first block")
+        fooString.startsWith("hello") -> println("second block")
+        else -> println("else block")
+    }
+
+    // "when" can be used with an argument.
+    when (i) {
+        0, 21 -> println("0 or 21")
+        in 1..20 -> println("in the range 1 to 20")
+        else -> println("none of the above")
+    }
+
+    // "when" can be used as a function that returns a value.
+    var result = when (i) {
+        0, 21 -> "0 or 21"
+        in 1..20 -> "in the range 1 to 20"
+        else -> "none of the above"
+    }
+    println(result)
+
+    /*
+    We can check if an object is a particular type by using the "is" operator.
+    If an object passes a type check then it can be used as that type without
+    explicitly casting it.
+    */
+    fun smartCastExample(x: Any) : Boolean {
+        if (x is Boolean) {
+            // x is automatically cast to Boolean
+            return x
+        } else if (x is Int) {
+            // x is automatically cast to Int
+            return x > 0
+        } else if (x is String) {
+            // x is automatically cast to String
+            return x.isNotEmpty()
+        } else {
+            return false
+        }
+    }
+    println(smartCastExample("Hello, world!")) // => true
+    println(smartCastExample("")) // => false
+    println(smartCastExample(5)) // => true
+    println(smartCastExample(0)) // => false
+    println(smartCastExample(true)) // => true
+
+    /*
+    Extensions are a way to add new functionality to a class.
+    This is similar to C# extension methods.
+    */
+    fun String.remove(c: Char): String {
+        return this.filter {it != c}
+    }
+    println("Hello, world!".remove('l')) // => Heo, word!
+
+    println(EnumExample.A) // => A
+    println(ObjectExample.hello()) // => hello
+}
+
+// Enum classes are similar to Java enum types.
+enum class EnumExample {
+    A, B, C
+}
+
+/*
+The "object" keyword can be used to create singleton objects.
+We cannot assign it to a variable, but we can refer to it by its name.
+This is similar to Scala singleton objects.
+*/
+object ObjectExample {
+    fun hello() : String {
+        return "hello"
+    }
+}
+
+```
+
+### Further Reading
+
+A web-based mini-IDE for Kotlin:
+[http://try.kotlinlang.org/)
diff --git a/less.html.markdown b/less.html.markdown
index 7195271e..a1018ca3 100644
--- a/less.html.markdown
+++ b/less.html.markdown
@@ -89,7 +89,7 @@ div {
 	background-color: #A3A4FF;
 }
 
-/* You can omit the mixin code from being compiled by adding paranthesis
+/* You can omit the mixin code from being compiled by adding parenthesis
    after the selector */
 
 .center() {
diff --git a/make.html.markdown b/make.html.markdown
index bf934c58..ab128475 100644
--- a/make.html.markdown
+++ b/make.html.markdown
@@ -9,16 +9,16 @@ A Makefile defines a graph of rules for creating a target (or targets).
 Its purpose is to do the minimum amount of work needed to update a

 target to the most recent version of the source. Famously written over a

 weekend by Stuart Feldman in 1976, it is still widely used (particularly

-on Unix) despite many competitors and criticisms.

+on Unix and Linux) despite many competitors and criticisms.

 

-There are many varieties of make in existence, this article assumes that

-we are using GNU make which is the standard on Linux.

+There are many varieties of make in existence, however this article 

+assumes that we are using GNU make which is the standard on Linux.

 

 ```make

 

 # Comments can be written like this.

 

-# Files should be named Makefile and then be can run as `make <target>`.

+# File should be named Makefile and then can be run as `make <target>`.

 # Otherwise we use `make -f "filename" <target>`.

 

 # Warning - only use TABS to indent in Makefiles, never spaces!

@@ -27,13 +27,16 @@ we are using GNU make which is the standard on Linux.
 # Basics

 #-----------------------------------------------------------------------

 

+# Rules are of the format

+# target: <prerequisite>

+# where prerequisites are optional.

+

 # A rule - this rule will only run if file0.txt doesn't exist.

 file0.txt:

 	echo "foo" > file0.txt

 	# Even comments in these 'recipe' sections get passed to the shell.

 	# Try `make file0.txt` or simply `make` - first rule is the default.

 

-

 # This rule will only run if file0.txt is newer than file1.txt.

 file1.txt: file0.txt

 	cat file0.txt > file1.txt

@@ -99,8 +102,8 @@ process: ex1.txt file0.txt
 %.png: %.svg

 	inkscape --export-png $^

 

-# Pattern rules will only do anything if make decides to create the \

-target.

+# Pattern rules will only do anything if make decides to create the

+# target.

 

 # Directory paths are normally ignored when matching pattern rules. But

 # make will try to use the most appropriate rule available.

@@ -145,11 +148,11 @@ echo:
 # In order of priority from highest to lowest:

 # 1: commandline arguments

 # 2: Makefile

-# 3: shell enviroment variables - make imports these automatically.

+# 3: shell environment variables - make imports these automatically.

 # 4: make has some predefined variables

 

 name4 ?= Jean

-# Only set the variable if enviroment variable is not already defined.

+# Only set the variable if environment variable is not already defined.

 

 override name5 = David

 # Stops commandline arguments from changing this variable.

@@ -185,7 +188,7 @@ var := hello
 var2 ::=  $(var) hello

 #:= and ::= are equivalent.

 

-# These variables are evaluated procedurely (in the order that they

+# These variables are evaluated procedurally (in the order that they

 # appear), thus breaking with the rest of the language !

 

 # This doesn't work

diff --git a/markdown.html.markdown b/markdown.html.markdown
index 05eeecbe..b4ad3202 100644
--- a/markdown.html.markdown
+++ b/markdown.html.markdown
@@ -72,8 +72,8 @@ __And so is this text.__
 *__And this!__*
 ```
 
-In Github Flavored Markdown, which is used to render markdown files on
-Github, we also have strikethrough:
+In GitHub Flavored Markdown, which is used to render markdown files on
+GitHub, we also have strikethrough:
 
 ```markdown
 ~~This text is rendered with strikethrough.~~
@@ -200,7 +200,7 @@ Inline code can be created using the backtick character `
 John didn't even know what the `go_to()` function did!
 ```
 
-In Github Flavored Markdown, you can use a special syntax for code
+In GitHub Flavored Markdown, you can use a special syntax for code
 
 <pre>
 <code class="highlight">&#x60;&#x60;&#x60;ruby
@@ -209,7 +209,7 @@ def foobar
 end
 &#x60;&#x60;&#x60;</code></pre>
 
-The above text doesn't require indenting, plus Github will use syntax
+The above text doesn't require indenting, plus GitHub will use syntax
 highlighting of the language you specify after the \`\`\`
 
 ## Horizontal rule
@@ -298,7 +298,7 @@ in italics, so I do this: \*this text surrounded by asterisks\*.
 
 ### Keyboard keys
 
-In Github Flavored Markdown, you can use a `<kbd>` tag to represent keyboard keys.
+In GitHub Flavored Markdown, you can use a `<kbd>` tag to represent keyboard keys.
 
 ```markdown
 Your computer crashed? Try sending a
@@ -306,7 +306,7 @@ Your computer crashed? Try sending a
 ```
 ### Tables
 
-Tables are only available in Github Flavored Markdown and are slightly
+Tables are only available in GitHub Flavored Markdown and are slightly
 cumbersome, but if you really want it:
 
 ```markdown
diff --git a/ms-my/bash-my.html.markdown b/ms-my/bash-my.html.markdown
new file mode 100644
index 00000000..e4e55b2c
--- /dev/null
+++ b/ms-my/bash-my.html.markdown
@@ -0,0 +1,284 @@
+---
+category: tool
+tool: bash
+contributors:
+    - ["Max Yankov", "https://github.com/golergka"]
+    - ["Darren Lin", "https://github.com/CogBear"]
+    - ["Alexandre Medeiros", "http://alemedeiros.sdf.org"]
+    - ["Denis Arh", "https://github.com/darh"]
+    - ["akirahirose", "https://twitter.com/akirahirose"]
+    - ["Anton Strömkvist", "http://lutic.org/"]
+    - ["Rahil Momin", "https://github.com/iamrahil"]
+    - ["Gregrory Kielian", "https://github.com/gskielian"]
+    - ["Etan Reisner", "https://github.com/deryni"]
+filename: LearnBash-ms.sh
+translators:
+    - ["hack1m", "https://github.com/hack1m"]
+lang: ms-my   
+---
+
+Bash adalah nama daripada unix shell, yang mana telah diagihkan sebagai shell untuk sistem operasi GNU dan sebagai shell lalai pada Linux dan Mac OS X. Hampir semua contoh di bawah boleh menjadi sebahagian daripada skrip shell atau dijalankan terus dalam shell.
+
+[Baca lebih lanjut di sini.](http://www.gnu.org/software/bash/manual/bashref.html)
+
+```bash
+#!/bin/bash
+# Baris pertama daripada skrip ialah shebang yang mana memberitahu sistem bagaimana untuk melaksana
+# skrip: http://en.wikipedia.org/wiki/Shebang_(Unix)
+# Seperti yang anda sudah gambarkan, komen bermula dengan #. Shebang juga ialah komen.
+
+# Contoh mudah hello world:
+echo Hello world!
+
+# Setiap arahan bermula pada baris baru, atau selepas semikolon:
+echo 'This is the first line'; echo 'This is the second line'
+
+# Mengisytihar pembolehubah kelihatan seperti ini:
+Variable="Some string"
+
+# Tetapi bukan seperti ini:
+Variable = "Some string"
+# Bash akan memutuskan yang pembolehubah adalah arahan ia mesti laksanakan dan memberi ralat
+# kerana ia tidak boleh dijumpai.
+
+# Atau seperti ini:
+Variable= 'Some string'
+# Bash akan memutuskan yang ‘Beberapa rentetan’ adalah arahan ia mesti laksanakan dan memberi
+# ralat kerana ia tidak dijumpai. (Dalam kes ini ‘Variable=' sebahagian dilihat
+# sebagai penetapan pembolehubah sah hanya untuk skop ‘Beberapa rentetan’
+# arahan.)
+
+# Menggunakan pembolehubah:
+echo $Variable
+echo "$Variable"
+echo '$Variable'
+# Apabila anda guna pembolehubah itu sendiri - menetapkan, mengeksport, atau lain-lain - anda menulis
+# nama ia tanpa $. Atau anda ingin menggunakan nilai pembolehubah, anda mesti guna $.
+# Perlu diingatkan ‘(Petikan tunggal) tidak akan memperluaskan pembolehubah!
+
+# Penggantian rentetan dalam pembolehubah
+echo ${Variable/Some/A}
+# Ini akan menukarkan sebutan pertama bagi "Some" dengan "A"
+
+# Subrentetan daripada pembolehubah
+Length=7
+echo ${Variable:0:Length}
+# Ini akan kembalikan hanya 7 aksara pertama pada nilai
+
+# Nilai lalai untuk pembolehubah
+echo ${Foo:-"DefaultValueIfFooIsMissingOrEmpty"}
+# Ini berfungsi untuk null (Foo=) dan rentetan kosong (Foo=“”); sifar (Foo=0) kembali 0.
+# Perlu diingatkan ia hanya kembalikan nilai lalai dan tidak mengubah nilai pembolehubah.
+
+# Pembolehubah terbina:
+# Terdapat beberapa pembolehubah terbina berguna, seperti
+echo "Last program's return value: $?"
+echo "Script's PID: $$"
+echo "Number of arguments passed to script: $#"
+echo "All arguments passed to script: $@"
+echo "Script's arguments separated into different variables: $1 $2..."
+
+# Membaca nilai dari input:
+echo "What's your name?"
+read Name # Perlu diingatkan kita tidak perlu isytihar pembolehubah baru
+echo Hello, $Name!
+
+# Kita ada yang biasa jika struktur:
+# guna 'man test' untuk maklumat lanjut tentang bersyarat
+if [ $Name -ne $USER ]
+then
+    echo "Your name isn't your username"
+else
+    echo "Your name is your username"
+fi
+
+# Terdapat juga pelaksanaan bersyarat
+echo "Always executed" || echo "Only executed if first command fails"
+echo "Always executed" && echo "Only executed if first command does NOT fail"
+
+# Untuk guna && dan || bersama kenyataan ‘if’, anda perlu beberapa pasang daripada tanda kurung siku:
+if [ $Name == "Steve" ] && [ $Age -eq 15 ]
+then
+    echo "This will run if $Name is Steve AND $Age is 15."
+fi
+
+if [ $Name == "Daniya" ] || [ $Name == "Zach" ]
+then
+    echo "This will run if $Name is Daniya OR Zach."
+fi
+
+# Eskspresi ia ditandai dengan format berikut:
+echo $(( 10 + 5 ))
+
+# Tidak seperti bahasa pengaturcaraan lain, bash adalah shell jadi ia berfungsi dalam konteks
+# daripada direktori semasa. Anda boleh menyenaraikan fail dan direktori dalam direktori
+# semasa dengan arahan ini:
+ls
+
+# Arahan ini mempunyai opsyen yang mengawal perlaksanaannya:
+ls -l # Senarai setiap fail dan direktori pada baris yang berbeza
+
+# Keputusan arahan sebelum boleh diberikan kepada arahan selepas sebagai input.
+# arahan grep menapis input dengan memberi paten. Ini bagaimana kita boleh senaraikan
+# fail .txt di dalam direktori semasa:
+ls -l | grep "\.txt"
+
+# Anda boleh mengubah hala arahan input dan output (stdin, stdout, dan stderr).
+# Baca dari stdin sampai ^EOF$ dan menulis ganti hello.py dengan baris
+# antara “EOF":
+cat > hello.py << EOF
+#!/usr/bin/env python
+from __future__ import print_function
+import sys
+print("#stdout", file=sys.stdout)
+print("#stderr", file=sys.stderr)
+for line in sys.stdin:
+    print(line, file=sys.stdout)
+EOF
+
+# Jalankan hello.py dengan pelbagai penghantaran semula stdin, stdout, dan stderr:
+python hello.py < "input.in"
+python hello.py > "output.out"
+python hello.py 2> "error.err"
+python hello.py > "output-and-error.log" 2>&1
+python hello.py > /dev/null 2>&1
+# Output ralat akan menulis ganti fail jika ia wujud,
+# jika anda ingin menambah sebaliknya, guna ‘>>”:
+python hello.py >> "output.out" 2>> "error.err"
+
+# Menulis ganti output.out, menambah ke error.err, dan mengira baris:
+info bash 'Basic Shell Features' 'Redirections' > output.out 2>> error.err
+wc -l output.out error.err
+
+# Jalankan arahan dan cetak fail Deskriptor (e.g. /dev/fd/123)
+# lihat: man fd
+echo <(echo "#helloworld")
+
+# Menulis ganti output.out dengan “#helloworld":
+cat > output.out <(echo "#helloworld")
+echo "#helloworld" > output.out
+echo "#helloworld" | cat > output.out
+echo "#helloworld" | tee output.out >/dev/null
+
+# Membersihkan fail semantara keseluruhan (tambah ‘-i’ untuk interaktif)
+rm -v output.out error.err output-and-error.log
+
+# Arahan boleh digantikan dalam arahan lain menggunakan $():
+# Arahan berikut memaparkan jumlah fail dan direktori dalam
+# direktori semasa.
+echo "There are $(ls | wc -l) items here."
+
+# Perkara yang sama boleh dilakukan dengan menggunakan backticks `` tetapi ia tidak boleh bersarang - cara yang terbaik
+# ialah menggunakan $( ).
+echo "There are `ls | wc -l` items here."
+
+# Bash menggunakan penyataan case yang berfungsi sama seperti ‘switch’ pada Java dan C++:
+case "$Variable" in
+    # Senarai paten untuk syarat yang ada ingin ketemui
+    0) echo "There is a zero.";;
+    1) echo "There is a one.";;
+    *) echo "It is not null.";;
+esac
+
+# ‘for loops iterate' untuk sebanyak mana argumen yang ditetapkan:
+# Kandungan dari $Variable dicetakan sebanyak tiga kali.
+for Variable in {1..3}
+do
+    echo "$Variable"
+done
+
+# Atau tulis ia cara "traditional for loop":
+for ((a=1; a <= 3; a++))
+do
+    echo $a
+done
+
+# Ia juga boleh digunakan untuk bertindak ke atas fail..
+# Ini akan menjalankan arahan 'cat' pada file1 dan file2
+for Variable in file1 file2
+do
+    cat "$Variable"
+done
+
+# ..atau output daripada arahan
+# Ini akan 'cat' output dari ls.
+for Output in $(ls)
+do
+    cat "$Output"
+done
+
+# while loop:
+while [ true ]
+do
+    echo "loop body here..."
+    break
+done
+
+# Anda juga boleh mendefinasikan fungsi
+# Definasi:
+function foo ()
+{
+    echo "Arguments work just like script arguments: $@"
+    echo "And: $1 $2..."
+    echo "This is a function"
+    return 0
+}
+
+# atau lebih mudah
+bar ()
+{
+    echo "Another way to declare functions!"
+    return 0
+}
+
+# Memanggil fungsi
+foo "My name is" $Name
+
+# Terdapat banyak arahan yang berguna yang perlu anda belajar:
+# cetak 10 baris terakhir dalam file.txt
+tail -n 10 file.txt
+# cetak 10 baris pertama dalam file.txt
+head -n 10 file.txt
+# menyusun baris fail.txt
+sort file.txt
+# laporan atau meninggalkan garisan berulang, dengan -d ia melaporkan
+uniq -d file.txt
+# cetak hanya kolum pertama sebelum aksara ','
+cut -d ',' -f 1 file.txt
+# menggantikan setiap kewujudan 'okay' dengan 'great' dalam file.txt, (serasi regex)
+sed -i 's/okay/great/g' file.txt
+# cetak ke stdoout semua baris dalam file.txt yang mana sepadan beberapa regex
+# contoh cetak baris yang mana bermula dengan “foo” dan berakhir dengan “bar”
+grep "^foo.*bar$" file.txt
+# beri opsyen “-c” untuk sebaliknya mencetak jumlah baris sepadan regex
+grep -c "^foo.*bar$" file.txt
+# jika anda secara literal mahu untuk mencari rentetan,
+# dan bukannya regex, guna fgrep (atau grep -F)
+fgrep "^foo.*bar$" file.txt
+
+
+# Baca dokumentasi Bash shell terbina dengan 'help' terbina:
+help
+help help
+help for
+help return
+help source
+help .
+
+# Baca dokumentasi Bash manpage dengan man
+apropos bash
+man 1 bash
+man bash
+
+# Baca dokumentasi info dengan info (? for help)
+apropos info | grep '^info.*('
+man info
+info info
+info 5 info
+
+# Baca dokumentasi bash info:
+info bash
+info bash 'Bash Features'
+info bash 6
+info --apropos bash
+```
diff --git a/ms-my/sass-my.html.markdown b/ms-my/sass-my.html.markdown
new file mode 100644
index 00000000..68ce4ab3
--- /dev/null
+++ b/ms-my/sass-my.html.markdown
@@ -0,0 +1,232 @@
+---
+language: sass
+filename: learnsass-ms.scss
+contributors:
+  - ["Laura Kyle", "https://github.com/LauraNK"]
+translators:
+  - ["hack1m", "https://github.com/hack1m"]
+lang: ms-my
+---
+
+Sass ialah bahasa sambungan CSS yang menambah ciri-ciri seperti pembolehubah, bersarang, mixins dan banyak lagi.
+Sass (dan prapemproses lain, seperti [Less](http://lesscss.org/)) membantu pembangun untuk menulis kod mampu diselenggara dan DRY (Don't Repeat Yourself).
+
+Sass mempunyai dua perbezaan pilihan sintaks untuk dipilih. SCSS, yang mana mempunyai sintaks yang sama seperti CSS tetapi dengan ditambah ciri-ciri Sass. Atau Sass (sintaks asal), yang menggunakan indentasi bukannya tanda kurung dakap dan semikolon.
+Tutorial ini ditulis menggunakan SCSS.
+
+```scss
+
+//Komen baris tunggal dikeluarkan apabila Sass dikompil ke CSS.
+
+/*Komen multi dikekalkan. */
+
+
+
+/*Pembolehubah
+==============================*/
+
+
+
+/* Anda boleh menyimpan nilai CSS (seperti warna) dalam pembolehubah.
+Guna simbol '$' untuk membuat pembolehubah. */
+
+$primary-color: #A3A4FF;
+$secondary-color: #51527F;
+$body-font: 'Roboto', sans-serif;
+
+/* Anda boleh mengguna pembolehubah diseluruh lembaran gaya anda.
+Kini jika anda ingin mengubah warna, anda hanya perlu membuat perubahan sekali.*/
+
+body {
+	background-color: $primary-color;
+	color: $secondary-color;
+	font-family: $body-font;
+}
+
+/* Ia akan dikompil kepada: */
+body {
+	background-color: #A3A4FF;
+	color: #51527F;
+	font-family: 'Roboto', sans-serif;
+}
+
+
+/* Ini jauh lebih mampu diselenggara daripada perlu menukar warna
+setiap yang ada diseluruh lembaran gaya anda. */
+
+
+
+/*Mixins
+==============================*/
+
+
+
+/* Jika anda jumpa yang anda menulis kod yang sama pada lebih dari satu
+elemen, anda mungkin ingin menyimpan kod itu di dalam mixin.
+
+Guna arahan '@mixin', tambah dengan nama untuk mixin anda.*/
+
+@mixin center {
+	display: block;
+	margin-left: auto;
+	margin-right: auto;
+	left: 0;
+	right: 0;
+}
+
+/* Anda boleh guna mixin bersama '@include' dan nama mixin. */
+
+div {
+	@include center;
+	background-color: $primary-color;
+}
+
+/*Ia akan dikompil kepada: */
+div {
+	display: block;
+	margin-left: auto;
+	margin-right: auto;
+	left: 0;
+	right: 0;
+	background-color: #A3A4FF;
+}
+
+
+/* Anda boleh guna mixins untuk membuat singkatan property. */
+
+@mixin size($width, $height) {
+	width: $width;
+	height: $height;
+}
+
+/*Yang mana anda boleh seru dengan memberi argumen lebar dan tinggi. */
+
+.rectangle {
+	@include size(100px, 60px);
+}
+
+.square {
+	@include size(40px, 40px);
+}
+
+/* Ia dikompil kepada: */
+.rectangle {
+  width: 100px;
+  height: 60px;
+}
+
+.square {
+  width: 40px;
+  height: 40px;
+}
+
+
+
+
+/*Extend (Inheritance)
+==============================*/
+
+
+
+/*Extend ialah jalan untuk berkongsi sifat dengan satu pemilih dengan yang lain. */
+
+.display {
+	@include size(5em, 5em);
+	border: 5px solid $secondary-color;
+}
+
+.display-success {
+	@extend .display;
+	border-color: #22df56;
+}
+
+/* Dikompil kepada: */
+.display, .display-success {
+  width: 5em;
+  height: 5em;
+  border: 5px solid #51527F;
+}
+
+.display-success {
+  border-color: #22df56;
+}
+
+
+
+
+/*Bersarang
+==============================*/
+
+
+
+/*Sass membenarkan anda untuk sarangkan pemilih dengan pemilih */
+
+ul {
+	list-style-type: none;
+	margin-top: 2em;
+
+	li {
+		background-color: #FF0000;		
+	}
+}
+
+/* '&' akan digantikan dengan pemilih induk. */
+/* Anda juga boleh sarangkan kelas-pseudo. */
+/* Perlu diingat terlebih bersarang akan membuat kod anda kurang mampu diselenggara.
+Sebagai contoh: */
+
+ul {
+	list-style-type: none;
+	margin-top: 2em;
+
+	li {
+		background-color: red;
+
+		&:hover {
+		  background-color: blue;
+		}
+
+		a {
+		  color: white;
+		}
+	}
+}
+
+/* Dikompil kepada: */
+
+ul {
+  list-style-type: none;
+  margin-top: 2em;
+}
+
+ul li {
+  background-color: red;
+}
+
+ul li:hover {
+  background-color: blue;
+}
+
+ul li a {
+  color: white;
+}
+
+
+
+
+```
+
+
+
+## SASS atau Sass?
+Adakah anda tertanya-tanya sama ada Sass adalah akronim atau tidak? Anda mungkin tidak perlu, tetapi saya akan memberitahu. Nama bahasa ini adalah perkataan, "Sass", dan tidak akronim.
+Kerana orang sentiasa menulis ia sebagai "Sass", pencipta bahasa bergurau memanggilnya "Syntactically Awesome StyleSheets".
+
+## Berlatih Sass
+Jika anda ingin bermain dengan Sass di pelayar anda, lihat [SassMeister](http://sassmeister.com/).
+Anda boleh guna salah satu sintaks, hanya pergi ke tetapan dan pilih sama ada Sass atau SCSS.
+
+
+## Bacaan lanjut
+* [Dokumentasi Rasmi](http://sass-lang.com/documentation/file.SASS_REFERENCE.html)
+* [The Sass Way](http://thesassway.com/) menyediakan tutorial (asas-lanjutan) dan artikel.
diff --git a/ms-my/xml-my.html.markdown b/ms-my/xml-my.html.markdown
new file mode 100644
index 00000000..a9d7509b
--- /dev/null
+++ b/ms-my/xml-my.html.markdown
@@ -0,0 +1,130 @@
+---
+language: xml
+filename: learnxml-ms.xml
+contributors:
+  - ["João Farias", "https://github.com/JoaoGFarias"]
+translators:
+    - ["hack1m", "https://github.com/hack1m"]
+lang: ms-my   
+---
+
+XML adalah bahasa markup direka untuk menyimpan dan mengangkutan data.
+
+Tidak seperti HTML, XML tidak menyatakan bagaimana paparan atau mengformat data, hanya membawanya.
+
+* Sintaks XML
+
+```xml
+<!-- Komen di XML seperti ini -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<bookstore>
+  <book category="COOKING">
+    <title lang="en">Everyday Italian</title>
+    <author>Giada De Laurentiis</author>
+    <year>2005</year>
+    <price>30.00</price>
+  </book>
+  <book category="CHILDREN">
+    <title lang="en">Harry Potter</title>
+    <author>J K. Rowling</author>
+    <year>2005</year>
+    <price>29.99</price>
+  </book>
+  <book category="WEB">
+    <title lang="en">Learning XML</title>
+    <author>Erik T. Ray</author>
+    <year>2003</year>
+    <price>39.95</price>
+  </book>
+</bookstore>
+
+<!-- Di atas adalah fail XML biasa.
+  Ia bermula dengan perisytiharan, memaklumkan beberapa metadata (pilihan).
+
+  XML menggunakan struktur pokok, Di atas, nod akar ialah ‘bookstore’, yang mana mempunyai tiga nod anak, semua ‘books’. Nod itu mempunyai lebih nod anak (atau anak-anak), dan seterusnya…
+
+  Nod dibuat menggunakan tag pembuka/penutup, dan anak-anak hanya nod antara
+  pembuka dan penutup tag.-->
+
+
+  <!-- XML membawa dua jenis data:
+   1 - Atribut -> Iaitu metadata mengenai nod.
+       Biasanya, penghurai XML menggunakan informasi untuk menyimpan data dengan betul.
+       Ia mempunyai ciri-ciri yang dipaparkan bersama format name=“value” dalam tag
+       pembuka.
+
+   2 - Elemen -> Iaitu data tulen.
+       Iaitu apa penghurai akan menerima daripada fail XML.
+       Elemen memaparkan diantara pembuka dan penutup tag. —>
+
+
+<!-- Di bawah, elemen dengan dua atribut -->
+<file type="gif" id="4293">computer.gif</file>
+
+
+```
+
+* Dokumen Format sempurna x Pengesahan
+
+Satu dokumen XML adalah format sempurna jika ia adalah sintaksis yang betul.
+Walau bagaimanapun, ia mungkin menyuntik lebih banyak kekangan dalam dokumen itu,
+menggunakan definasi dokumen, seperti DTD dan Skema XML.
+
+Satu dokumen XML yang mana mengikut definasi dokumen dipanggil sah,
+mengenai dokumen itu.
+
+Dengan alat ini, anda boleh menyemak data XML di luar logik aplikasi.
+
+```xml
+
+<!-- Dibawah, anda boleh melihat versi ringkas daripada dokumen bookstore,
+  dengan tambahan definisi DTD. -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE note SYSTEM "Bookstore.dtd">
+<bookstore>
+  <book category="COOKING">
+    <title >Everyday Italian</title>
+    <price>30.00</price>
+  </book>
+</bookstore>
+
+<!-- DTD boleh menjadi sesuatu seperti ini: -->
+
+<!DOCTYPE note
+[
+<!ELEMENT bookstore (book+)>
+<!ELEMENT book (title,price)>
+<!ATTLIST book category CDATA "Literature">
+<!ELEMENT title (#PCDATA)>
+<!ELEMENT price (#PCDATA)>
+]>
+
+
+<!-- DTD bermula dengan pengisytiharan.
+  Berikut, nod akar diisytihar, memerlukan 1 atau lebih nod anak ‘book’.
+  Setiap ‘book’ harus mengandungi betul-betul satu ‘title’ dan ‘price’ dan atribut
+  dipanggil ‘category’, bersama “Literature" sebagai nilai lalai ia.
+  Nod ‘title’ dan ‘price’  mengandungi aksara data terhurai.-—>
+
+<!-- DTD boleh diisytiharkan di dalam fail XML itu sendiri. -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!DOCTYPE note
+[
+<!ELEMENT bookstore (book+)>
+<!ELEMENT book (title,price)>
+<!ATTLIST book category CDATA "Literature">
+<!ELEMENT title (#PCDATA)>
+<!ELEMENT price (#PCDATA)>
+]>
+
+<bookstore>
+  <book category="COOKING">
+    <title >Everyday Italian</title>
+    <price>30.00</price>
+  </book>
+</bookstore>
+```
diff --git a/nl-nl/coffeescript-nl.html.markdown b/nl-nl/coffeescript-nl.html.markdown
index dc0b1e19..390e6572 100644
--- a/nl-nl/coffeescript-nl.html.markdown
+++ b/nl-nl/coffeescript-nl.html.markdown
@@ -6,6 +6,7 @@ contributors:
 translators:
   - ["Jelle Besseling", "https://github.com/Jell-E"]
   - ["D.A.W. de Waal", "http://github.com/diodewaal"]
+  - ["Sam van Kampen", "http://tehsvk.net"]
 filename: coffeescript-nl.coffee
 lang: nl-nl
 ---
@@ -13,10 +14,10 @@ lang: nl-nl
 CoffeeScript is een kleine programmeertaal die direct compileert naar
 JavaScript en er is geen interpretatie tijdens het uitvoeren.
 CoffeeScript probeert om leesbare, goed geformatteerde en goed draaiende
-JavaScript code te genereren, die in elke JavaScript runtime werkt, als een
+JavaScript code te genereren, die in elke JavaScript-runtime werkt, als een
 opvolger van JavaScript.
 
-Op [de CoffeeScript website](http://coffeescript.org/), staat een
+Op [de CoffeeScript-website](http://coffeescript.org/), staat een
 volledigere tutorial voor CoffeeScript.
 
 ``` coffeescript
@@ -26,7 +27,7 @@ volledigere tutorial voor CoffeeScript.
 
 ###
 Blokken commentaar maak je zo, ze vertalen naar JavaScripts */ en /*
-in de uitvoer van de CoffeeScript compiler.
+in de uitvoer van de CoffeeScript-compiler.
 
 Het is belangrijk dat je ongeveer snapt hoe JavaScript
 werkt voordat je verder gaat.
@@ -43,7 +44,7 @@ getal = -42 if tegengestelde #=> if(tegengestelde) { getal = -42; }
 kwadraat = (x) -> x * x #=> var kwadraat = function(x) { return x * x; }
 
 vul = (houder, vloeistof = "koffie") ->
-  "Nu de #{houder} met #{koffie} aan het vullen..."
+  "Nu de #{houder} met #{vloeistof} aan het vullen..."
 #=>var vul;
 #
 #vul = function(houder, vloeistof) {
@@ -80,7 +81,7 @@ wedstrijd = (winnaar, lopers...) ->
 alert "Ik wist het!" if elvis?
 #=> if(typeof elvis !== "undefined" && elvis !== null) { alert("I knew it!"); }
 
-# Lijst abstractie:
+# Lijstabstracties:
 derdemachten = (wiskunde.derdemacht num for num in lijst)
 #=>derdemachten = (function() {
 #	var _i, _len, _results;
diff --git a/nl-nl/json-nl.html.markdown b/nl-nl/json-nl.html.markdown
new file mode 100644
index 00000000..906112ff
--- /dev/null
+++ b/nl-nl/json-nl.html.markdown
@@ -0,0 +1,71 @@
+---
+language: json
+filename: learnjson-nl.json
+contributors:
+  - ["Anna Harren", "https://github.com/iirelu"]
+  - ["Marco Scannadinari", "https://github.com/marcoms"]
+  - ["himanshu", "https://github.com/himanshu81494"]
+translators:
+  - ["Niels van Velzen", "https://nielsvanvelzen.me"]
+lang: nl-nl
+---
+
+Gezien JSON een zeer eenvouding formaat heeft zal dit een van de simpelste
+Learn X in Y Minutes ooit zijn.
+
+JSON heeft volgens de specificaties geen commentaar, ondanks dat hebben de
+meeste parsers support voor C-stijl (`//`, `/* */`) commentaar.
+Sommige parsers staan zelfs trailing komma's toe.
+(Een komma na het laatste element in een array of ahter de laatste eigenshap van een object).
+Het is wel beter om dit soort dingen te vermijden omdat het niet overal zal werken.
+
+In het voorbeeld zal alleen 100% geldige JSON gebruikt worden.
+
+Data types gesupport door JSON zijn: nummers, strings, booleans, arrays, objecten en null.
+Gesupporte browsers zijn: Firefox(Mozilla) 3.5, Internet Explorer 8, Chrome, Opera 10, Safari 4.
+De extensie voor JSON bestanden is ".json". De MIME type is "application/json"
+Enkele nadelen van JSON zijn het gebrek een type definities en een manier van DTD.
+
+```json
+{
+  "sleutel": "waarde",
+
+  "sleutels": "zijn altijd in quotes geplaatst",
+  "nummers": 0,
+  "strings": "Hallø, wereld. Alle unicode karakters zijn toegestaan, samen met \"escaping\".",
+  "boolean": true,
+  "niks": null,
+
+  "groot nummer": 1.2e+100,
+
+  "objecten": {
+    "commentaar": "In JSON gebruik je vooral objecten voor je strutuur",
+
+    "array": [0, 1, 2, 3, "Arrays kunnen alles in zich hebben.", 5],
+
+    "nog een object": {
+      "commentaar": "Objecten kunnen genest worden, erg handig."
+    }
+  },
+
+  "dwaasheid": [
+    {
+      "bronnen van kalium": ["bananen"]
+    },
+    [
+      [1, 0, 0, 0],
+      [0, 1, 0, 0],
+      [0, 0, 1, "neo"],
+      [0, 0, 0, 1]
+    ]
+  ],
+
+  "alternatieve stijl": {
+    "commentaar": "Kijk dit!"
+  , "De komma positie": "maakt niet uit zolang het er maar is"
+  , "nog meer commentaar": "wat leuk"
+  },
+
+  "dat was kort": "En nu ben je klaar, dit was alles wat je moet weten over JSON."
+}
+```
diff --git a/nl-nl/json.html.markdown b/nl-nl/json.html.markdown
new file mode 100644
index 00000000..bedfb70a
--- /dev/null
+++ b/nl-nl/json.html.markdown
@@ -0,0 +1,61 @@
+---
+language: json
+filename: learnjson-nl.json
+contributors:
+  - ["Anna Harren", "https://github.com/iirelu"]
+  - ["Marco Scannadinari", "https://github.com/marcoms"]
+translators:
+  - ["Mathieu De Coster", "https://github.com/m-decoster"]
+lang: nl-nl
+---
+
+Aangezien JSON een extreem eenvoudig datauitwisselingsformaat is, zal dit waarschijnlijk
+de meest eenvoudige Learn X in Y Minutes ooit zijn.
+
+Puur JSON heeft geen commentaar, maar de meeste parsers zullen commentaar in de stijl
+van C (`//`, `/* */`) aanvaarden. In dit voorbeeld zal alles 100% correcte JSON zijn.
+Gelukkig spreekt het meeste voor zichzelf.
+
+```json
+{
+  "key": "value",
+
+  "keys": "moeten altijd tussen dubbele aanhalingstekens staan",
+  "getallen": 0,
+  "strings": "Hellø, world. Alle Unicode-karakters zijn toegelaten, zo ook \"escaping\".",
+  "heeft json booleans?": true,
+  "niets": null,
+
+  "groot getal": 1.2e+100,
+
+  "objecten": {
+    "commentaar": "De meeste structuur wordt gemaakt met objecten.",
+
+    "array": [0, 1, 2, 3, "Arrays kunnen eender wat bevatten.", 5],
+
+    "nog een object": {
+      "commentaar": "Hoe handig, we kunnen objecten nesten."
+    }
+  },
+
+  "dwaasheid": [
+    {
+      "bronnen van kalium": ["bananen"]
+    },
+    [
+      [1, 0, 0, 0],
+      [0, 1, 0, 0],
+      [0, 0, 1, "neo"],
+      [0, 0, 0, 1]
+    ]
+  ],
+
+  "alternatieve stijl": {
+    "commentaar": "kijk hier eens naar!"
+  , "komma locatie": "maakt niet uit - zo lang het voor de value komt, is alles in orde"
+  , "nog commentaar": "hoe leuk"
+  },
+
+  "dat was kort": "Je bent klaar. Je kent nu alles dat JSON kan aanbieden."
+}
+```
diff --git a/nl-nl/typescript-nl.html.markdown b/nl-nl/typescript-nl.html.markdown
new file mode 100644
index 00000000..dcea2a4d
--- /dev/null
+++ b/nl-nl/typescript-nl.html.markdown
@@ -0,0 +1,174 @@
+---
+language: TypeScript
+contributors:
+    - ["Philippe Vlérick", "https://github.com/pvlerick"]
+filename: learntypescript-nl.ts
+translators:
+  - ["Niels van Velzen", "https://nielsvanvelzen.me"]
+lang: nl-nl
+---
+
+TypeScript is een taal gericht op het versoepelen van de ontwikkeling van
+grote applicaties gemaakt in JavaScript.
+TypeScript voegt veelgebruikte technieken zoals klassen, modules, interfaces,
+generieken en statische typen toe aan JavaScript.
+TypeScript is een superset van JavaScript: alle JavaScript code is geldige
+TypeScript code waardoor de overgang van JavaScript naar TypeScript wordt versoepeld.
+
+Dit artikel focust zich alleen op de extra's van TypeScript tegenover [JavaScript] (../javascript-nl/).
+
+Om de compiler van TypeScript te kunnen proberen kun je naar de [Playground] (http://www.typescriptlang.org/Playground) gaan.
+Hier kun je automatisch aangevulde code typen in TypeScript en de JavaScript variant bekijken.
+
+```js
+// Er zijn 3 basis typen in TypeScript
+var isKlaar: boolean = false;
+var lijnen: number = 42;
+var naam: string = "Peter";
+
+// Wanneer het type onbekend is gebruik je "Any"
+var nietZeker: any = 4;
+nietZeker = "misschien een string";
+nietZeker = false; // Toch een boolean
+
+// Voor collecties zijn er "typed arrays"
+var lijst: number[] = [1, 2, 3];
+// of generieke arrays
+var lijst: Array<number> = [1, 2, 3];
+
+// Voor enumeraties:
+enum Kleur {Rood, Groen, Blauw};
+var c: Kleur = Kleur.Groen;
+
+// Als laatst, "void" wordt gebruikt voor als een functie geen resultaat geeft
+function groteVerschrikkelijkeMelding(): void {
+  alert("Ik ben een vervelende melding!");
+}
+
+// Functies zijn eersteklas ?, supporten de lambda "fat arrow" syntax en
+// gebruiken gebruiken "type inference"
+
+// Het volgende is allemaal hetzelfde
+var f1 = function(i: number): number { return i * i; }
+var f2 = function(i: number) { return i * i; }
+var f3 = (i: number): number => { return i * i; }
+var f4 = (i: number) => { return i * i; }
+// Omdat we maar 1 lijn gebruiken hoeft het return keyword niet gebruikt te worden
+var f5 = (i: number) =>  i * i;
+
+// Interfaces zijn structureel, elk object wat de eigenschappen heeft
+// is een gebruiker van de interface
+interface Persoon {
+  naam: string;
+  // Optionele eigenschappen worden gemarkeerd met "?"
+  leeftijd?: number;
+  // En natuurlijk functies
+  verplaats(): void;
+}
+
+// Object die gebruikt maakt van de "Persoon" interface
+// Kan gezien worden als persoon sinds het de naam en verplaats eigenschappen bevat
+var p: Persoon = { naam: "Bobby", verplaats: () => {} };
+// Object met de optionele leeftijd eigenschap
+var geldigPersoon: Persoon = { naam: "Bobby", leeftijd: 42, verplaats: () => {} };
+// Ongeldig persoon vanwege de leeftijds type
+var ongeldigPersoon: Persoon = { naam: "Bobby", leeftijd: true };
+
+// Interfaces kunnen ook een functie ype beschrijven
+interface ZoekFunc {
+  (bron: string, subString: string): boolean;
+}
+// Alleen de parameters types zijn belangrijk, namen maken niet uit.
+var mySearch: ZoekFunc;
+mySearch = function(src: string, sub: string) {
+  return src.search(sub) != -1;
+}
+
+// Classes - leden zijn standaard publiek
+class Punt {
+    // Eigenschappen
+    x: number;
+
+    // Constructor - de publieke / prive trefwoorden in deze context zullen
+    // eigenschappen in de klasse kunnen aanmaken zonder ze te defineren.
+    // In dit voorbeeld zal "y" net als "x" gedefineerd worden met minder code.
+    // Standaard waardes zijn ook gesupport
+
+    constructor(x: number, public y: number = 0) {
+        this.x = x;
+    }
+
+    // Functies
+    dist(): number { return Math.sqrt(this.x * this.x + this.y * this.y); }
+
+    // Statische leden
+    static origin = new Punt(0, 0);
+}
+
+var p1 = new Punt(10 ,20);
+var p2 = new Punt(25); // y zal de waarde 0 krijgen
+
+// Overnemen
+class Punt3D extends Punt {
+    constructor(x: number, y: number, public z: number = 0) {
+        super(x, y); // Constructor van ouder aanroepen (Punt)
+    }
+
+    // Overschrijven
+    dist(): number {
+        var d = super.dist();
+        return Math.sqrt(d * d + this.z * this.z);
+    }
+}
+
+// Modules werken ongeveer hetzelfde als namespaces
+// met "." kan je submodules defineren
+module Geometrie {
+  export class Vierkant {
+    constructor(public zijLengte: number = 0) {
+    }
+
+    oppervlakte() {
+      return Math.pow(this.zijLengte, 2);
+    }
+  }
+}
+
+var s1 = new Geometrie.Vierkant(5);
+
+// Local alias for referencing a module
+import G = Geometrie;
+
+var s2 = new G.Vierkant(10);
+
+// Generieken
+// Classes
+class Tupel<T1, T2> {
+    constructor(public item1: T1, public item2: T2) {
+    }
+}
+
+// Interfaces
+interface Paar<T> {
+    item1: T;
+    item2: T;
+}
+
+// En functies
+var paarNaarTupel = function<T>(p: Paar<T>) {
+    return new Tupel(p.item1, p.item2);
+};
+
+var tupel = paarNaarTupel({ item1: "hallo", item2: "wereld" });
+
+// Refferentie naar een definitie bestand:
+/// <reference path="jquery.d.ts" />
+
+```
+
+## Verder lezen (engels)
+ * [TypeScript Official website] (http://www.typescriptlang.org/)
+ * [TypeScript language specifications (pdf)] (http://go.microsoft.com/fwlink/?LinkId=267238)
+ * [Anders Hejlsberg - Introducing TypeScript on Channel 9] (http://channel9.msdn.com/posts/Anders-Hejlsberg-Introducing-TypeScript)
+ * [Source Code on GitHub] (https://github.com/Microsoft/TypeScript)
+ * [Definitely Typed - repository for type definitions] (http://definitelytyped.org/)
diff --git a/nl-nl/xml-nl.html.markdown b/nl-nl/xml-nl.html.markdown
new file mode 100644
index 00000000..930f7cf4
--- /dev/null
+++ b/nl-nl/xml-nl.html.markdown
@@ -0,0 +1,134 @@
+---
+language: xml
+filename: learnxml-nl.xml
+contributors:
+  - ["Jo�o Farias", "https://github.com/JoaoGFarias"]
+translators:
+  - ["Frank van Gemeren", "https://github.com/frvge"]
+lang: nl-nl
+---
+
+XML is een markuptaal die ontwikkeld is om data in te bewaren en data mee te 
+verzenden.
+
+Anders dan HTML specificeert XML niet hoe data getoond of geformatteerd moet worden. 
+Het bevat de data slechts.
+
+* XML Syntax
+
+```xml
+<!-- Dit is commentaar in XML -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<boekenwinkel>
+  <boek categorie="KOKEN">
+    <title taal="nl">Alledaags Italiaans</titel>
+    <auteur>Giada De Laurentiis</auteur>
+    <jaar>2005</jaar>
+    <prijs>30.00</prijs>
+  </boek>
+  <boek categorie="KINDEREN">
+    <titel taal="nl">Harry Potter</titel>
+    <auteur>J K. Rowling</auteur>
+    <jaar>2005</jaar>
+    <prijs>29.99</prijs>
+  </boek>
+  <boek categorie="WEB">
+    <titel taal="en">Learning XML</titel>
+    <auteur>Erik T. Ray</auteur>
+    <jaar>2003</jaar>
+    <prijs>39.95</prijs>
+  </boek>
+</boekenwinkel>
+
+<!-- Hierboven staat een standaard XML bestand.
+  Het begint met een declaratie die optionele metadata bevat.
+
+  XML werkt met een boomstructuur. De stamknoop hierboven is 'boekenwinkel'. 
+  Deze heeft drie kinderen die allemaal 'boek' zijn. Deze knopen hebben op 
+  hun beurt weer kinderen, enzovoort...
+
+  Knopen hebben open- en sluittags. Kinderen zijn knopen die zich tussen de 
+  open- en sluittags van hun ouders bevinden. -->
+
+<!-- XML bevat two soorten data:
+  1 - Attributen -> Dit is metadata van een knoop.
+      Deze informatie wordt meestal door de XML parser gebruikt om de data op
+      de juiste manier op te slaan. Je herkent het door de syntax in de vorm 
+      van naam="waarde" in de open tag.
+  2 - Elementen -> Dit is de pure data
+      Deze gegevens worden door de parser uit het XML bestand gehaald.
+      Elementen staan tussen de open- en sluittags. -->
+
+
+<!-- Hieronder staat een element met twee attributen -->
+<bestand type="gif" id="4293">computer.gif</bestand>
+
+
+```
+
+* Grammaticaal correcte documenten x Validatie
+
+Een XML document is "grammaticaal correct" of "well-formatted" als de 
+syntax correct is. Het is ook mogelijk om meer structuur in het document 
+aan te brengen met document definities zoals DTD en XML Schema.
+
+Een XML document dat aan een document definitie voldoet wordt "valide" volgens 
+die document definitie genoemd.
+
+Met deze gereedschappen kan je de XML data buiten je applicatie logica 
+controleren.
+
+```xml
+
+<!-- Hieronder staat een versimpelde versie voor een boekenwinkel document,
+  met een toevoeging van een DTD definitie. -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE note SYSTEM "boekenwinkel.dtd">
+<boekenwinkel>
+  <boek categorie="KOKEN">
+    <titel>Alledaags Italiaans</titel>
+    <prijs>30.00</prijs>
+  </boek>
+</boekenwinkel>
+
+<!-- De DTD kan er als volgt uitzien:-->
+
+<!DOCTYPE note
+[
+<!ELEMENT boekenwinkel (boek+)>
+<!ELEMENT boek (titel,prijs)>
+<!ATTLIST boek categorie CDATA "Literatuur">
+<!ELEMENT titel (#PCDATA)>
+<!ELEMENT prijs (#PCDATA)>
+]>
+
+
+<!-- De DTD begint met een declaratie.
+  Hierna volgt de declaratie van de stamknoop, die 1 of meer 'boek' kinderen 
+  moet bevatten. 
+  Elk 'boek' moet precies 1 'titel' en 'prijs' element bevatten en een attribuut 
+  'categorie' hebben waarvan 'Literatuur' de standaard waarde is.
+  De 'titel' en 'prijs' knopen bevatten parsed character data.-->
+
+<!-- De DTD kan ook in het XML bestand zelf gedeclareerd worden.-->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!DOCTYPE note
+[
+<!ELEMENT boekenwinkel (boek+)>
+<!ELEMENT boek (titel,prijs)>
+<!ATTLIST boek categorie CDATA "Literatuur">
+<!ELEMENT titel (#PCDATA)>
+<!ELEMENT prijs (#PCDATA)>
+]>
+
+<boekenwinkel>
+  <boek categorie="KOKEN">
+    <titel>Alledaags Italiaans</titel>
+    <prijs>30.00</prijs>
+  </boek>
+</boekenwinkel>
+```
\ No newline at end of file
diff --git a/ocaml.html.markdown b/ocaml.html.markdown
index 8faab297..a346550c 100644
--- a/ocaml.html.markdown
+++ b/ocaml.html.markdown
@@ -104,7 +104,7 @@ let fact_4 = factorial (5-1) ;;
 let sqr2 = sqr (-2) ;;
 
 (* Every function must have at least one argument.
-   Since some funcions naturally don't take any arguments, there's
+   Since some functions naturally don't take any arguments, there's
    "unit" type for it that has the only one value written as "()" *)
 let print_hello () = print_endline "hello world" ;;
 
diff --git a/php.html.markdown b/php.html.markdown
index 6944390c..6c2b38c8 100644
--- a/php.html.markdown
+++ b/php.html.markdown
@@ -539,10 +539,23 @@ class MyClass
         print 'MyClass';
     }
 
-    //final keyword would make a function unoverridable
+    // final keyword would make a function unoverridable
     final function youCannotOverrideMe()
     {
     }
+    
+    // Magic Methods
+    
+    // what to do if Object is treated as a String
+    public function __toString() {
+        return $property;
+    }
+    
+    // opposite to __construct()
+    // called when object is no longer referenced
+    public function __destruct() {
+        print "Destroying";
+    }
 
 /*
  * Declaring class properties or methods as static makes them accessible without
diff --git a/pt-br/amd.html.markdown b/pt-br/amd.html.markdown
new file mode 100644
index 00000000..690fc8da
--- /dev/null
+++ b/pt-br/amd.html.markdown
@@ -0,0 +1,218 @@
+---
+category: tool
+tool: amd
+contributors:
+    - ["Frederik Ring", "https://github.com/m90"]
+translators:
+    - ["Felipe Tarijon", "http://nanoincub.com/"]
+lang: ptr-br
+filename: learnamd-pt.js
+---
+
+## Começando com AMD
+
+A API de Definição de Módulos Assíncrona **Asynchronous Module Definition** 
+especifica um mecanismo para definição de módulos em JavaScript para os quais o
+módulo e suas dependências podem ser carregados de forma assíncrona. Isso é
+particularmente bem adequado para o ambiente do browser onde o carregamento de
+módulos de forma síncrona fica sujeito a problemas de performance, usabilidade,
+debugging e problemas de acesso em requisições cross-domain.
+
+### Conceito básico
+```javascript
+// O básico da API de AMD consiste de nada mais que dois métodos: `define` e `require`
+// e isso é tudo sobre a definição de módulo e consumo:
+// `define(id?, dependências?, factory)` define um módulo
+// `require(dependências, callback)` importa uma série de dependências e
+// consome elas no callback passado como parâmetro.
+
+// Vamos começar usando o define para definir um novo módulo
+// que não tem dependências. Nós vamos fazer isso passando um nome
+// e uma função factory para definir:
+define('awesomeAMD', function(){
+  var isAMDAwesome = function(){
+    return true;
+  };
+  // O valor retornado da função de factory do módulo é
+  // o que os outros módulos ou chamadas de require irão
+  // receber quando requisitarem nosso módulo `awesomeAMD`.
+  // O valor exportado pode ser qualquer coisa, (construtor) funções,
+  // objetos, primitives, até mesmo undefined (apesar de que não irão ajudar muito).
+  return isAMDAwesome;
+});
+
+// Agora, vamos definir outro módulo que depende do nosso módulo `awesomeAMD`.
+// Perceba que existe um argumento adicional definindo nossas dependências do
+// módulo agora:
+define('loudmouth', ['awesomeAMD'], function(awesomeAMD){
+  // dependências serão passadas como argumentos da factory
+  // na ordem que elas forem especificadas
+  var tellEveryone = function(){
+    if (awesomeAMD()){
+      alert('Isso é tãaaao loko!');
+    } else {
+      alert('Bem estúpido, né não?');
+    }
+  };
+  return tellEveryone;
+});
+
+// Agora que nós sabemos como usar o define, vamos usar o `require` para
+// começar nosso programa. A assinatura do `require` é `(arrayDedependências, callback)`.
+require(['loudmouth'], function(loudmouth){
+  loudmouth();
+});
+
+// Para fazer esse tutorial executável, vamos implementar uma versão muito básica
+// (não-assíncrona) de AMD bem aqui nesse lugar:
+function define(nome, deps, factory){
+  // perceba como os módulos sem dependências são manipulados
+  define[nome] = require(factory ? deps : [], factory || deps);
+}
+
+function require(deps, callback){
+  var args = [];
+  // primeiro vamos recuperar todas as dependências necessárias
+  // pela chamada requerida
+  for (var i = 0; i < deps.length; i++){
+    args[i] = define[deps[i]];
+  }
+  // corresponder todas as dependências da função de callback
+  return callback.apply(null, args);
+}
+// você pode ver esse código em ação aqui: http://jsfiddle.net/qap949pd/
+```
+
+### Uso na vida real com require.js
+
+Em contraste com o exemplo introdutório, `require.js` (a biblioteca mais popular de AMD) na verdade implementa o **A** do **AMD**, permitindo que você carregue os módulos e suas
+dependências via XHR:
+
+```javascript
+/* file: app/main.js */
+require(['modules/algumaClasse'], function(AlgumaClasse){
+  // o callback é deferido até que a dependencia seja carregada
+  var coisa = new AlgumaClasse();
+});
+console.log('Então aqui estamos nós, esperando!'); // isso vai rodar primeiro
+```
+
+Por convenção, você geralmente guarda um módulo em um arquivo. `require.js` pode resolver nome de módulos baseado no caminho das pastas, então você não precisa nomear os seus módulos, mas sim simplesmente referenciar eles usando sua origem. No exemplo `algumaClasse` é adotado a pasta `modules`, relativa a configuração da sua `baseUrl`:
+
+* app/
+  * main.js
+  * modules/
+    * algumaClasse.js
+    * algunsHelpers.js
+    * ...
+  * daos/
+    * coisas.js
+    * ...
+
+Isso significa que nós podemos definir `algumaClasse` sem especificar o id de um módulo:
+
+```javascript
+/* arquivo: app/modules/algumaClasse.js */
+define(['daos/coisas', 'modules/algunsHelpers'], function(coisasDao, helpers){
+  // definição de módulo, claro, irá acontecer também de forma assíncrona
+  function AlgumaClasse(){
+    this.metodo = function(){/**/};
+    // ...
+  }
+  return AlgumaClasse;
+});
+```
+Para alterar o comportamento padrão de mapeamento de caminho de pastas utilize
+`requirejs.config(configObj)` em seu `main.js`:
+
+```javascript
+/* arquivo: main.js */
+requirejs.config({
+  baseUrl : 'app',
+  paths : {
+    // você pode também carregar módulos de outros locais
+    jquery : '//ajax.googleapis.com/ajax/libs/jquery/1.11.1/jquery.min',
+    coolLibFromBower : '../bower_components/cool-lib/coollib'
+  }
+});
+require(['jquery', 'coolLibFromBower', 'modules/algunsHelpers'], function($, coolLib, helpers){
+  // um arquivo `main` precisa chamar o require pelo menos uma vez,
+  // caso contrário, o código jamais rodará
+  coolLib.facaAlgoDoidoCom(helpers.transform($('#foo')));
+});
+```
+Apps baseados em `require.js` geralmente terão u´m único ponto de acesso (`main.js`) que é passado à tag script do `require.js` como um data-attribute. Ele vai ser automaticamente carregado e executado com o carregamento da página:
+
+```html
+<!DOCTYPE html>
+<html>
+<head>
+  <title>Umas 100 tags de script? Nunca mais!</title>
+</head>
+<body>
+  <script src="require.js" data-main="app/main"></script>
+</body>
+</html>
+```
+
+### Otimizando um projeto inteiro utilizando r.js
+
+Muitas pessoas preferem usar AMD para sanar a organização do código durante o desenvolvimento, mas continuam querendo colocar um único arquivo de script em produção ao invés de realizarem centenas de requisições XHRs no carregamento da página.
+
+`require.js` vem com um script chamado `r.js` (que você vai provavelmente rodar em node.js, embora Rhino suporte também) que você pode analisar o gráfico de dependências de seu projeto, e fazer em um único arquivo contendo todos os seus módulos (corretamente nomeados), minificados e prontos para serem consumidos.
+
+Instale-o utilizando `npm`:
+```shell
+$ npm install requirejs -g
+```
+
+Agora você pode alimentá-lo com um arquivo de configuração:
+```shell
+$ r.js -o app.build.js
+```
+
+Para o nosso exemplo acima a configuração pode ser essa:
+```javascript
+/* file : app.build.js */
+({
+  name : 'main', // nome do ponto de acesso
+  out : 'main-built.js', // nome o arquivo para gravar a saída
+  baseUrl : 'app',
+  paths : {
+    // `empty:` fala para o r.js que isso ainda deve ser baixado da CDN, usando
+    // o local especificado no `main.js`
+    jquery : 'empty:',
+    coolLibFromBower : '../bower_components/cool-lib/coollib'
+  }
+})
+```
+
+Para usar o arquivo gerado, em produção, simplesmente troque o `data-main`:
+```html
+<script src="require.js" data-main="app/main-built"></script>
+```
+
+Uma incrível e detalhada visão geral [de build options](https://github.com/jrburke/r.js/blob/master/build/example.build.js) está disponível no repositório do GitHub.
+
+### Tópicos não abordados nesse tutorial
+* [Plugins de carregamento / transforms](http://requirejs.org/docs/plugins.html)
+* [CommonJS style carregamento e exportação](http://requirejs.org/docs/commonjs.html)
+* [Configuração avançada](http://requirejs.org/docs/api.html#config)
+* [Shim configuration (carregando módulos sem AMD)](http://requirejs.org/docs/api.html#config-shim)
+* [Carregando e otimizando CSS com require.js](http://requirejs.org/docs/optimization.html#onecss)
+* [Usando almond.js para builds](https://github.com/jrburke/almond)
+
+### Outras leituras:
+
+* [Especificação oficial](https://github.com/amdjs/amdjs-api/wiki/AMD)
+* [Por quê AMD?](http://requirejs.org/docs/whyamd.html)
+* [Universal Module Definition](https://github.com/umdjs/umd)
+
+### Implementações:
+
+* [require.js](http://requirejs.org)
+* [dojo toolkit](http://dojotoolkit.org/documentation/tutorials/1.9/modules/)
+* [cujo.js](http://cujojs.com/)
+* [curl.js](https://github.com/cujojs/curl)
+* [lsjs](https://github.com/zazl/lsjs)
+* [mmd](https://github.com/alexlawrence/mmd)
diff --git a/pt-br/asymptotic-notation-pt.html.markdown b/pt-br/asymptotic-notation-pt.html.markdown
index c89fb622..2e299d09 100644
--- a/pt-br/asymptotic-notation-pt.html.markdown
+++ b/pt-br/asymptotic-notation-pt.html.markdown
@@ -5,6 +5,7 @@ contributors:
     - ["Jake Prather", "http://github.com/JakeHP"]
 translators:
     - ["João Farias", "https://github.com/JoaoGFarias"]
+lang: pt-br
 ---
 
 # Notação Assintótica
diff --git a/pt-br/bash-pt.html.markdown b/pt-br/bash-pt.html.markdown
new file mode 100644
index 00000000..a604e7b8
--- /dev/null
+++ b/pt-br/bash-pt.html.markdown
@@ -0,0 +1,282 @@
+---
+category: tool
+tool: bash
+contributors:
+    - ["Max Yankov", "https://github.com/golergka"]
+    - ["Darren Lin", "https://github.com/CogBear"]
+    - ["Alexandre Medeiros", "http://alemedeiros.sdf.org"]
+    - ["Denis Arh", "https://github.com/darh"]
+    - ["akirahirose", "https://twitter.com/akirahirose"]
+    - ["Anton Strömkvist", "http://lutic.org/"]
+translators:
+    - ["Davidson Mizael", "https://github.com/davidsonmizael"]
+filename: LearnBash-pt_br.sh
+lang: pt-br
+---
+
+Tutorial de shell em português
+
+Bash é o nome do shell do Unix, que também é distribuido como shell do sistema 
+operacional GNU e como shell padrão para Linux e Mac OS X. Praticamente todos 
+os exemplos abaixo podem fazer parte de um shell script e pode ser executados
+diretamente no shell.
+
+[Leia mais sobre](http://www.gnu.org/software/bash/manual/bashref.html)
+
+```bash
+#!/bin/bash
+# A primeira linha do script é o shebang, que conta para o sistema como executar
+# o script: http://en.wikipedia.org/wiki/Shebang_(Unix)
+# Como você já deve ter percebido, comentários começam com #. 
+# Shebang também é um comentário.
+
+# Exemplo simples de hello world:
+echo Hello World!
+
+# Cada comando começa com uma nova linha, ou após um ponto virgula:
+echo 'Essa é a primeira linha'; echo 'Essa é a segunda linha'
+
+# A declaração de variáveis é mais ou menos assim
+Variavel="Alguma string"
+
+# Mas não assim:
+Variavel = "Alguma string"
+# Bash interpretará Variavel como um comando e tentará executar e lhe retornar
+# um erro porque o comando não pode ser encontrado.
+
+# Ou assim:
+Variavel= 'Alguma string'
+# Bash interpretará 'Alguma string' como um comando e tentará executar e lhe retornar
+# um erro porque o comando não pode ser encontrado. (Nesse caso a a parte 'Variavel=' 
+# é vista com uma declaração de variável valida apenas para o escopo do comando 'Uma string').
+
+# Usando a variável:
+echo $Variavel
+echo "$Variavel"
+echo '$Variavel'
+# Quando você usa a variável em si — declarando valor, exportando, etc — você escreve
+# seu nome sem o $. Se você quer usar o valor da variável você deve usar o $.
+# Note que ' (aspas simples) não expandirão as variáveis!
+
+# Substituição de strings em variáveis
+echo ${Variavel/Alguma/Uma}
+# Isso substituirá a primeira ocorrência de "Alguma" por "Uma"
+
+# Substring de uma variável
+Tamanho=7
+echo ${Variavel:0:Tamanho}
+# Isso retornará apenas os 7 primeiros caractéres da variável
+
+# Valor padrão de uma variável
+echo ${Foo:-"ValorPadraoSeFooNaoExistirOuEstiverVazia"}
+# Isso funciona para nulo (Foo=) e (Foo=""); zero (Foo=0) retorna 0.
+# Note que isso apenas retornar o valor padrão e não mudar o valor da variável.
+
+# Variáveis internas
+# Tem algumas variáveis internas bem uteis, como
+echo "O ultimo retorno do programa: $?"
+echo "PID do script: $$"
+echo "Numero de argumentos passados para o script $#"
+echo "Todos os argumentos passados para o script $@"
+echo "Os argumentos do script em variáveis diferentes: $1, $2..."
+
+# Lendo o valor do input:
+echo "Qual o seu nome?"
+read Nome # Note que nós não precisamos declarar a variável
+echo Ola, $Nome
+
+# Nós temos a estrutura if normal:
+# use 'man test' para mais infomações para as condicionais
+if [ $Nome -ne $USER ]
+then
+	echo "Seu nome não é o seu username"
+else
+	echo "Seu nome é seu username"
+fi
+
+# Tem também execução condicional
+echo "Sempre executado" || echo "Somente executado se o primeiro falhar"
+echo "Sempre executado" && "Só executado se o primeiro NÃO falhar"
+
+# Para usar && e || com o if, você precisa multiplicar os pares de colchetes
+if [ $Nome == "Estevao"] && [ $Idade -eq 15]
+then
+	echo "Isso vai rodar se $Nome é igual Estevao E $Idade é 15."
+fi
+
+fi [ $Nome == "Daniela" ] || [ $Nome = "Jose" ] 
+then
+	echo "Isso vai rodar se $Nome é Daniela ou Jose."
+fi
+
+# Expressões são denotadas com o seguinte formato
+echo $(( 10 + 5))
+
+# Diferentemente das outras linguagens de programação, bash é um shell, então ele 
+# funciona no diretório atual. Você pode listar os arquivos e diretórios no diretório
+# atual com o comando ls:
+ls
+
+#Esse comando tem opções que controlam sua execução
+ls -l # Lista todo arquivo e diretorio em linhas separadas
+
+# Os resultados do comando anterior pode ser passado para outro comando como input.
+# O comando grep filtra o input com o padrão passado. É assim que listamos apenas
+# os arquivos .txt no diretório atual:
+ls -l | grep "\.txt"
+
+# Você pode redirecionar o comando de input e output (stdin, stdout e stderr).
+# Lê o stdin até ^EOF$ e sobrescreve hello.py com as linhas entre "EOF":
+cat > hello.py << EOF
+#!/usr/bin/env python
+from __future__ imprt print_function
+import sys
+print("#stdout", file=sys.stdout)
+print("stderr", file=sys.stderr)
+for line in sys.stdin:
+	print(line, file=sys.stdout)
+EOF
+
+# Rode hello.py com várias instruções stdin, stdout e stderr:
+python hello.py < "input.in"
+python hello.py > "ouput.out"
+python hello.py 2> "error.err"
+python hello.py > "output-and-error.log" 2>&1
+python hello.py > /dev/null 2>&1
+# O erro no output sobrescreverá o arquivo se existir,
+# se ao invés disso você quiser complementar, use ">>":
+python hello.py >> "output.out" 2>> "error.err"
+
+# Sobrescreve output.out, complemente para error.err e conta as linhas
+info bash 'Basic Shell Features' 'Redirections' > output.out 2>> error.err
+wc -l output.out error.err
+
+#Roda um comando e imprime o desencriptador (e.g. /dev/fd/123)
+# veja: man fd
+echo <(echo "#helloworld")
+
+# Sobrescreve ouput.out com "#helloworld":
+cat > output.out <(echo "#helloworld")
+echo "#helloworld" > output.out
+echo "#helloworld" | cat > output.out
+echo "#helloworld" | tee output.out > /dev/null
+
+# Limpa os arquivos temporarios detalhando quais foram deletados (use '-i' para confirmar exlusão)
+rm -v output.out error.err output-and-error.log
+
+# Comando podem ser substituidos por outros comandos usando $( ):
+# O comand oa seguir mostra o número de arquivos e diretórios no diretorio atual
+echo "Existem $(ls | wc -l) itens aqui."
+
+# O mesmo pode ser feito usando crase `` mas elas não podem ser aninhadas - dá se 
+# preferência ao uso do $( )
+echo "Existem `ls | wc -l` itens aqui."
+
+# Bash usa o comando case que funciona de uma maneira similar ao switch de Java e C++:
+case "$Variavel" in
+	# Lista de parametros para condições que você quer encontrar
+	0) echo "Isso é um Zero.";;
+	1) echo "Isso é um Um.";;
+	*) echo "Isso não é null.";;
+esac
+
+# loops for iteragem para quantos argumentos passados:
+# O conteudo de $Variavel é exibido três vezes.
+for Variavel in {1..3}
+do
+	echo "$Variavel"
+done
+
+# Ou use o loop da "maneira tradicional":
+for ((a=1; a <= 3; a++))
+do
+	echo $a
+done
+
+# Eles também podem ser usados em arquivos...
+# Isso irá rodar o comando 'cat' em arquivo1 e arquivo2
+for Variavel in arquivo1 arquivo2
+do
+	cat "$Variavel"
+done
+
+# ...ou o output de um comando
+# Isso irá usar cat no output do ls.
+for Output in $(ls)
+do
+	cat "$Output"
+done
+
+# loop while:
+while [ true ]
+do
+	echo "corpo do loop aqui..."
+	break
+done
+
+# Você também pode usar funções
+# Definição:
+function foo() {
+	echo "Argumentos funcionam bem assim como os dos scripts: $@"
+	echo "E: $1 $2..."
+	echo "Isso é uma função"
+	return 0
+}
+
+# ou simplesmente
+bar () {
+	echo "Outro jeito de declarar funções!"
+	return 0
+}
+
+# Chamando sua função
+foo "Meu nome é" $Nome
+
+# Existe um monte de comandos úteis que você deveria aprender:
+# exibe as 10 ultimas linhas de arquivo.txt
+tail -n 10 arquivo.txt
+# exibe as primeiras 10 linhas de arquivo.txt
+head -n 10 arquivo.txt
+# ordena as linhas de arquivo.txt
+sort arquivo.txt
+# reporta ou omite as linhas repetidas, com -d você as reporta
+uniq -d arquivo.txt
+# exibe apenas a primeira coluna após o caráctere ','
+cut -d ',' -f 1 arquivo.txt
+# substitui todas as ocorrencias de 'okay' por 'legal' em arquivo.txt (é compativel com regex)
+sed -i 's/okay/legal/g' file.txt
+# exibe para o stdout todas as linhas do arquivo.txt que encaixam com o regex
+# O exemplo exibe linhas que começam com "foo" e terminam com "bar"
+grep "^foo.*bar$" arquivo.txt
+# passe a opção "-c" para ao invês de imprimir o numero da linha que bate com o regex
+grep -c "^foo.*bar$" arquivo.txt
+# se você quer literalmente procurar por uma string,
+# e não pelo regex, use fgrep (ou grep -F)
+fgrep "^foo.*bar$" arquivo.txt
+
+
+# Leia a documentação interna do shell Bash com o comando interno 'help':
+help
+help help
+help for 
+help return
+help source
+help .
+
+# Leia a página principal da documentação com man
+apropos bash
+man 1 bash
+man bash
+
+# Leia a documentação de informação com info (? para ajuda)
+apropos info | grep '^info.*('
+man info
+info info 
+info 5 info 
+
+#Leia a documentação informativa do Bash:
+info bash
+info bash 'Bash Features'
+info bash 6
+info --apropos bash 
+```
diff --git a/pt-br/csharp.html.markdown b/pt-br/csharp.html.markdown
new file mode 100644
index 00000000..547f4817
--- /dev/null
+++ b/pt-br/csharp.html.markdown
@@ -0,0 +1,896 @@
+---
+language: c#
+filename: csharp-pt.cs
+contributors:
+    - ["Robson Alves", "http://robsonalves.net/"]    
+lang: pt-br
+---
+
+C# é uma linguagem elegante e altamente tipado orientada a objetos que permite aos desenvolvedores criarem uma variedade de aplicações seguras e robustas que são executadas no .NET Framework.
+
+[Read more here.](http://msdn.microsoft.com/pt-br/library/vstudio/z1zx9t92.aspx)
+
+```c#
+// Comentário de linha única começa com //
+/*
+Múltipas linhas é desta forma
+*/
+/// <summary>
+/// Esta é uma documentação comentário XML que pode ser usado para gerar externo
+/// documentação ou fornecer ajuda de contexto dentro de um IDE
+/// </summary>
+//public void MethodOrClassOrOtherWithParsableHelp() {}
+
+// Especificar qual namespace seu código irá usar
+// Os namespaces a seguir são padrões do .NET Framework Class Library 
+using System;
+using System.Collections.Generic;
+using System.Dynamic;
+using System.Linq;
+using System.Net;
+using System.Threading.Tasks;
+using System.IO;
+
+// Mas este aqui não é :
+using System.Data.Entity;
+// Para que consiga utiliza-lo, você precisa adicionar novas referências
+// Isso pode ser feito com o gerenciador de pacotes NuGet : `Install-Package EntityFramework`
+
+// Namespaces são escopos definidos para organizar o códgo em "pacotes" or "módulos"
+// Usando este código a partir de outra arquivo de origem: using Learning.CSharp;
+namespace Learning.CSharp
+{
+    // Cada .cs deve conter  uma classe com o mesmo nome do arquivo
+    // você está autorizado a contrariar isto, mas evite por sua sanidade.
+    public class AprenderCsharp
+    {
+        // Sintaxe Básica - Pule para as CARACTERÍSTICAS INTERESSANTES se você ja usou Java ou C++ antes.
+        public static void Syntax()
+        {
+            // Use Console.WriteLine para apresentar uma linha
+            Console.WriteLine("Hello World");
+            Console.WriteLine(
+                "Integer: " + 10 +
+                " Double: " + 3.14 +
+                " Boolean: " + true);
+
+            // Para apresentar sem incluir uma nova linha, use Console.Write
+            Console.Write("Hello ");
+            Console.Write("World");
+
+            ///////////////////////////////////////////////////
+            // Tpos e Variáveis
+            //
+            // Declare uma variável usando <tipo> <nome>
+            ///////////////////////////////////////////////////
+
+            // Sbyte - Signed 8-bit integer
+            // (-128 <= sbyte <= 127)
+            sbyte fooSbyte = 100;
+
+            // Byte - Unsigned 8-bit integer
+            // (0 <= byte <= 255)
+            byte fooByte = 100;
+
+            // Short - 16-bit integer
+            // Signed - (-32,768 <= short <= 32,767)
+            // Unsigned - (0 <= ushort <= 65,535)
+            short fooShort = 10000;
+            ushort fooUshort = 10000;
+
+            // Integer - 32-bit integer
+            int fooInt = 1; // (-2,147,483,648 <= int <= 2,147,483,647)
+            uint fooUint = 1; // (0 <= uint <= 4,294,967,295)
+
+            // Long - 64-bit integer
+            long fooLong = 100000L; // (-9,223,372,036,854,775,808 <= long <= 9,223,372,036,854,775,807)
+            ulong fooUlong = 100000L; // (0 <= ulong <= 18,446,744,073,709,551,615)
+            // Numbers default to being int or uint depending on size.
+            // L is used to denote that this variable value is of type long or ulong
+
+            // Double - Double-precision 64-bit IEEE 754 Floating Point
+            double fooDouble = 123.4; // Precision: 15-16 digits
+
+            // Float - Single-precision 32-bit IEEE 754 Floating Point
+            float fooFloat = 234.5f; // Precision: 7 digits
+            // f is used to denote that this variable value is of type float
+
+            // Decimal - a 128-bits data type, with more precision than other floating-point types,
+            // suited for financial and monetary calculations
+            decimal fooDecimal = 150.3m;
+
+            // Boolean - true & false
+            bool fooBoolean = true; // or false
+
+            // Char - A single 16-bit Unicode character
+            char fooChar = 'A';
+
+            // Strings - ao contrário dos anteriores tipos base, que são todos os tipos de valor,
+            // Uma string é um tipo de referência. Ou seja, você pode configurá-lo como nulo
+            string fooString = "\"escape\" quotes and add \n (new lines) and \t (tabs)";
+            Console.WriteLine(fooString);
+
+            //  Você pode acessar todos os caracteres de string com um indexador: 
+            char charFromString = fooString[1]; // => 'e'
+            // Strings são imutáveis: você não pode fazer fooString[1] = 'X';
+
+            // Compare strings com sua atual cultura, ignorando maiúsculas e minúsculas
+            string.Compare(fooString, "x", StringComparison.CurrentCultureIgnoreCase);
+
+            // Formatando, baseado no sprintf
+            string fooFs = string.Format("Check Check, {0} {1}, {0} {1:0.0}", 1, 2);
+
+            // Datas e formatações
+            DateTime fooDate = DateTime.Now;
+            Console.WriteLine(fooDate.ToString("hh:mm, dd MMM yyyy"));
+
+            // Você pode juntar um string em mais de duas linhas com o símbolo @. Para escapar do " use ""
+            string bazString = @"Here's some stuff
+on a new line! ""Wow!"", the masses cried";
+
+            // Use const ou read-only para fazer uma variável imutável
+            // os valores da const são calculados durante o tempo de compilação
+            const int HoursWorkPerWeek = 9001;
+
+            ///////////////////////////////////////////////////
+            // Estrutura de Dados
+            ///////////////////////////////////////////////////
+
+            // Matrizes - zero indexado
+            // O tamanho do array pode ser decidido ainda na declaração
+            // O formato para declarar uma matriz é o seguinte: 
+            // <tipodado>[] <var nome> = new <tipodado>[<array tamanho>];
+            int[] intArray = new int[10];
+
+            // Outra forma de declarar & inicializar uma matriz
+            int[] y = { 9000, 1000, 1337 };
+
+            // Indexando uma matriz - Acessando um elemento
+            Console.WriteLine("intArray @ 0: " + intArray[0]);
+            // Matriz são alteráveis
+            intArray[1] = 1;
+
+            // Listas
+            // Listas são usadas frequentemente tanto quanto matriz por serem mais flexiveis
+            // O formato de declarar uma lista é o seguinte:
+            // List<tipodado> <var nome> = new List<tipodado>();
+            List<int> intList = new List<int>();
+            List<string> stringList = new List<string>();
+            List<int> z = new List<int> { 9000, 1000, 1337 }; // inicializar
+            // O <> são para genéricos - Confira está interessante seção do material
+
+            // Lista não possuem valores padrão.
+            // Um valor deve ser adicionado antes e depois acessado pelo indexador
+            intList.Add(1);
+            Console.WriteLine("intList @ 0: " + intList[0]);
+
+            // Outras estruturas de dados para conferir:
+            // Pilha/Fila
+            // Dicionário (uma implementação de map de hash)
+            // HashSet
+            // Read-only Coleção
+            // Tuple (.Net 4+)
+
+            ///////////////////////////////////////
+            // Operadores
+            ///////////////////////////////////////
+            Console.WriteLine("\n->Operators");
+
+            int i1 = 1, i2 = 2; // Forma curta para declarar diversas variáveis
+
+            // Aritmética é clara
+            Console.WriteLine(i1 + i2 - i1 * 3 / 7); // => 3
+
+            // Modulo
+            Console.WriteLine("11%3 = " + (11 % 3)); // => 2
+
+            // Comparações de operadores
+            Console.WriteLine("3 == 2? " + (3 == 2)); // => falso
+            Console.WriteLine("3 != 2? " + (3 != 2)); // => verdadeiro
+            Console.WriteLine("3 > 2? " + (3 > 2)); // => verdadeiro
+            Console.WriteLine("3 < 2? " + (3 < 2)); // => falso
+            Console.WriteLine("2 <= 2? " + (2 <= 2)); // => verdadeiro
+            Console.WriteLine("2 >= 2? " + (2 >= 2)); // => verdadeiro
+
+            // Operadores bit a bit (bitwise)
+            /*
+            ~       Unário bitwise complemento
+            <<      Signed left shift
+            >>      Signed right shift
+            &       Bitwise AND
+            ^       Bitwise exclusivo OR
+            |       Bitwise inclusivo OR
+            */
+
+            // Incrementações
+            int i = 0;
+            Console.WriteLine("\n->Inc/Dec-rementation");
+            Console.WriteLine(i++); //i = 1. Post-Incrementation
+            Console.WriteLine(++i); //i = 2. Pre-Incrementation
+            Console.WriteLine(i--); //i = 1. Post-Decrementation
+            Console.WriteLine(--i); //i = 0. Pre-Decrementation
+
+            ///////////////////////////////////////
+            // Estrutura de Controle
+            ///////////////////////////////////////
+            Console.WriteLine("\n->Control Structures");
+
+            // Declaração if é como a linguagem C
+            int j = 10;
+            if (j == 10)
+            {
+                Console.WriteLine("I get printed");
+            }
+            else if (j > 10)
+            {
+                Console.WriteLine("I don't");
+            }
+            else
+            {
+                Console.WriteLine("I also don't");
+            }
+
+            // Operador Ternário
+            // Um simples if/else pode ser escrito da seguinte forma
+            // <condição> ? <verdadeiro> : <falso>
+            int toCompare = 17;
+            string isTrue = toCompare == 17 ? "True" : "False";
+
+            // While loop
+            int fooWhile = 0;
+            while (fooWhile < 100)
+            {
+                //Iterated 100 times, fooWhile 0->99
+                fooWhile++;
+            }
+
+            // Do While Loop
+            int fooDoWhile = 0;
+            do
+            {
+                // Inicia a interação 100 vezes, fooDoWhile 0->99
+                if (false)
+                    continue; // pule a intereção atual para apróxima
+
+                fooDoWhile++;
+
+                if (fooDoWhile == 50)
+                    break; // Interrompe o laço inteiro
+
+            } while (fooDoWhile < 100);
+
+            //estrutura de loop for  => for(<declaração para começar>; <condicional>; <passos>)
+            for (int fooFor = 0; fooFor < 10; fooFor++)
+            {
+                //Iterado 10 vezes, fooFor 0->9
+            }
+
+            // For Each Loop
+            // Estrutura do foreach  => foreach(<Tipo Iterador> <Nome do Iterador> in <enumerable>)
+            // O laço foreach  percorre sobre qualquer objeto que implementa IEnumerable ou IEnumerable<T>
+            // Toda a coleção de tipos  (Array, List, Dictionary...) no .Net framework
+            // implementa uma ou mais destas interfaces.
+            // (O ToCharArray() pode ser removido, por que uma string também implementa IEnumerable)
+            foreach (char character in "Hello World".ToCharArray())
+            {
+                //Iterated over all the characters in the string
+            }
+
+            // Switch Case
+            // Um switch funciona com os tipos de dados byte, short, char, e int.
+            // Isto também funcional com tipos enumeradors (discutidos em Tipos Enum),
+            // A classe String, and a few special classes that wrap
+            // tipos primitívos: Character, Byte, Short, and Integer.
+            int month = 3;
+            string monthString;
+            switch (month)
+            {
+                case 1:
+                    monthString = "January";
+                    break;
+                case 2:
+                    monthString = "February";
+                    break;
+                case 3:
+                    monthString = "March";
+                    break;
+                // You can assign more than one case to an action
+                // But you can't add an action without a break before another case
+                // (if you want to do this, you would have to explicitly add a goto case x
+                case 6:
+                case 7:
+                case 8:
+                    monthString = "Summer time!!";
+                    break;
+                default:
+                    monthString = "Some other month";
+                    break;
+            }
+
+            ///////////////////////////////////////
+            // Converting Data Types And Typecasting
+            ///////////////////////////////////////
+
+            // Converting data
+
+            // Convert String To Integer
+            // this will throw a FormatException on failure
+            int.Parse("123");//returns an integer version of "123"
+
+            // try parse will default to type default on failure
+            // in this case: 0
+            int tryInt;
+            if (int.TryParse("123", out tryInt)) // Function is boolean
+                Console.WriteLine(tryInt);       // 123
+
+            // Convert Integer To String
+            // Convert class has a number of methods to facilitate conversions
+            Convert.ToString(123);
+            // or
+            tryInt.ToString();
+
+            // Casting
+            // Cast decimal 15 to a int
+            // and then implicitly cast to long
+            long x = (int) 15M;
+        }
+
+        ///////////////////////////////////////
+        // CLASSES - see definitions at end of file
+        ///////////////////////////////////////
+        public static void Classes()
+        {
+            // See Declaration of objects at end of file
+
+            // Use new to instantiate a class
+            Bicycle trek = new Bicycle();
+
+            // Call object methods
+            trek.SpeedUp(3); // You should always use setter and getter methods
+            trek.Cadence = 100;
+
+            // ToString is a convention to display the value of this Object.
+            Console.WriteLine("trek info: " + trek.Info());
+
+            // Instantiate a new Penny Farthing
+            PennyFarthing funbike = new PennyFarthing(1, 10);
+            Console.WriteLine("funbike info: " + funbike.Info());
+
+            Console.Read();
+        } // End main method
+
+        // CONSOLE ENTRY A console application must have a main method as an entry point
+        public static void Main(string[] args)
+        {
+            OtherInterestingFeatures();
+        }
+
+        //
+        // INTERESTING FEATURES
+        //
+
+        // DEFAULT METHOD SIGNATURES
+
+        public // Visibility
+        static // Allows for direct call on class without object
+        int // Return Type,
+        MethodSignatures(
+            int maxCount, // First variable, expects an int
+            int count = 0, // will default the value to 0 if not passed in
+            int another = 3,
+            params string[] otherParams // captures all other parameters passed to method
+        )
+        {
+            return -1;
+        }
+
+        // Methods can have the same name, as long as the signature is unique
+        // A method that differs only in return type is not unique
+        public static void MethodSignatures(
+            ref int maxCount, // Pass by reference
+            out int count)
+        {
+            count = 15; // out param must be assigned before control leaves the method
+        }
+
+        // GENERICS
+        // The classes for TKey and TValue is specified by the user calling this function.
+        // This method emulates the SetDefault of Python
+        public static TValue SetDefault<TKey, TValue>(
+            IDictionary<TKey, TValue> dictionary,
+            TKey key,
+            TValue defaultItem)
+        {
+            TValue result;
+            if (!dictionary.TryGetValue(key, out result))
+                return dictionary[key] = defaultItem;
+            return result;
+        }
+
+        // You can narrow down the objects that are passed in
+        public static void IterateAndPrint<T>(T toPrint) where T: IEnumerable<int>
+        {
+            // We can iterate, since T is a IEnumerable
+            foreach (var item in toPrint)
+                // Item is an int
+                Console.WriteLine(item.ToString());
+        }
+
+        public static void OtherInterestingFeatures()
+        {
+            // OPTIONAL PARAMETERS
+            MethodSignatures(3, 1, 3, "Some", "Extra", "Strings");
+            MethodSignatures(3, another: 3); // explicity set a parameter, skipping optional ones
+
+            // BY REF AND OUT PARAMETERS
+            int maxCount = 0, count; // ref params must have value
+            MethodSignatures(ref maxCount, out count);
+
+            // EXTENSION METHODS
+            int i = 3;
+            i.Print(); // Defined below
+
+            // NULLABLE TYPES - great for database interaction / return values
+            // any value type (i.e. not a class) can be made nullable by suffixing a ?
+            // <type>? <var name> = <value>
+            int? nullable = null; // short hand for Nullable<int>
+            Console.WriteLine("Nullable variable: " + nullable);
+            bool hasValue = nullable.HasValue; // true if not null
+
+            // ?? is syntactic sugar for specifying default value (coalesce)
+            // in case variable is null
+            int notNullable = nullable ?? 0; // 0
+
+            // IMPLICITLY TYPED VARIABLES - you can let the compiler work out what the type is:
+            var magic = "magic is a string, at compile time, so you still get type safety";
+            // magic = 9; will not work as magic is a string, not an int
+
+            // GENERICS
+            //
+            var phonebook = new Dictionary<string, string>() {
+                {"Sarah", "212 555 5555"} // Add some entries to the phone book
+            };
+
+            // Calling SETDEFAULT defined as a generic above
+            Console.WriteLine(SetDefault<string,string>(phonebook, "Shaun", "No Phone")); // No Phone
+            // nb, you don't need to specify the TKey and TValue since they can be
+            // derived implicitly
+            Console.WriteLine(SetDefault(phonebook, "Sarah", "No Phone")); // 212 555 5555
+
+            // LAMBDA EXPRESSIONS - allow you to write code in line
+            Func<int, int> square = (x) => x * x; // Last T item is the return value
+            Console.WriteLine(square(3)); // 9
+
+            // ERROR HANDLING - coping with an uncertain world
+            try
+            {
+                var funBike = PennyFarthing.CreateWithGears(6);
+
+                // will no longer execute because CreateWithGears throws an exception
+                string some = "";
+                if (true) some = null;
+                some.ToLower(); // throws a NullReferenceException
+            }
+            catch (NotSupportedException)
+            {
+                Console.WriteLine("Not so much fun now!");
+            }
+            catch (Exception ex) // catch all other exceptions
+            {
+                throw new ApplicationException("It hit the fan", ex);
+                // throw; // A rethrow that preserves the callstack
+            }
+            // catch { } // catch-all without capturing the Exception
+            finally
+            {
+                // executes after try or catch
+            }
+
+            // DISPOSABLE RESOURCES MANAGEMENT - let you handle unmanaged resources easily.
+            // Most of objects that access unmanaged resources (file handle, device contexts, etc.)
+            // implement the IDisposable interface. The using statement takes care of
+            // cleaning those IDisposable objects for you.
+            using (StreamWriter writer = new StreamWriter("log.txt"))
+            {
+                writer.WriteLine("Nothing suspicious here");
+                // At the end of scope, resources will be released.
+                // Even if an exception is thrown.
+            }
+
+            // PARALLEL FRAMEWORK
+            // http://blogs.msdn.com/b/csharpfaq/archive/2010/06/01/parallel-programming-in-net-framework-4-getting-started.aspx
+            var websites = new string[] {
+                "http://www.google.com", "http://www.reddit.com",
+                "http://www.shaunmccarthy.com"
+            };
+            var responses = new Dictionary<string, string>();
+
+            // Will spin up separate threads for each request, and join on them
+            // before going to the next step!
+            Parallel.ForEach(websites,
+                new ParallelOptions() {MaxDegreeOfParallelism = 3}, // max of 3 threads
+                website =>
+            {
+                // Do something that takes a long time on the file
+                using (var r = WebRequest.Create(new Uri(website)).GetResponse())
+                {
+                    responses[website] = r.ContentType;
+                }
+            });
+
+            // This won't happen till after all requests have been completed
+            foreach (var key in responses.Keys)
+                Console.WriteLine("{0}:{1}", key, responses[key]);
+
+            // DYNAMIC OBJECTS (great for working with other languages)
+            dynamic student = new ExpandoObject();
+            student.FirstName = "First Name"; // No need to define class first!
+
+            // You can even add methods (returns a string, and takes in a string)
+            student.Introduce = new Func<string, string>(
+                (introduceTo) => string.Format("Hey {0}, this is {1}", student.FirstName, introduceTo));
+            Console.WriteLine(student.Introduce("Beth"));
+
+            // IQUERYABLE<T> - almost all collections implement this, which gives you a lot of
+            // very useful Map / Filter / Reduce style methods
+            var bikes = new List<Bicycle>();
+            bikes.Sort(); // Sorts the array
+            bikes.Sort((b1, b2) => b1.Wheels.CompareTo(b2.Wheels)); // Sorts based on wheels
+            var result = bikes
+                .Where(b => b.Wheels > 3) // Filters - chainable (returns IQueryable of previous type)
+                .Where(b => b.IsBroken && b.HasTassles)
+                .Select(b => b.ToString()); // Map - we only this selects, so result is a IQueryable<string>
+
+            var sum = bikes.Sum(b => b.Wheels); // Reduce - sums all the wheels in the collection
+
+            // Create a list of IMPLICIT objects based on some parameters of the bike
+            var bikeSummaries = bikes.Select(b=>new { Name = b.Name, IsAwesome = !b.IsBroken && b.HasTassles });
+            // Hard to show here, but you get type ahead completion since the compiler can implicitly work
+            // out the types above!
+            foreach (var bikeSummary in bikeSummaries.Where(b => b.IsAwesome))
+                Console.WriteLine(bikeSummary.Name);
+
+            // ASPARALLEL
+            // And this is where things get wicked - combines linq and parallel operations
+            var threeWheelers = bikes.AsParallel().Where(b => b.Wheels == 3).Select(b => b.Name);
+            // this will happen in parallel! Threads will automagically be spun up and the
+            // results divvied amongst them! Amazing for large datasets when you have lots of
+            // cores
+
+            // LINQ - maps a store to IQueryable<T> objects, with delayed execution
+            // e.g. LinqToSql - maps to a database, LinqToXml maps to an xml document
+            var db = new BikeRepository();
+
+            // execution is delayed, which is great when querying a database
+            var filter = db.Bikes.Where(b => b.HasTassles); // no query run
+            if (42 > 6) // You can keep adding filters, even conditionally - great for "advanced search" functionality
+                filter = filter.Where(b => b.IsBroken); // no query run
+
+            var query = filter
+                .OrderBy(b => b.Wheels)
+                .ThenBy(b => b.Name)
+                .Select(b => b.Name); // still no query run
+
+            // Now the query runs, but opens a reader, so only populates are you iterate through
+            foreach (string bike in query)
+                Console.WriteLine(result);
+
+
+
+        }
+
+    } // End LearnCSharp class
+
+    // You can include other classes in a .cs file
+
+    public static class Extensions
+    {
+        // EXTENSION FUNCTIONS
+        public static void Print(this object obj)
+        {
+            Console.WriteLine(obj.ToString());
+        }
+    }
+
+    // Class Declaration Syntax:
+    // <public/private/protected/internal> class <class name>{
+    //    //data fields, constructors, functions all inside.
+    //    //functions are called as methods in Java.
+    // }
+
+    public class Bicycle
+    {
+        // Bicycle's Fields/Variables
+        public int Cadence // Public: Can be accessed from anywhere
+        {
+            get // get - define a method to retrieve the property
+            {
+                return _cadence;
+            }
+            set // set - define a method to set a proprety
+            {
+                _cadence = value; // Value is the value passed in to the setter
+            }
+        }
+        private int _cadence;
+
+        protected virtual int Gear // Protected: Accessible from the class and subclasses
+        {
+            get; // creates an auto property so you don't need a member field
+            set;
+        }
+
+        internal int Wheels // Internal: Accessible from within the assembly
+        {
+            get;
+            private set; // You can set modifiers on the get/set methods
+        }
+
+        int _speed; // Everything is private by default: Only accessible from within this class.
+                    // can also use keyword private
+        public string Name { get; set; }
+
+        // Enum is a value type that consists of a set of named constants
+        // It is really just mapping a name to a value (an int, unless specified otherwise).
+        // The approved types for an enum are byte, sbyte, short, ushort, int, uint, long, or ulong.
+        // An enum can't contain the same value twice.
+        public enum BikeBrand
+        {
+            AIST,
+            BMC,
+            Electra = 42, //you can explicitly set a value to a name
+            Gitane // 43
+        }
+        // We defined this type inside a Bicycle class, so it is a nested type
+        // Code outside of this class should reference this type as Bicycle.Brand
+
+        public BikeBrand Brand; // After declaring an enum type, we can declare the field of this type
+
+        // Decorate an enum with the FlagsAttribute to indicate that multiple values can be switched on
+        [Flags] // Any class derived from Attribute can be used to decorate types, methods, parameters etc
+        public enum BikeAccessories
+        {
+            None = 0,
+            Bell = 1,
+            MudGuards = 2, // need to set the values manually!
+            Racks = 4,
+            Lights = 8,
+            FullPackage = Bell | MudGuards | Racks | Lights
+        }
+
+        // Usage: aBike.Accessories.HasFlag(Bicycle.BikeAccessories.Bell)
+        // Before .NET 4: (aBike.Accessories & Bicycle.BikeAccessories.Bell) == Bicycle.BikeAccessories.Bell
+        public BikeAccessories Accessories { get; set; }
+
+        // Static members belong to the type itself rather then specific object.
+        // You can access them without a reference to any object:
+        // Console.WriteLine("Bicycles created: " + Bicycle.bicyclesCreated);
+        public static int BicyclesCreated { get; set; }
+
+        // readonly values are set at run time
+        // they can only be assigned upon declaration or in a constructor
+        readonly bool _hasCardsInSpokes = false; // read-only private
+
+        // Constructors are a way of creating classes
+        // This is a default constructor
+        public Bicycle()
+        {
+            this.Gear = 1; // you can access members of the object with the keyword this
+            Cadence = 50;  // but you don't always need it
+            _speed = 5;
+            Name = "Bontrager";
+            Brand = BikeBrand.AIST;
+            BicyclesCreated++;
+        }
+
+        // This is a specified constructor (it contains arguments)
+        public Bicycle(int startCadence, int startSpeed, int startGear,
+                       string name, bool hasCardsInSpokes, BikeBrand brand)
+            : base() // calls base first
+        {
+            Gear = startGear;
+            Cadence = startCadence;
+            _speed = startSpeed;
+            Name = name;
+            _hasCardsInSpokes = hasCardsInSpokes;
+            Brand = brand;
+        }
+
+        // Constructors can be chained
+        public Bicycle(int startCadence, int startSpeed, BikeBrand brand) :
+            this(startCadence, startSpeed, 0, "big wheels", true, brand)
+        {
+        }
+
+        // Function Syntax:
+        // <public/private/protected> <return type> <function name>(<args>)
+
+        // classes can implement getters and setters for their fields
+        // or they can implement properties (this is the preferred way in C#)
+
+        // Method parameters can have default values.
+        // In this case, methods can be called with these parameters omitted
+        public void SpeedUp(int increment = 1)
+        {
+            _speed += increment;
+        }
+
+        public void SlowDown(int decrement = 1)
+        {
+            _speed -= decrement;
+        }
+
+        // properties get/set values
+        // when only data needs to be accessed, consider using properties.
+        // properties may have either get or set, or both
+        private bool _hasTassles; // private variable
+        public bool HasTassles // public accessor
+        {
+            get { return _hasTassles; }
+            set { _hasTassles = value; }
+        }
+
+        // You can also define an automatic property in one line
+        // this syntax will create a backing field automatically.
+        // You can set an access modifier on either the getter or the setter (or both)
+        // to restrict its access:
+        public bool IsBroken { get; private set; }
+
+        // Properties can be auto-implemented
+        public int FrameSize
+        {
+            get;
+            // you are able to specify access modifiers for either get or set
+            // this means only Bicycle class can call set on Framesize
+            private set;
+        }
+
+        // It's also possible to define custom Indexers on objects.
+        // All though this is not entirely useful in this example, you
+        // could do bicycle[0] which yields "chris" to get the first passenger or
+        // bicycle[1] = "lisa" to set the passenger. (of this apparent quattrocycle)
+        private string[] passengers = { "chris", "phil", "darren", "regina" };
+
+        public string this[int i]
+        {
+            get {
+                return passengers[i];
+            }
+
+            set {
+                return passengers[i] = value;
+            }
+        }
+
+        //Method to display the attribute values of this Object.
+        public virtual string Info()
+        {
+            return "Gear: " + Gear +
+                    " Cadence: " + Cadence +
+                    " Speed: " + _speed +
+                    " Name: " + Name +
+                    " Cards in Spokes: " + (_hasCardsInSpokes ? "yes" : "no") +
+                    "\n------------------------------\n"
+                    ;
+        }
+
+        // Methods can also be static. It can be useful for helper methods
+        public static bool DidWeCreateEnoughBycles()
+        {
+            // Within a static method, we only can reference static class members
+            return BicyclesCreated > 9000;
+        } // If your class only needs static members, consider marking the class itself as static.
+
+
+    } // end class Bicycle
+
+    // PennyFarthing is a subclass of Bicycle
+    class PennyFarthing : Bicycle
+    {
+        // (Penny Farthings are those bicycles with the big front wheel.
+        // They have no gears.)
+
+        // calling parent constructor
+        public PennyFarthing(int startCadence, int startSpeed) :
+            base(startCadence, startSpeed, 0, "PennyFarthing", true, BikeBrand.Electra)
+        {
+        }
+
+        protected override int Gear
+        {
+            get
+            {
+                return 0;
+            }
+            set
+            {
+                throw new InvalidOperationException("You can't change gears on a PennyFarthing");
+            }
+        }
+
+        public static PennyFarthing CreateWithGears(int gears)
+        {
+            var penny = new PennyFarthing(1, 1);
+            penny.Gear = gears; // Oops, can't do this!
+            return penny;
+        }
+
+        public override string Info()
+        {
+            string result = "PennyFarthing bicycle ";
+            result += base.ToString(); // Calling the base version of the method
+            return result;
+        }
+    }
+
+    // Interfaces only contain signatures of the members, without the implementation.
+    interface IJumpable
+    {
+        void Jump(int meters); // all interface members are implicitly public
+    }
+
+    interface IBreakable
+    {
+        bool Broken { get; } // interfaces can contain properties as well as methods & events
+    }
+
+    // Class can inherit only one other class, but can implement any amount of interfaces
+    class MountainBike : Bicycle, IJumpable, IBreakable
+    {
+        int damage = 0;
+
+        public void Jump(int meters)
+        {
+            damage += meters;
+        }
+
+        public bool Broken
+        {
+            get
+            {
+                return damage > 100;
+            }
+        }
+    }
+
+    /// <summary>
+    /// Used to connect to DB for LinqToSql example.
+    /// EntityFramework Code First is awesome (similar to Ruby's ActiveRecord, but bidirectional)
+    /// http://msdn.microsoft.com/en-us/data/jj193542.aspx
+    /// </summary>
+    public class BikeRepository : DbContext
+    {
+        public BikeRepository()
+            : base()
+        {
+        }
+
+        public DbSet<Bicycle> Bikes { get; set; }
+    }
+} // End Namespace
+```
+
+## Topics Not Covered
+
+ * Attributes
+ * async/await, yield, pragma directives
+ * Web Development
+ 	* ASP.NET MVC & WebApi (new)
+ 	* ASP.NET Web Forms (old)
+ 	* WebMatrix (tool)
+ * Desktop Development
+ 	* Windows Presentation Foundation (WPF) (new)
+ 	* Winforms (old)
+
+## Further Reading
+
+ * [DotNetPerls](http://www.dotnetperls.com)
+ * [C# in Depth](http://manning.com/skeet2)
+ * [Programming C#](http://shop.oreilly.com/product/0636920024064.do)
+ * [LINQ](http://shop.oreilly.com/product/9780596519254.do)
+ * [MSDN Library](http://msdn.microsoft.com/en-us/library/618ayhy6.aspx)
+ * [ASP.NET MVC Tutorials](http://www.asp.net/mvc/tutorials)
+ * [ASP.NET Web Matrix Tutorials](http://www.asp.net/web-pages/tutorials)
+ * [ASP.NET Web Forms Tutorials](http://www.asp.net/web-forms/tutorials)
+ * [Windows Forms Programming in C#](http://www.amazon.com/Windows-Forms-Programming-Chris-Sells/dp/0321116208)
+ * [C# Coding Conventions](http://msdn.microsoft.com/en-us/library/vstudio/ff926074.aspx)
diff --git a/pt-br/git-pt.html.markdown b/pt-br/git-pt.html.markdown
index 981da503..ea3570d6 100644
--- a/pt-br/git-pt.html.markdown
+++ b/pt-br/git-pt.html.markdown
@@ -5,8 +5,12 @@ lang: pt-br
 filename: LearnGit.txt
 contributors:
     - ["Jake Prather", "http://github.com/JakeHP"]
+    - ["Leo Rudberg" , "http://github.com/LOZORD"]
+    - ["Betsy Lorton" , "http://github.com/schbetsy"]
+    - ["Bruno Volcov", "http://github.com/volcov"]
 translators:
   - ["Suzane Sant Ana", "http://github.com/suuuzi"]
+  - ["Bruno Volcov", "http://github.com/volcov"]
 ---
 
 Git é um sistema distribuido de gestão para código fonte e controle de versões.
@@ -84,6 +88,11 @@ Um *branch* é essencialmente uma referência que aponta para o último *commit*
 efetuado. Na medida que são feitos novos commits, esta referência é atualizada
 automaticamente e passa a apontar para o commit mais recente.
 
+### *Tag*
+
+Uma tag é uma marcação em um ponto específico da história. Geralmente as
+pessoas usam esta funcionalidade para marcar pontos de release (v2.0, e por aí vai)
+
 ### *HEAD* e *head* (componentes do diretório .git)
 
 *HEAD* é a referência que aponta para o *branch* em uso. Um repositório só tem
@@ -196,6 +205,29 @@ $ git branch -m myBranchName myNewBranchName
 $ git branch myBranchName --edit-description
 ```
 
+### Tag
+
+Gerencia as *tags*
+
+```bash
+# Listar tags
+$ git tag
+# Criar uma tag anotada.
+# O parâmetro -m define uma mensagem, que é armazenada com a tag.
+# Se você não especificar uma mensagem para uma tag anotada,
+# o Git vai rodar seu editor de texto para você digitar alguma coisa.
+$ git tag -a v2.0 -m 'minha versão 2.0'
+# Mostrar informações sobre a tag
+# O comando mostra a informação da pessoa que criou a tag,
+# a data de quando o commit foi taggeado,
+# e a mensagem antes de mostrar a informação do commit.
+$ git show v2.0
+# Enviar uma tag para o repositório remoto
+$ git push origin v2.0
+# Enviar várias tags para o repositório remoto
+$ git push origin --tags
+```
+
 ### checkout
 
 Atualiza todos os arquivos no diretório do projeto para que fiquem iguais
diff --git a/pt-br/hy-pt.html.markdown b/pt-br/hy-pt.html.markdown
index 4230579d..5fa4df75 100644
--- a/pt-br/hy-pt.html.markdown
+++ b/pt-br/hy-pt.html.markdown
@@ -171,6 +171,6 @@ Este tutorial é apenas uma introdução básica para hy/lisp/python.
 
 Docs Hy: [http://hy.readthedocs.org](http://hy.readthedocs.org)
 
-Repo Hy no Github: [http://github.com/hylang/hy](http://github.com/hylang/hy)
+Repo Hy no GitHub: [http://github.com/hylang/hy](http://github.com/hylang/hy)
 
 Acesso ao freenode irc com #hy, hashtag no twitter: #hylang
diff --git a/pt-br/java-pt.html.markdown b/pt-br/java-pt.html.markdown
index 3c9512aa..db087a5f 100644
--- a/pt-br/java-pt.html.markdown
+++ b/pt-br/java-pt.html.markdown
@@ -214,42 +214,42 @@ public class LearnJava {
             //Iteração feita 10 vezes, fooFor 0->9
         }
         System.out.println("Valor do fooFor: " + fooFor);
-        
-        // O Loop For Each 
+
+        // O Loop For Each
         // Itera automaticamente por um array ou lista de objetos.
         int[] fooList = {1,2,3,4,5,6,7,8,9};
         //estrutura do loop for each => for(<objeto> : <array_de_objeto>)
         //lê-se: para cada objeto no array
         //nota: o tipo do objeto deve ser o mesmo do array.
-        
+
         for( int bar : fooList ){
             //System.out.println(bar);
             //Itera 9 vezes e imprime 1-9 em novas linhas
         }
-        
+
         // Switch
         // Um switch funciona com os tipos de dados: byte, short, char e int
         // Ele também funciona com tipos enumerados (vistos em tipos Enum)
         // como também a classe String e algumas outras classes especiais
         // tipos primitivos: Character, Byte, Short e Integer
-        int mes = 3; 
-        String mesString; 
-        switch (mes){ 
+        int mes = 3;
+        String mesString;
+        switch (mes){
             case 1:
-                    mesString = "Janeiro"; 
+                    mesString = "Janeiro";
                     break;
             case 2:
-                    mesString = "Fevereiro"; 
+                    mesString = "Fevereiro";
                     break;
             case 3:
-                    mesString = "Março"; 
+                    mesString = "Março";
                     break;
             default:
-                    mesString = "Algum outro mês"; 
+                    mesString = "Algum outro mês";
                     break;
         }
         System.out.println("Resultado do Switch: " + mesString);
-        
+
         // Condição de forma abreviada.
         // Você pode usar o operador '?' para atribuições rápidas ou decisões lógicas.
         // Lê-se "Se (declaração) é verdadeira, use <primeiro valor>
@@ -287,9 +287,9 @@ public class LearnJava {
         // Classes e Métodos
         ///////////////////////////////////////
 
-        System.out.println("\n->Classes e Métodos"); 
+        System.out.println("\n->Classes e Métodos");
 
-        // (segue a definição da classe Bicicleta) 
+        // (segue a definição da classe Bicicleta)
 
         // Use o new para instanciar uma classe
         Bicicleta caloi = new Bicicleta(); // Objeto caloi criado.
@@ -318,9 +318,9 @@ class Bicicleta {
 
     // Atributos/Variáveis da classe Bicicleta.
     public int ritmo;          // Public: Pode ser acessada em qualquer lugar.
-    private int velocidade;    // Private: Apenas acessível a classe. 
+    private int velocidade;    // Private: Apenas acessível a classe.
     protected int catraca; // Protected: Acessível a classe e suas subclasses.
-    String nome;               // default: Apenas acessível ao pacote. 
+    String nome;               // default: Apenas acessível ao pacote.
 
     // Construtores são uma forma de criação de classes
     // Este é o construtor padrão.
@@ -388,7 +388,7 @@ class Bicicleta {
 // Velocipede é uma subclasse de bicicleta.
 class Velocipede extends Bicicleta {
     // (Velocípedes são bicicletas com rodas dianteiras grandes
-    // Elas não possuem catraca.) 
+    // Elas não possuem catraca.)
 
     public Velocipede(int ritmoInicial, int velocidadeInicial){
         // Chame o construtor do pai (construtor de Bicicleta) com o comando super.
@@ -626,11 +626,11 @@ Os links fornecidos aqui abaixo são apenas para ter uma compreensão do tema, u
 
 Outros tópicos para pesquisar:
 
-* [Tutorial Java para Sun Trail / Oracle](http://docs.oracle.com/javase/tutorial/index.html) 
+* [Tutorial Java para Sun Trail / Oracle](http://docs.oracle.com/javase/tutorial/index.html)
 
 * [Modificadores de acesso do Java](http://docs.oracle.com/javase/tutorial/java/javaOO/accesscontrol.html)
 
-* [Coceitos de Programação Orientada à Objetos](http://docs.oracle.com/javase/tutorial/java/concepts/index.html): 
+* [Coceitos de Programação Orientada à Objetos](http://docs.oracle.com/javase/tutorial/java/concepts/index.html):
     * [Herança](http://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html)
     * [Polimorfismo](http://docs.oracle.com/javase/tutorial/java/IandI/polymorphism.html)
     * [Abstração](http://docs.oracle.com/javase/tutorial/java/IandI/abstract.html)
@@ -646,3 +646,9 @@ Outros tópicos para pesquisar:
 Livros:
 
 * [Use a cabeça, Java] (http://www.headfirstlabs.com/books/hfjava/)
+
+Apostila:
+
+* [Java e Orientação a Objetos] (http://www.caelum.com.br/apostila-java-orientacao-objetos/)
+
+* [Java para Desenvolvimento Web] (https://www.caelum.com.br/apostila-java-web/)
diff --git a/pt-br/markdown-pt.html.markdown b/pt-br/markdown-pt.html.markdown
index 4030ce3c..f22093f9 100644
--- a/pt-br/markdown-pt.html.markdown
+++ b/pt-br/markdown-pt.html.markdown
@@ -56,7 +56,7 @@ __E este também está._
 *--Danouse! Este também__*
 
 <!-- Em GitHub Flavored Markdown, que é usado para processar arquivos Markdown 
-Github, nós também temos: --> 
+GitHub, nós também temos: --> 
 
 ~~Este texto é processado com tachado.~~
 
@@ -148,7 +148,7 @@ dentro do seu código -->
 
 John não sabia nem o que o função 'goto()' fazia!
 
-<!-- Em Github Flavored Markdown, você pode usar uma sintaxe especial para o código -->
+<!-- Em GitHub Flavored Markdown, você pode usar uma sintaxe especial para o código -->
 
 \`\`\`ruby <!-- exceto remover essas barras invertidas quando você faz isso, apenas ```
 ruby! --> 
@@ -157,7 +157,7 @@ def foobar
 end
 \`\`\` <!-- Aqui também, não barras invertidas, apenas ``` -->
 
-<-- O texto acima não requer recuo, mas o Github vai usar a sintaxe 
+<-- O texto acima não requer recuo, mas o GitHub vai usar a sintaxe 
 destacando do idioma que você especificar após a ``` -->
 
 <!-- Regra Horizontal (<hr />) --> 
@@ -230,7 +230,7 @@ Quero digitar * Este texto entre asteriscos *, mas eu não quero que ele seja
 em itálico, então eu faço o seguinte: \*Este texto entre asteriscos \*.
 
 <!-- Tabelas --> 
-<!-- Tabelas estão disponíveis apenas no Github Flavored Markdown e são ligeiramente 
+<!-- Tabelas estão disponíveis apenas no GitHub Flavored Markdown e são ligeiramente 
 complicadas, mas se você realmente quer: -->
 
 | Col1         | Col2     | Col3          |
diff --git a/pt-br/paren-pt.html.markdown b/pt-br/paren-pt.html.markdown
new file mode 100644
index 00000000..464a69d2
--- /dev/null
+++ b/pt-br/paren-pt.html.markdown
@@ -0,0 +1,196 @@
+---
+language: Paren
+filename: learnparen-pt.paren
+contributors:
+  - ["KIM Taegyoon", "https://github.com/kimtg"]
+translators:
+    - ["Claudson Martins", "https://github.com/claudsonm"]
+lang: pt-br
+---
+
+[Paren](https://bitbucket.org/ktg/paren) é um dialeto do Lisp. É projetado para ser uma linguagem embutida.
+
+Alguns exemplos foram retirados de <http://learnxinyminutes.com/docs/racket/>.
+
+```scheme
+;;; Comentários
+# Comentários
+
+;; Comentários de única linha começam com um ponto e vírgula ou cerquilha
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 1. Tipos de Dados Primitivos e Operadores
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;;; Números
+123 ; inteiro
+3.14 ; double
+6.02e+23 ; double
+(int 3.14) ; => 3 : inteiro
+(double 123) ; => 123 : double
+
+;; O uso de funções é feito da seguinte maneira (f x y z ...)
+;; onde f é uma função e x, y, z, ... são os operandos
+;; Se você quiser criar uma lista literal de dados, use (quote) para impedir
+;; que sejam interpretados
+(quote (+ 1 2)) ; => (+ 1 2)
+;; Agora, algumas operações aritméticas
+(+ 1 1)  ; => 2
+(- 8 1)  ; => 7
+(* 10 2) ; => 20
+(^ 2 3) ; => 8
+(/ 5 2) ; => 2
+(% 5 2) ; => 1
+(/ 5.0 2) ; => 2.5
+
+;;; Booleanos
+true ; para verdadeiro
+false ; para falso
+(! true) ; => falso
+(&& true false (prn "não chega aqui")) ; => falso
+(|| false true (prn "não chega aqui")) ; => verdadeiro
+
+;;; Caracteres são inteiros.
+(char-at "A" 0) ; => 65
+(chr 65) ; => "A"
+
+;;; Strings são arrays de caracteres de tamanho fixo.
+"Olá, mundo!"
+"Sebastião \"Tim\" Maia"   ; Contra-barra é um caractere de escape
+"Foo\tbar\r\n" ; Inclui os escapes da linguagem C: \t \r \n
+
+;; Strings podem ser concatenadas também!
+(strcat "Olá " "mundo!") ; => "Olá mundo!"
+
+;; Uma string pode ser tratada como uma lista de caracteres
+(char-at "Abacaxi" 0) ; => 65
+
+;; A impressão é muito fácil
+(pr "Isso é" "Paren. ") (prn "Prazer em conhecê-lo!")
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 2. Variáveis
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; Você pode criar ou definir uma variável usando (set)
+;; o nome de uma variável pode conter qualquer caracter, exceto: ();#"
+(set alguma-variavel 5) ; => 5
+alguma-variavel ; => 5
+
+;; Acessar uma variável ainda não atribuída gera uma exceção
+; x ; => Unknown variable: x : nil
+
+;; Ligações locais: Utiliza cálculo lambda! 
+;; 'a' e 'b' estão ligados a '1' e '2' apenas dentro de (fn ...)
+((fn (a b) (+ a b)) 1 2) ; => 3
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 3. Coleções
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;;; Listas
+
+;; Listas são estruturas de dados semelhantes a vetores. (A classe de comportamento é O(1).)
+(cons 1 (cons 2 (cons 3 (list)))) ; => (1 2 3)
+;; 'list' é uma variação conveniente para construir listas
+(list 1 2 3) ; => (1 2 3)
+;; Um quote também pode ser usado para uma lista de valores literais
+(quote (+ 1 2)) ; => (+ 1 2)
+
+;; Você ainda pode utilizar 'cons' para adicionar um item ao início da lista
+(cons 0 (list 1 2 3)) ; => (0 1 2 3)
+
+;; Listas são um tipo muito básico, portanto existe *enorme* funcionalidade
+;; para elas, veja alguns exemplos:
+(map inc (list 1 2 3))          ; => (2 3 4)
+(filter (fn (x) (== 0 (% x 2))) (list 1 2 3 4))    ; => (2 4)
+(length (list 1 2 3 4))     ; => 4
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 3. Funções
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;; Use 'fn' para criar funções.
+;; Uma função sempre retorna o valor de sua última expressão
+(fn () "Olá Mundo") ; => (fn () Olá Mundo) : fn
+
+;; Use parênteses para chamar todas as funções, incluindo uma expressão lambda
+((fn () "Olá Mundo")) ; => "Olá Mundo"
+
+;; Atribuir uma função a uma variável
+(set ola-mundo (fn () "Olá Mundo"))
+(ola-mundo) ; => "Olá Mundo"
+
+;; Você pode encurtar isso utilizando a definição de função açúcar sintático:
+(defn ola-mundo2 () "Olá Mundo")
+
+;; Os () acima é a lista de argumentos para a função
+(set ola
+  (fn (nome)
+    (strcat "Olá " nome)))
+(ola "Steve") ; => "Olá Steve"
+
+;; ... ou equivalente, usando a definição açucarada:
+(defn ola2 (nome)
+  (strcat "Olá " name))
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 4. Igualdade
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;; Para números utilize '=='
+(== 3 3.0) ; => verdadeiro
+(== 2 1) ; => falso
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 5. Controle de Fluxo
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;;; Condicionais
+
+(if true 				; Testa a expressão
+    "isso é verdade"	; Então expressão
+    "isso é falso") 	; Senão expressão
+; => "isso é verdade"
+
+;;; Laços de Repetição
+
+;; O laço for é para número
+;; (for SÍMBOLO INÍCIO FIM SALTO EXPRESSÃO ..)
+(for i 0 10 2 (pr i "")) ; => Imprime 0 2 4 6 8 10
+(for i 0.0 10 2.5 (pr i "")) ; => Imprime 0 2.5 5 7.5 10
+
+;; Laço while
+((fn (i)
+  (while (< i 10)
+    (pr i)
+    (++ i))) 0) ; => Imprime 0123456789
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 6. Mutação
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;; Use 'set' para atribuir um novo valor a uma variável ou local
+(set n 5) ; => 5
+(set n (inc n)) ; => 6
+n ; => 6
+(set a (list 1 2)) ; => (1 2)
+(set (nth 0 a) 3) ; => 3
+a ; => (3 2)
+
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+;; 7. Macros
+;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;
+
+;; Macros lhe permitem estender a sintaxe da linguagem.
+;; Os macros no Paren são fáceis.
+;; Na verdade, (defn) é um macro.
+(defmacro setfn (nome ...) (set nome (fn ...)))
+(defmacro defn (nome ...) (def nome (fn ...)))
+
+;; Vamos adicionar uma notação infixa
+(defmacro infix (a op ...) (op a ...))
+(infix 1 + 2 (infix 3 * 4)) ; => 15
+
+;; Macros não são higiênicos, você pode sobrescrever as variáveis já existentes!
+;; Eles são transformações de códigos.
+```
diff --git a/pt-br/ruby-ecosystem-pt.html.markdown b/pt-br/ruby-ecosystem-pt.html.markdown
new file mode 100644
index 00000000..da4f6f37
--- /dev/null
+++ b/pt-br/ruby-ecosystem-pt.html.markdown
@@ -0,0 +1,147 @@
+---
+category: tool
+tool: ruby ecosystem
+contributors:
+    - ["Jon Smock", "http://github.com/jonsmock"]
+    - ["Rafal Chmiel", "http://github.com/rafalchmiel"]
+translators:
+    - ["Claudson Martins", "http://github.com/claudsonm"]
+lang: pt-br
+
+---
+
+Pessoas utilizando Ruby geralmente têm uma forma de instalar diferentes versões
+do Ruby, gerenciar seus pacotes (ou gemas) e as dependências das gemas.
+
+## Gerenciadores Ruby
+
+Algumas plataformas possuem o Ruby pré-instalado ou disponível como um pacote.
+A maioria dos "rubistas" não os usam, e se usam, é apenas para inicializar outro
+instalador ou implementação do Ruby. Ao invés disso, rubistas tendêm a instalar
+um gerenciador para instalar e alternar entre diversas versões do Ruby e seus
+ambientes de projeto.
+
+Abaixo estão os gerenciadores Ruby mais populares:
+
+* [RVM](https://rvm.io/) - Instala e alterna entre os rubies. RVM também possui
+  o conceito de gemsets para isolar os ambientes dos projetos completamente.
+* [ruby-build](https://github.com/sstephenson/ruby-build) - Apenas instala os
+  rubies. Use este para um melhor controle sobre a instalação de seus rubies.
+* [rbenv](https://github.com/sstephenson/rbenv) - Apenas alterna entre os rubies.
+  Usado com o ruby-build. Use este para um controle mais preciso sobre a forma
+  como os rubies são carregados.
+* [chruby](https://github.com/postmodern/chruby) - Apenas alterna entre os rubies.
+  A concepção é bastante similar ao rbenv. Sem grandes opções sobre como os
+  rubies são instalados.
+
+## Versões do Ruby
+
+O Ruby foi criado por Yukihiro "Matz" Matsumoto, que continua a ser uma espécie
+de [BDFL](https://en.wikipedia.org/wiki/Benevolent_Dictator_for_Life), embora
+isso esteja mudando recentemente. Como resultado, a implementação de referência
+do Ruby é chamada de MRI (Matz' Reference Implementation), e quando você ver uma
+versão do Ruby, ela está se referindo a versão de lançamento do MRI.
+
+As três principais versões do Ruby em uso são:
+
+* 2.0.0 - Lançada em Fevereiro de 2013. Maioria das principais bibliotecas e 
+  suporte a frameworks 2.0.0.
+* 1.9.3 - Lançada em Outubro de 2011. Está é a versão mais utilizada pelos rubistas
+  atualmente. Também [aposentada](https://www.ruby-lang.org/en/news/2015/02/23/support-for-ruby-1-9-3-has-ended/).
+* 1.8.7 - O Ruby 1.8.7 foi
+  [aposentado](http://www.ruby-lang.org/en/news/2013/06/30/we-retire-1-8-7/).
+
+A diferença entre a versão 1.8.7 para 1.9.x é muito maior do que a da 1.9.3 para
+a 2.0.0. Por exemplo, a série 1.9 introduziu encodes e uma VM bytecode. Ainda
+existem projetos na versão 1.8.7, mas eles estão tornando-se uma pequena minoria
+pois a maioria da comunidade migrou para a versão, pelo menos, 1.9.2 ou 1.9.3.
+
+## Implementações Ruby
+
+O ecossistema Ruby conta com várias diferentes implementações do Ruby, cada uma
+com pontos fortes e estados de compatibilidade. Para ser claro, as diferentes
+implementações são escritas em diferentes linguagens, mas *todas elas são Ruby*.
+Cada implementação possui hooks especiais e recursos extra, mas todas elas
+executam arquivos normais do Ruby tranquilamente. Por exemplo, JRuby é escrita
+em Java, mas você não precisa saber Java para utilizá-la.
+
+Muito maduras/compatíveis:
+
+* [MRI](https://github.com/ruby/ruby) - Escrita em C, esta é a implementação de
+  referência do Ruby. Por definição, é 100% compatível (consigo mesma). Todos os
+  outros rubies mantêm compatibilidade com a MRI (veja [RubySpec](#rubyspec) abaixo).
+* [JRuby](http://jruby.org/) - Escrita em Java e Ruby, esta implementação
+  robusta é um tanto rápida. Mais importante ainda, o ponto forte do JRuby é a
+  interoperabilidade com JVM/Java, aproveitando ferramentas JVM, projetos, e
+  linguagens existentes.
+* [Rubinius](http://rubini.us/) - Escrita principalmente no próprio Ruby, com
+  uma VM bytecode em C++. Também madura e rápida. Por causa de sua implementação
+  em Ruby, ela expõe muitos recursos da VM na rubyland.
+
+Medianamente maduras/compatíveis:
+
+* [Maglev](http://maglev.github.io/) - Construída em cima da Gemstone, uma
+  máquina virtual Smalltalk. O Smalltalk possui algumas ferramentas impressionantes,
+  e este projeto tenta trazer isso para o desenvolvimento Ruby.
+* [RubyMotion](http://www.rubymotion.com/) - Traz o Ruby para o desenvolvimento iOS.
+
+Pouco maduras/compatíveis:
+
+* [Topaz](http://topazruby.com/) - Escrita em RPython (usando o conjunto de
+  ferramentas PyPy), Topaz é bastante jovem e ainda não compatível. Parece ser
+  promissora como uma implementação Ruby de alta performance.
+* [IronRuby](http://ironruby.net/) - Escrita em C# visando a plataforma .NET,
+  o trabalho no IronRuby parece ter parado desde que a Microsoft retirou seu apoio.
+
+Implementações Ruby podem ter seus próprios números de lançamento, mas elas
+sempre focam em uma versão específica da MRI para compatibilidade. Diversas
+implementações têm a capacidade de entrar em diferentes modos (1.8 ou 1.9, por
+exemplo) para especificar qual versão da MRI focar.
+
+## RubySpec
+
+A maioria das implementações Ruby dependem fortemente da [RubySpec](http://rubyspec.org/).
+Ruby não tem uma especificação oficial, então a comunidade tem escrito
+especificações executáveis em Ruby para testar a compatibilidade de suas
+implementações com a MRI.
+
+## RubyGems
+
+[RubyGems](http://rubygems.org/) é um gerenciador de pacotes para Ruby mantido
+pela comunidade. RubyGems vem com o Ruby, portanto não é preciso baixar separadamente.
+
+Os pacotes do Ruby são chamados de "gemas", e elas podem ser hospedadas pela 
+comunidade em RubyGems.org. Cada gema contém seu código-fonte e alguns metadados,
+incluindo coisas como versão, dependências, autor(es) e licença(s).
+
+## Bundler
+
+[Bundler](http://bundler.io/) é um gerenciador de dependências para as gemas.
+Ele usa a Gemfile de um projeto para encontrar dependências, e então busca as
+dependências dessas dependências de forma recursiva. Ele faz isso até que todas 
+as dependências sejam resolvidas e baixadas, ou para se encontrar um conflito.
+
+O Bundler gerará um erro se encontrar um conflito entre dependências. Por exemplo, 
+se a gema A requer versão 3 ou maior que a gema Z, mas a gema B requer a versão 
+2, o Bundler irá notificá-lo que há um conflito. Isso se torna extremamente útil
+quando diversas gemas começam a referenciar outras gemas (que referem-se a outras
+gemas), o que pode formar uma grande cascata de dependências a serem resolvidas.
+
+# Testes
+
+Testes são uma grande parte da cultura do Ruby. O Ruby vem com o seu próprio 
+framework de teste de unidade chamado minitest (ou TestUnit para Ruby versão 1.8.x). 
+Existem diversas bibliotecas de teste com diferentes objetivos.
+
+* [TestUnit](http://ruby-doc.org/stdlib-1.8.7/libdoc/test/unit/rdoc/Test/Unit.html) - 
+  Framework de testes "Unit-style" para o Ruby 1.8 (built-in)
+* [minitest](http://ruby-doc.org/stdlib-2.0.0/libdoc/minitest/rdoc/MiniTest.html) - 
+  Framework de testes para o Ruby 1.9/2.0 (built-in)
+* [RSpec](http://rspec.info/) - Um framework de testes que foca na expressividade
+* [Cucumber](http://cukes.info/) - Um framework de testes BDD que analisa testes Gherkin formatados
+
+## Seja Legal
+
+A comunidade Ruby orgulha-se de ser uma comunidade aberta, diversa, e receptiva.
+O próprio Matz é extremamente amigável, e a generosidade dos rubistas em geral
+é incrível.
diff --git a/pt-br/yaml-pt.html.markdown b/pt-br/yaml-pt.html.markdown
new file mode 100644
index 00000000..341ae675
--- /dev/null
+++ b/pt-br/yaml-pt.html.markdown
@@ -0,0 +1,142 @@
+---
+language: yaml
+contributors:
+  - ["Adam Brenecki", "https://github.com/adambrenecki"]
+translators:
+  - ["Rodrigo Russo", "https://github.com/rodrigozrusso"]
+filename: learnyaml-pt.yaml
+lang: pt-br
+---
+
+YAML é uma linguagem de serialização de dados projetado para ser diretamente gravável e
+legível por seres humanos.
+
+É um estrito subconjunto de JSON, com a adição de sintaticamente
+novas linhas e recuo significativos, como Python. Ao contrário de Python, no entanto,
+YAML não permite caracteres de tabulação literais em tudo.
+
+```yaml
+# Commentários em YAML são como este.
+
+###################
+# TIPOS ESCALARES #
+###################
+
+# Nosso objeto raiz (que continua por todo o documento) será um mapa,
+# o que equivale a um dicionário, hash ou objeto em outras linguagens.
+chave: valor
+outra_chave: Outro valor vai aqui.
+u_valor_numerico: 100
+notacao_cientifica: 1e+12
+boleano: true
+valor_nulo: null
+chave com espaco: valor
+# Observe que strings não precisam de aspas. Porém, elas podem ter.
+porem: "Uma string, entre aspas."
+"Chaves podem estar entre aspas tambem.": "É útil se você quiser colocar um ':' na sua chave."
+
+# Seqüências de várias linhas podem ser escritos como um 'bloco literal' (utilizando |),
+# ou em um 'bloco compacto' (utilizando '>').
+bloco_literal: |
+    Todo esse bloco de texto será o valor da chave 'bloco_literal',
+    preservando a quebra de com linhas.
+
+    O literal continua até de-dented, e a primeira identação é 
+    removida.
+
+        Quaisquer linhas que são 'mais identadas' mantém o resto de suas identações - 
+        estas linhas serão identadas com 4 espaços.
+estilo_compacto: >
+    Todo esse bloco de texto será o valor de 'estilo_compacto', mas esta
+    vez, todas as novas linhas serão substituídas com espaço simples.
+
+    Linhas em branco, como acima, são convertidas em um carater de nova linha.
+
+        Linhas 'mais-indentadas' mantém suas novas linhas também -
+        este texto irá aparecer em duas linhas.
+
+####################
+# TIPOS DE COLEÇÃO #
+####################
+
+# Texto aninhado é conseguido através de identação.
+um_mapa_aninhado:
+    chave: valor
+    outra_chave: Outro valor
+    outro_mapa_aninhado:
+        ola: ola
+
+# Mapas não tem que ter chaves com string.
+0.25: uma chave com valor flutuante
+
+# As chaves podem ser também objetos multi linhas, utilizando ? para indicar o começo de uma chave.
+? |
+    Esta é uma chave
+    que tem várias linhas
+: e este é o seu valor
+
+# também permite tipos de coleção de chaves, mas muitas linguagens de programação
+# vão reclamar.
+
+# Sequências (equivalente a listas ou arrays) semelhante à isso:
+uma_sequencia:
+    - Item 1
+    - Item 2
+    - 0.5 # sequencias podem conter tipos diferentes.
+    - Item 4
+    - chave: valor
+      outra_chave: outro_valor
+    -
+        - Esta é uma sequencia
+        - dentro de outra sequencia
+
+# Como YAML é um super conjunto de JSON, você também pode escrever mapas JSON de estilo e
+# sequencias:
+mapa_json: {"chave": "valor"}
+json_seq: [3, 2, 1, "decolar"]
+
+##########################
+# RECURSOS EXTRA DO YAML #
+##########################
+
+# YAML também tem um recurso útil chamado "âncoras", que permitem que você facilmente duplique
+# conteúdo em seu documento. Ambas estas chaves terão o mesmo valor:
+conteudo_ancora: & nome_ancora Essa string irá aparecer como o valor de duas chaves.
+outra_ancora: * nome_ancora
+
+# YAML também tem tags, que você pode usar para declarar explicitamente os tipos.
+string_explicita: !! str 0,5
+# Alguns analisadores implementam tags específicas de linguagem, como este para Python de
+# Tipo de número complexo.
+numero_complexo_em_python: !! python / complex 1 + 2j
+
+####################
+# YAML TIPOS EXTRA #
+####################
+
+# Strings e números não são os únicos que escalares YAML pode entender.
+# Data e 'data e hora' literais no formato ISO também são analisados.
+datetime: 2001-12-15T02: 59: 43.1Z
+datetime_com_espacos 2001/12/14: 21: 59: 43.10 -5
+Data: 2002/12/14
+
+# A tag !!binary indica que a string é na verdade um base64-encoded (condificado)
+# representação de um blob binário.
+gif_file: !!binary |
+    R0lGODlhDAAMAIQAAP//9/X17unp5WZmZgAAAOfn515eXvPz7Y6OjuDg4J+fn5
+    OTk6enp56enmlpaWNjY6Ojo4SEhP/++f/++f/++f/++f/++f/++f/++f/++f/+
+    +f/++f/++f/++f/++f/++SH+Dk1hZGUgd2l0aCBHSU1QACwAAAAADAAMAAAFLC
+    AgjoEwnuNAFOhpEMTRiggcz4BNJHrv/zCFcLiwMWYNG84BwwEeECcgggoBADs=
+
+# YAML também tem um tipo de conjunto, o que se parece com isso:
+set:
+    ? item1
+    ? item2
+    ? item3
+
+# Como Python, são apenas conjuntos de mapas com valors nulos; o acima é equivalente a:
+set2:
+    item1: nulo
+    item2: nulo
+    item3: nulo
+```
diff --git a/purescript.html.markdown b/purescript.html.markdown
index 6d8cfbb9..b413a9e3 100644
--- a/purescript.html.markdown
+++ b/purescript.html.markdown
@@ -48,7 +48,7 @@ not true -- false
 23 == 23 -- true
 1 /= 4 -- true
 1 >= 4 -- false
--- Comparisions < <= > >=
+-- Comparisons < <= > >=
 -- are defined in terms of compare
 compare 1 2 -- LT
 compare 2 2 -- EQ
@@ -62,7 +62,7 @@ true && (9 >= 19 || 1 < 2) -- true
 "Hellow\
 \orld" -- "Helloworld"
 -- Multiline string with newlines
-"""Hello 
+"""Hello
 world""" -- "Hello\nworld"
 -- Concatenate
 "such " ++ "amaze" -- "such amaze"
@@ -197,7 +197,7 @@ let even x = x `mod` 2 == 0
 filter even (1..10) -- [2,4,6,8,10]
 map (\x -> x + 11) (1..5) -- [12,13,14,15,16]
 
--- Requires purescript-foldable-traversabe (Data.Foldable)
+-- Requires purescript-foldable-traversable (Data.Foldable)
 
 foldr (+) 0 (1..10) -- 55
 sum (1..10) -- 55
@@ -208,4 +208,3 @@ any even [1,2,3] -- true
 all even [1,2,3] -- false
 
 ```
-
diff --git a/python.html.markdown b/python.html.markdown
index 2e7fd8be..12be4be1 100644
--- a/python.html.markdown
+++ b/python.html.markdown
@@ -657,6 +657,12 @@ math.sqrt == m.sqrt == sqrt  # => True
 import math
 dir(math)
 
+# If you have a Python script named math.py in the same
+# folder as your current script, the file math.py will 
+# be loaded instead of the built-in Python module. 
+# This happens because the local folder has priority
+# over Python's built-in libraries. 
+
 
 ####################################################
 ## 7. Advanced
diff --git a/python3.html.markdown b/python3.html.markdown
index d88ccec1..ea29fdba 100644
--- a/python3.html.markdown
+++ b/python3.html.markdown
@@ -716,6 +716,11 @@ math.sqrt(16) == m.sqrt(16)  # => True
 import math
 dir(math)
 
+# If you have a Python script named math.py in the same
+# folder as your current script, the file math.py will
+# be loaded instead of the built-in Python module.
+# This happens because the local folder has priority
+# over Python's built-in libraries.
 
 ####################################################
 ## 7. Advanced
diff --git a/pythonstatcomp.html.markdown b/pythonstatcomp.html.markdown
index f8d83b98..0b02dca8 100644
--- a/pythonstatcomp.html.markdown
+++ b/pythonstatcomp.html.markdown
@@ -150,9 +150,8 @@ ggplot(aes(x="age",y="weight"), data=pets) + geom_point() + labs(title="pets")
 url = "https://raw.githubusercontent.com/e99n09/R-notes/master/data/hre.csv"
 r = requests.get(url)
 fp = "hre.csv"
-f = open(fp, "wb")
-f.write(r.text.encode("UTF-8"))
-f.close()
+with open(fp, "wb") as f:
+    f.write(r.text.encode("UTF-8"))
 
 hre = pd.read_csv(fp)
 
diff --git a/r.html.markdown~ b/r.html.markdown~
new file mode 100644
index 00000000..ee9e7c90
--- /dev/null
+++ b/r.html.markdown~
@@ -0,0 +1,807 @@
+---
+language: R
+contributors:
+    - ["e99n09", "http://github.com/e99n09"]
+<<<<<<< HEAD
+=======
+    - ["isomorphismes", "http://twitter.com/isomorphisms"]
+    - ["kalinn", "http://github.com/kalinn"]
+>>>>>>> 6e38442b857a9d8178b6ce6713b96c52bf4426eb
+filename: learnr.r
+---
+
+R is a statistical computing language. It has lots of libraries for uploading and cleaning data sets, running statistical procedures, and making graphs. You can also run `R` commands within a LaTeX document.
+
+```r
+
+# Comments start with number symbols.
+
+# You can't make multi-line comments,
+# but you can stack multiple comments like so.
+
+# in Windows you can use CTRL-ENTER to execute a line.
+# on Mac it is COMMAND-ENTER
+
+
+
+#############################################################################
+# Stuff you can do without understanding anything about programming
+#############################################################################
+
+# In this section, we show off some of the cool stuff you can do in
+# R without understanding anything about programming. Do not worry
+# about understanding everything the code does. Just enjoy!
+
+data()	        # browse pre-loaded data sets
+data(rivers)	# get this one: "Lengths of Major North American Rivers"
+ls()	        # notice that "rivers" now appears in the workspace
+head(rivers)	# peek at the data set
+# 735 320 325 392 524 450
+
+length(rivers)	# how many rivers were measured?
+# 141
+summary(rivers) # what are some summary statistics?
+#   Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
+#  135.0   310.0   425.0   591.2   680.0  3710.0
+
+# make a stem-and-leaf plot (a histogram-like data visualization)
+stem(rivers)
+
+#  The decimal point is 2 digit(s) to the right of the |
+#
+#   0 | 4
+#   2 | 011223334555566667778888899900001111223333344455555666688888999
+#   4 | 111222333445566779001233344567
+#   6 | 000112233578012234468
+#   8 | 045790018
+#  10 | 04507
+#  12 | 1471
+#  14 | 56
+#  16 | 7
+#  18 | 9
+#  20 |
+#  22 | 25
+#  24 | 3
+#  26 |
+#  28 |
+#  30 |
+#  32 |
+#  34 |
+#  36 | 1
+
+stem(log(rivers)) # Notice that the data are neither normal nor log-normal!
+# Take that, Bell curve fundamentalists.
+
+#  The decimal point is 1 digit(s) to the left of the |
+#
+#  48 | 1
+#  50 |
+#  52 | 15578
+#  54 | 44571222466689
+#  56 | 023334677000124455789
+#  58 | 00122366666999933445777
+#  60 | 122445567800133459
+#  62 | 112666799035
+#  64 | 00011334581257889
+#  66 | 003683579
+#  68 | 0019156
+#  70 | 079357
+#  72 | 89
+#  74 | 84
+#  76 | 56
+#  78 | 4
+#  80 |
+#  82 | 2
+
+# make a histogram:
+hist(rivers, col="#333333", border="white", breaks=25) # play around with these parameters
+hist(log(rivers), col="#333333", border="white", breaks=25) # you'll do more plotting later
+
+# Here's another neat data set that comes pre-loaded. R has tons of these.
+data(discoveries)
+plot(discoveries, col="#333333", lwd=3, xlab="Year",
+     main="Number of important discoveries per year")
+plot(discoveries, col="#333333", lwd=3, type = "h", xlab="Year",
+     main="Number of important discoveries per year")
+
+# Rather than leaving the default ordering (by year),
+# we could also sort to see what's typical:
+sort(discoveries)
+#  [1]  0  0  0  0  0  0  0  0  0  1  1  1  1  1  1  1  1  1  1  1  1  2  2  2  2
+# [26]  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  2  3  3  3
+# [51]  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  3  4  4  4  4  4  4  4  4
+# [76]  4  4  4  4  5  5  5  5  5  5  5  6  6  6  6  6  6  7  7  7  7  8  9 10 12
+
+stem(discoveries, scale=2)
+#
+#  The decimal point is at the |
+#
+#   0 | 000000000
+#   1 | 000000000000
+#   2 | 00000000000000000000000000
+#   3 | 00000000000000000000
+#   4 | 000000000000
+#   5 | 0000000
+#   6 | 000000
+#   7 | 0000
+#   8 | 0
+#   9 | 0
+#  10 | 0
+#  11 |
+#  12 | 0
+
+max(discoveries)
+# 12
+summary(discoveries)
+#   Min. 1st Qu.  Median    Mean 3rd Qu.    Max.
+#    0.0     2.0     3.0     3.1     4.0    12.0
+
+# Roll a die a few times
+round(runif(7, min=.5, max=6.5))
+# 1 4 6 1 4 6 4
+# Your numbers will differ from mine unless we set the same random.seed(31337)
+
+# Draw from a standard Gaussian 9 times
+rnorm(9)
+# [1]  0.07528471  1.03499859  1.34809556 -0.82356087  0.61638975 -1.88757271
+# [7] -0.59975593  0.57629164  1.08455362
+
+
+
+##################################################
+# Data types and basic arithmetic
+##################################################
+
+# Now for the programming-oriented part of the tutorial.
+# In this section you will meet the important data types of R:
+# integers, numerics, characters, logicals, and factors.
+# There are others, but these are the bare minimum you need to
+# get started.
+
+# INTEGERS
+# Long-storage integers are written with L
+5L # 5
+class(5L) # "integer"
+# (Try ?class for more information on the class() function.)
+# In R, every single value, like 5L, is considered a vector of length 1
+length(5L) # 1
+# You can have an integer vector with length > 1 too:
+c(4L, 5L, 8L, 3L) # 4 5 8 3
+length(c(4L, 5L, 8L, 3L)) # 4
+class(c(4L, 5L, 8L, 3L)) # "integer"
+
+# NUMERICS
+# A "numeric" is a double-precision floating-point number
+5 # 5
+class(5) # "numeric"
+# Again, everything in R is a vector;
+# you can make a numeric vector with more than one element
+c(3,3,3,2,2,1) # 3 3 3 2 2 1
+# You can use scientific notation too
+5e4 # 50000
+6.02e23 # Avogadro's number
+1.6e-35 # Planck length
+# You can also have infinitely large or small numbers
+class(Inf)	# "numeric"
+class(-Inf)	# "numeric"
+# You might use "Inf", for example, in integrate(dnorm, 3, Inf);
+# this obviates Z-score tables.
+
+# BASIC ARITHMETIC
+# You can do arithmetic with numbers
+# Doing arithmetic on a mix of integers and numerics gives you another numeric
+10L + 66L # 76      # integer plus integer gives integer
+53.2 - 4  # 49.2    # numeric minus numeric gives numeric
+2.0 * 2L  # 4       # numeric times integer gives numeric
+3L / 4    # 0.75    # integer over numeric gives numeric
+3 %% 2	  # 1       # the remainder of two numerics is another numeric
+# Illegal arithmetic yeilds you a "not-a-number":
+0 / 0 # NaN
+class(NaN) # "numeric"
+# You can do arithmetic on two vectors with length greater than 1,
+# so long as the larger vector's length is an integer multiple of the smaller
+c(1,2,3) + c(1,2,3) # 2 4 6
+# Since a single number is a vector of length one, scalars are applied 
+# elementwise to vectors
+(4 * c(1,2,3) - 2) / 2 # 1 3 5
+# Except for scalars, use caution when performing arithmetic on vectors with 
+# different lengths. Although it can be done, 
+c(1,2,3,1,2,3) * c(1,2) # 1 4 3 2 2 6
+# Matching lengths is better practice and easier to read
+c(1,2,3,1,2,3) * c(1,2,1,2,1,2) 
+
+# CHARACTERS
+# There's no difference between strings and characters in R
+"Horatio" # "Horatio"
+class("Horatio") # "character"
+class('H') # "character"
+# Those were both character vectors of length 1
+# Here is a longer one:
+c('alef', 'bet', 'gimmel', 'dalet', 'he')
+# =>
+# "alef"   "bet"    "gimmel" "dalet"  "he"
+length(c("Call","me","Ishmael")) # 3
+# You can do regex operations on character vectors:
+substr("Fortuna multis dat nimis, nulli satis.", 9, 15) # "multis "
+gsub('u', 'ø', "Fortuna multis dat nimis, nulli satis.") # "Fortøna møltis dat nimis, nølli satis."
+# R has several built-in character vectors:
+letters
+# =>
+#  [1] "a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" "n" "o" "p" "q" "r" "s"
+# [20] "t" "u" "v" "w" "x" "y" "z"
+month.abb # "Jan" "Feb" "Mar" "Apr" "May" "Jun" "Jul" "Aug" "Sep" "Oct" "Nov" "Dec"
+
+# LOGICALS
+# In R, a "logical" is a boolean
+class(TRUE)	# "logical"
+class(FALSE)	# "logical"
+# Their behavior is normal
+TRUE == TRUE	# TRUE
+TRUE == FALSE	# FALSE
+FALSE != FALSE	# FALSE
+FALSE != TRUE	# TRUE
+# Missing data (NA) is logical, too
+class(NA)	# "logical"
+# Use | and & for logic operations.
+# OR
+TRUE | FALSE	# TRUE
+# AND
+TRUE & FALSE	# FALSE
+# Applying | and & to vectors returns elementwise logic operations
+c(TRUE,FALSE,FALSE) | c(FALSE,TRUE,FALSE) # TRUE TRUE FALSE
+c(TRUE,FALSE,TRUE) & c(FALSE,TRUE,TRUE) # FALSE FALSE TRUE
+# You can test if x is TRUE
+isTRUE(TRUE)	# TRUE
+# Here we get a logical vector with many elements:
+c('Z', 'o', 'r', 'r', 'o') == "Zorro" # FALSE FALSE FALSE FALSE FALSE
+c('Z', 'o', 'r', 'r', 'o') == "Z" # TRUE FALSE FALSE FALSE FALSE
+
+# FACTORS
+# The factor class is for categorical data
+# Factors can be ordered (like childrens' grade levels) or unordered (like gender)
+factor(c("female", "female", "male", NA, "female"))
+#  female female male   <NA>   female
+# Levels: female male
+# The "levels" are the values the categorical data can take
+# Note that missing data does not enter the levels
+levels(factor(c("male", "male", "female", NA, "female"))) # "female" "male"
+# If a factor vector has length 1, its levels will have length 1, too
+length(factor("male")) # 1
+length(levels(factor("male"))) # 1
+# Factors are commonly seen in data frames, a data structure we will cover later
+data(infert) # "Infertility after Spontaneous and Induced Abortion"
+levels(infert$education) # "0-5yrs"  "6-11yrs" "12+ yrs"
+
+# NULL
+# "NULL" is a weird one; use it to "blank out" a vector
+class(NULL)	# NULL
+parakeet = c("beak", "feathers", "wings", "eyes")
+parakeet
+# =>
+# [1] "beak"     "feathers" "wings"    "eyes"
+parakeet <- NULL
+parakeet
+# =>
+# NULL
+
+# TYPE COERCION
+# Type-coercion is when you force a value to take on a different type
+as.character(c(6, 8)) # "6" "8"
+as.logical(c(1,0,1,1)) # TRUE FALSE  TRUE  TRUE
+# If you put elements of different types into a vector, weird coercions happen:
+c(TRUE, 4) # 1 4
+c("dog", TRUE, 4) # "dog"  "TRUE" "4"
+as.numeric("Bilbo")
+# =>
+# [1] NA
+# Warning message:
+# NAs introduced by coercion
+
+# Also note: those were just the basic data types
+# There are many more data types, such as for dates, time series, etc.
+
+
+
+##################################################
+# Variables, loops, if/else
+##################################################
+
+# A variable is like a box you store a value in for later use.
+# We call this "assigning" the value to the variable.
+# Having variables lets us write loops, functions, and if/else statements
+
+# VARIABLES
+# Lots of way to assign stuff:
+x = 5 # this is possible
+y <- "1" # this is preferred
+TRUE -> z # this works but is weird
+
+# LOOPS
+# We've got for loops
+for (i in 1:4) {
+  print(i)
+}
+# We've got while loops
+a <- 10
+while (a > 4) {
+	cat(a, "...", sep = "")
+	a <- a - 1
+}
+# Keep in mind that for and while loops run slowly in R
+# Operations on entire vectors (i.e. a whole row, a whole column)
+# or apply()-type functions (we'll discuss later) are preferred
+
+# IF/ELSE
+# Again, pretty standard
+if (4 > 3) {
+	print("4 is greater than 3")
+} else {
+	print("4 is not greater than 3")
+}
+# =>
+# [1] "4 is greater than 3"
+
+# FUNCTIONS
+# Defined like so:
+jiggle <- function(x) {
+	x = x + rnorm(1, sd=.1)	#add in a bit of (controlled) noise
+	return(x)
+}
+# Called like any other R function:
+jiggle(5)	# 5±ε. After set.seed(2716057), jiggle(5)==5.005043
+
+
+
+###########################################################################
+# Data structures: Vectors, matrices, data frames, and arrays
+###########################################################################
+
+# ONE-DIMENSIONAL
+
+# Let's start from the very beginning, and with something you already know: vectors.
+vec <- c(8, 9, 10, 11)
+vec	#  8  9 10 11
+# We ask for specific elements by subsetting with square brackets
+# (Note that R starts counting from 1)
+vec[1]		# 8
+letters[18]	# "r"
+LETTERS[13]	# "M"
+month.name[9]	# "September"
+c(6, 8, 7, 5, 3, 0, 9)[3]	# 7
+# We can also search for the indices of specific components,
+which(vec %% 2 == 0)	# 1 3
+# grab just the first or last few entries in the vector,
+head(vec, 1)	# 8
+tail(vec, 2)	# 10 11
+# or figure out if a certain value is in the vector
+any(vec == 10) # TRUE
+# If an index "goes over" you'll get NA:
+vec[6]	# NA
+# You can find the length of your vector with length()
+length(vec)	# 4
+# You can perform operations on entire vectors or subsets of vectors
+vec * 4	# 16 20 24 28
+vec[2:3] * 5	# 25 30
+any(vec[2:3] == 8) # FALSE
+# and R has many built-in functions to summarize vectors
+mean(vec)	# 9.5
+var(vec)	# 1.666667
+sd(vec)		# 1.290994
+max(vec)	# 11
+min(vec)	# 8
+sum(vec)	# 38
+# Some more nice built-ins:
+5:15	# 5  6  7  8  9 10 11 12 13 14 15
+seq(from=0, to=31337, by=1337)
+# =>
+#  [1]     0  1337  2674  4011  5348  6685  8022  9359 10696 12033 13370 14707
+# [13] 16044 17381 18718 20055 21392 22729 24066 25403 26740 28077 29414 30751
+
+# TWO-DIMENSIONAL (ALL ONE CLASS)
+
+# You can make a matrix out of entries all of the same type like so:
+mat <- matrix(nrow = 3, ncol = 2, c(1,2,3,4,5,6))
+mat
+# =>
+#      [,1] [,2]
+# [1,]    1    4
+# [2,]    2    5
+# [3,]    3    6
+# Unlike a vector, the class of a matrix is "matrix", no matter what's in it
+class(mat) # => "matrix"
+# Ask for the first row
+mat[1,]	# 1 4
+# Perform operation on the first column
+3 * mat[,1]	# 3 6 9
+# Ask for a specific cell
+mat[3,2]	# 6
+
+# Transpose the whole matrix
+t(mat)
+# =>
+#      [,1] [,2] [,3]
+# [1,]    1    2    3
+# [2,]    4    5    6
+
+# Matrix multiplication
+mat %*% t(mat)
+# =>
+#      [,1] [,2] [,3]
+# [1,]   17   22   27
+# [2,]   22   29   36
+# [3,]   27   36   45
+
+# cbind() sticks vectors together column-wise to make a matrix
+mat2 <- cbind(1:4, c("dog", "cat", "bird", "dog"))
+mat2
+# =>
+#      [,1] [,2]
+# [1,] "1"  "dog"
+# [2,] "2"  "cat"
+# [3,] "3"  "bird"
+# [4,] "4"  "dog"
+class(mat2)	# matrix
+# Again, note what happened!
+# Because matrices must contain entries all of the same class,
+# everything got converted to the character class
+c(class(mat2[,1]), class(mat2[,2]))
+
+# rbind() sticks vectors together row-wise to make a matrix
+mat3 <- rbind(c(1,2,4,5), c(6,7,0,4))
+mat3
+# =>
+#      [,1] [,2] [,3] [,4]
+# [1,]    1    2    4    5
+# [2,]    6    7    0    4
+# Ah, everything of the same class. No coercions. Much better.
+
+# TWO-DIMENSIONAL (DIFFERENT CLASSES)
+
+# For columns of different types, use a data frame
+# This data structure is so useful for statistical programming,
+# a version of it was added to Python in the package "pandas".
+
+students <- data.frame(c("Cedric","Fred","George","Cho","Draco","Ginny"),
+                       c(3,2,2,1,0,-1),
+                       c("H", "G", "G", "R", "S", "G"))
+names(students) <- c("name", "year", "house") # name the columns
+class(students)	# "data.frame"
+students
+# =>
+#     name year house
+# 1 Cedric    3     H
+# 2   Fred    2     G
+# 3 George    2     G
+# 4    Cho    1     R
+# 5  Draco    0     S
+# 6  Ginny   -1     G
+class(students$year)	# "numeric"
+class(students[,3])	# "factor"
+# find the dimensions
+nrow(students)	# 6
+ncol(students)	# 3
+dim(students)	# 6 3
+# The data.frame() function converts character vectors to factor vectors
+# by default; turn this off by setting stringsAsFactors = FALSE when
+# you create the data.frame
+?data.frame
+
+# There are many twisty ways to subset data frames, all subtly unalike
+students$year	# 3  2  2  1  0 -1
+students[,2]	# 3  2  2  1  0 -1
+students[,"year"]	# 3  2  2  1  0 -1
+
+# An augmented version of the data.frame structure is the data.table
+# If you're working with huge or panel data, or need to merge a few data
+# sets, data.table can be a good choice. Here's a whirlwind tour:
+install.packages("data.table") # download the package from CRAN
+require(data.table) # load it
+students <- as.data.table(students)
+students # note the slightly different print-out
+# =>
+#      name year house
+# 1: Cedric    3     H
+# 2:   Fred    2     G
+# 3: George    2     G
+# 4:    Cho    1     R
+# 5:  Draco    0     S
+# 6:  Ginny   -1     G
+students[name=="Ginny"] # get rows with name == "Ginny"
+# =>
+#     name year house
+# 1: Ginny   -1     G
+students[year==2] # get rows with year == 2
+# =>
+#      name year house
+# 1:   Fred    2     G
+# 2: George    2     G
+# data.table makes merging two data sets easy
+# let's make another data.table to merge with students
+founders <- data.table(house=c("G","H","R","S"),
+                       founder=c("Godric","Helga","Rowena","Salazar"))
+founders
+# =>
+#    house founder
+# 1:     G  Godric
+# 2:     H   Helga
+# 3:     R  Rowena
+# 4:     S Salazar
+setkey(students, house)
+setkey(founders, house)
+students <- founders[students] # merge the two data sets by matching "house"
+setnames(students, c("house","houseFounderName","studentName","year"))
+students[,order(c("name","year","house","houseFounderName")), with=F]
+# =>
+#    studentName year house houseFounderName
+# 1:        Fred    2     G           Godric
+# 2:      George    2     G           Godric
+# 3:       Ginny   -1     G           Godric
+# 4:      Cedric    3     H            Helga
+# 5:         Cho    1     R           Rowena
+# 6:       Draco    0     S          Salazar
+
+# data.table makes summary tables easy
+students[,sum(year),by=house]
+# =>
+#    house V1
+# 1:     G  3
+# 2:     H  3
+# 3:     R  1
+# 4:     S  0
+
+# To drop a column from a data.frame or data.table,
+# assign it the NULL value
+students$houseFounderName <- NULL
+students
+# =>
+#    studentName year house
+# 1:        Fred    2     G
+# 2:      George    2     G
+# 3:       Ginny   -1     G
+# 4:      Cedric    3     H
+# 5:         Cho    1     R
+# 6:       Draco    0     S
+
+# Drop a row by subsetting
+# Using data.table:
+students[studentName != "Draco"]
+# =>
+#    house studentName year
+# 1:     G        Fred    2
+# 2:     G      George    2
+# 3:     G       Ginny   -1
+# 4:     H      Cedric    3
+# 5:     R         Cho    1
+# Using data.frame:
+students <- as.data.frame(students)
+students[students$house != "G",]
+# =>
+#   house houseFounderName studentName year
+# 4     H            Helga      Cedric    3
+# 5     R           Rowena         Cho    1
+# 6     S          Salazar       Draco    0
+
+# MULTI-DIMENSIONAL (ALL ELEMENTS OF ONE TYPE)
+
+# Arrays creates n-dimensional tables
+# All elements must be of the same type
+# You can make a two-dimensional table (sort of like a matrix)
+array(c(c(1,2,4,5),c(8,9,3,6)), dim=c(2,4))
+# =>
+#      [,1] [,2] [,3] [,4]
+# [1,]    1    4    8    3
+# [2,]    2    5    9    6
+# You can use array to make three-dimensional matrices too
+array(c(c(c(2,300,4),c(8,9,0)),c(c(5,60,0),c(66,7,847))), dim=c(3,2,2))
+# =>
+# , , 1
+#
+#      [,1] [,2]
+# [1,]    2    8
+# [2,]  300    9
+# [3,]    4    0
+#
+# , , 2
+#
+#      [,1] [,2]
+# [1,]    5   66
+# [2,]   60    7
+# [3,]    0  847
+
+# LISTS (MULTI-DIMENSIONAL, POSSIBLY RAGGED, OF DIFFERENT TYPES)
+
+# Finally, R has lists (of vectors)
+list1 <- list(time = 1:40)
+list1$price = c(rnorm(40,.5*list1$time,4)) # random
+list1
+# You can get items in the list like so
+list1$time # one way
+list1[["time"]] # another way
+list1[[1]] # yet another way
+# =>
+#  [1]  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33
+# [34] 34 35 36 37 38 39 40
+# You can subset list items like any other vector
+list1$price[4]
+
+# Lists are not the most efficient data structure to work with in R;
+# unless you have a very good reason, you should stick to data.frames
+# Lists are often returned by functions that perform linear regressions
+
+##################################################
+# The apply() family of functions
+##################################################
+
+# Remember mat?
+mat
+# =>
+#      [,1] [,2]
+# [1,]    1    4
+# [2,]    2    5
+# [3,]    3    6
+# Use apply(X, MARGIN, FUN) to apply function FUN to a matrix X
+# over rows (MAR = 1) or columns (MAR = 2)
+# That is, R does FUN to each row (or column) of X, much faster than a
+# for or while loop would do
+apply(mat, MAR = 2, jiggle)
+# =>
+#      [,1] [,2]
+# [1,]    3   15
+# [2,]    7   19
+# [3,]   11   23
+# Other functions: ?lapply, ?sapply
+
+# Don't feel too intimidated; everyone agrees they are rather confusing
+
+# The plyr package aims to replace (and improve upon!) the *apply() family.
+install.packages("plyr")
+require(plyr)
+?plyr
+
+
+
+#########################
+# Loading data
+#########################
+
+# "pets.csv" is a file on the internet
+# (but it could just as easily be be a file on your own computer)
+pets <- read.csv("http://learnxinyminutes.com/docs/pets.csv")
+pets
+head(pets, 2) # first two rows
+tail(pets, 1) # last row
+
+# To save a data frame or matrix as a .csv file
+write.csv(pets, "pets2.csv") # to make a new .csv file
+# set working directory with setwd(), look it up with getwd()
+
+# Try ?read.csv and ?write.csv for more information
+
+
+
+#########################
+# Statistical Analysis
+#########################
+
+# Linear regression!
+linearModel <- lm(price  ~ time, data = list1)
+linearModel # outputs result of regression
+# =>
+# Call:
+# lm(formula = price ~ time, data = list1)
+# 
+# Coefficients:
+# (Intercept)         time  
+#      0.1453       0.4943  
+summary(linearModel) # more verbose output from the regression
+# =>
+# Call:
+# lm(formula = price ~ time, data = list1)
+#
+# Residuals:
+#     Min      1Q  Median      3Q     Max 
+# -8.3134 -3.0131 -0.3606  2.8016 10.3992 
+#
+# Coefficients:
+#             Estimate Std. Error t value Pr(>|t|)    
+# (Intercept)  0.14527    1.50084   0.097    0.923    
+# time         0.49435    0.06379   7.749 2.44e-09 ***
+# ---
+# Signif. codes:  0 ‘***’ 0.001 ‘**’ 0.01 ‘*’ 0.05 ‘.’ 0.1 ‘ ’ 1
+#
+# Residual standard error: 4.657 on 38 degrees of freedom
+# Multiple R-squared:  0.6124,	Adjusted R-squared:  0.6022 
+# F-statistic: 60.05 on 1 and 38 DF,  p-value: 2.44e-09
+coef(linearModel) # extract estimated parameters
+# =>
+# (Intercept)        time 
+#   0.1452662   0.4943490 
+summary(linearModel)$coefficients # another way to extract results
+# =>
+#              Estimate Std. Error    t value     Pr(>|t|)
+# (Intercept) 0.1452662 1.50084246 0.09678975 9.234021e-01
+# time        0.4943490 0.06379348 7.74920901 2.440008e-09
+summary(linearModel)$coefficients[,4] # the p-values 
+# =>
+#  (Intercept)         time 
+# 9.234021e-01 2.440008e-09 
+
+# GENERAL LINEAR MODELS
+# Logistic regression
+set.seed(1)
+list1$success = rbinom(length(list1$time), 1, .5) # random binary
+glModel <- glm(success  ~ time, data = list1, 
+	family=binomial(link="logit"))
+glModel # outputs result of logistic regression
+# =>
+# Call:  glm(formula = success ~ time, 
+#	family = binomial(link = "logit"), data = list1)
+#
+# Coefficients:
+# (Intercept)         time  
+#     0.17018     -0.01321  
+# 
+# Degrees of Freedom: 39 Total (i.e. Null);  38 Residual
+# Null Deviance:	    55.35 
+# Residual Deviance: 55.12 	 AIC: 59.12
+summary(glModel) # more verbose output from the regression
+# =>
+# Call:
+# glm(formula = success ~ time, 
+#	family = binomial(link = "logit"), data = list1)
+
+# Deviance Residuals: 
+#    Min      1Q  Median      3Q     Max  
+# -1.245  -1.118  -1.035   1.202   1.327  
+# 
+# Coefficients:
+#             Estimate Std. Error z value Pr(>|z|)
+# (Intercept)  0.17018    0.64621   0.263    0.792
+# time        -0.01321    0.02757  -0.479    0.632
+# 
+# (Dispersion parameter for binomial family taken to be 1)
+#
+#     Null deviance: 55.352  on 39  degrees of freedom
+# Residual deviance: 55.121  on 38  degrees of freedom
+# AIC: 59.121
+# 
+# Number of Fisher Scoring iterations: 3
+
+
+#########################
+# Plots
+#########################
+
+# BUILT-IN PLOTTING FUNCTIONS
+# Scatterplots!
+plot(list1$time, list1$price, main = "fake data")
+# Plot regression line on existing plot
+abline(linearModel, col = "red")
+# Get a variety of nice diagnostics
+plot(linearModel)
+# Histograms!
+hist(rpois(n = 10000, lambda = 5), col = "thistle")
+# Barplots!
+barplot(c(1,4,5,1,2), names.arg = c("red","blue","purple","green","yellow"))
+
+# GGPLOT2
+# But these are not even the prettiest of R's plots
+# Try the ggplot2 package for more and better graphics
+install.packages("ggplot2")
+require(ggplot2)
+?ggplot2
+pp <- ggplot(students, aes(x=house))
+pp + geom_histogram()
+ll <- as.data.table(list1)
+pp <- ggplot(ll, aes(x=time,price))
+pp + geom_point()
+# ggplot2 has excellent documentation (available http://docs.ggplot2.org/current/)
+
+
+
+```
+
+## How do I get R?
+
+* Get R and the R GUI from [http://www.r-project.org/](http://www.r-project.org/)
+* [RStudio](http://www.rstudio.com/ide/) is another GUI
diff --git a/ro-ro/bash-ro.html.markdown b/ro-ro/bash-ro.html.markdown
index debeb67a..32a878b2 100644
--- a/ro-ro/bash-ro.html.markdown
+++ b/ro-ro/bash-ro.html.markdown
@@ -12,166 +12,171 @@ lang: ro-ro
 filename: LearnBash-ro.sh
 ---
 
-Bash este numele shell-ului unix, care a fost de asemenea distribuit drept shell pentru sistemul de operare GNU si ca shell implicit pentru Linux si Mac OS X.
+Bash este numele shell-ului UNIX, care a fost de asemenea distribuit drept shell pentru sistemul de operare GNU și ca shell implicit pentru Linux si Mac OS X.
 Aproape toate exemplele de mai jos pot fi parte dintr-un script sau pot fi executate direct in linia de comanda.
 
-[Citeste mai multe:](http://www.gnu.org/software/bash/manual/bashref.html)
+[Citește mai multe:](http://www.gnu.org/software/bash/manual/bashref.html)
 
 ```bash
 #!/bin/bash
 # Prima linie din script se numeste "shebang" 
-# care spune systemului cum sa execute scriptul
+# care spune sistemului cum să execute scriptul
 # http://en.wikipedia.org/wiki/Shebang_(Unix)
-# Dupa cum te-ai prins deja, comentariile incep cu #. 
+# După cum te-ai prins deja, comentariile încep cu #. 
 # Shebang este de asemenea un comentariu.
 
 # Exemplu simplu de hello world:
 echo Hello world!
 
-# Fiecare comanda incepe pe o linie noua, sau dupa punct si virgula ;
+# Fiecare comandă începe pe o linie nouă, sau după punct și virgula ;
 echo 'Prima linie'; echo 'A doua linie'
 
 # Declararea unei variabile se face astfel:
-VARIABLE="Niste text"
+VARIABLE="Niște text"
 
-# DAR nu asa:
+# DAR nu așa:
 VARIABLE = "Niste text"
-# Bash va crede ca VARIABLE este o comanda care trebuie executata si va
-# returna o eroare pentru ca nu va putea fi gasita.
+# Bash va crede că VARIABLE este o comandă care trebuie executată și va
+# returna o eroare pentru că nu va putea fi găsita.
 
 # Folosind variabila:
 echo $VARIABLE
 echo "$VARIABLE"
 echo '$VARIABLE'
-# Atunci cand folosesti variabila, o atribui, o exporti sau altfel, 
-# numele ei se scrie fara $.
-# Daca vrei sa folosesti valoarea variabilei, atunci trebuie sa folosesti $.
-# Atentie la faptul ca ' (apostrof) nu va inlocui variabla cu valoarea ei.
+# Atunci când folosesti variabila, o atribui, o exporți sau altfel, 
+# numele ei se scrie fără $.
+# Daca vrei sa folosesti valoarea variabilei, atunci trebuie să folosești $.
+# Atentie la faptul că ' (apostrof) nu va inlocui variabla cu valoarea ei.
 
-# Inlocuirea de caractere in variabile
-echo ${VARIABLE/Some/A}
-# Asta va inlocui prima aparitie a "Some" cu "A" in variabila de mai sus.
+# Inlocuirea de caractere în variabile
+echo ${VARIABLE/Niște/Un}
+# Asta va înlocui prima apariție a "Niște" cu "Un" în variabila de mai sus.
 
-# Substring dintr-o variabila
+# Substring dintr-o variabilă
 echo ${VARIABLE:0:7}
 # Asta va returna numai primele 7 caractere din variabila.
 
 # Valoarea implicita a unei variabile:
-echo ${FOO:-"ValoareaImplicitaDacaFOOLipsesteSauEGoala"}
-# Asta functioneaza pentru null (FOO=),
-# sir de caractere gol (FOO=""), zero (FOO=0) returneaza 0
+echo ${FOO:-"ValoareaImplicitaDacaFOOLipseșteSauEGoală"}
+# Asta functionează pentru null (FOO=),
+# sir de caractere gol (FOO=""), zero (FOO=0) returnează 0
 
 # Variabile pre-existente
-echo "Ulima valoare returnata de ultimul program rulat: $?"
-echo "ID-ul procesului (PID) care ruleaza scriptul: $$"
-echo "Numarul de argumente: $#"
+echo "Ulima valoare returnată de ultimul program rulat: $?"
+echo "ID-ul procesului (PID) care rulează scriptul: $$"
+echo "Numărul de argumente: $#"
 echo "Argumentele scriptului: $@"
-echo "Argumentele scriptului separate in variabile: $1 $2..."
+echo "Argumentele scriptului separate în variabile: $1 $2..."
 
-# Citind o valoare din consola
-echo "Care e numele tau?"
-read NAME # Observa faptul ca nu a trebuit sa declaram o variabila noua
+# Citind o valoare din consolă
+echo "Care e numele tău?"
+read NAME # Observă faptul că nu a trebuit să declarăm o variabilă nouă
 echo Salut, $NAME!
 
 # Avem obisnuita instructiune "if"
-# Foloseste "man test" pentru mai multe informatii 
-# despre instructinea conditionala
+# Folosește "man test" pentru mai multe informații 
+# despre instrucținea conditionala
 if [ $NAME -ne $USER ]
 then
-    echo "Numele tau este username-ul tau"
+    echo "Numele tău este username-ul tău"
 else
-    echo "Numele tau nu este username-ul tau"
+    echo "Numele tău nu este username-ul tău"
 fi
 
-# Este de asemenea si executarea conditionala de comenzi
-echo "Intotdeauna executat" || echo "Executat daca prima instructiune esueaza"
-echo "Intotdeauna executat" && echo "Executat daca prima instructiune NU esueaza"
+# Există, de asemenea, și executarea conditională de comenzi
+echo "Întotdeauna executat" || echo "Executat dacă prima instrucțiune eșuează"
+echo "Întotdeauna executat" && echo "Executat dacă prima instrucțiune NU esuează"
 
-# Expresiile apar in urmatorul format
+# Expresiile apar în urmatorul format
 echo $(( 10 + 5 ))
 
-# Spre deosebire de alte limbaje de programare bash este un shell - asa ca 
-# functioneaza in contextul directorului curent. Poti vedea fisiere si directoare
+# Spre deosebire de alte limbaje de programare, bash este un shell - așa că 
+# funcționează in contextul directorului curent. Poți vedea fișiere și directoare
 # din directorul curent folosind comanda "ls":
 ls
 
-# Aceste comenzi au optiuni care la controleaza executia
-ls -l # Listeaza fiecare fisier si director pe o linie separata
+# Aceste comenzi au optiuni care le controlează execuțiă
+ls -l # Listează fiecare fișier și director pe o linie separată
 
 # Rezultatele comenzii anterioare pot fi 
-# trimise urmatoarei comenzi drept argument
-# Comanda grep filtreaza argumentele trimise cu sabloane. 
+# trimise următoarei comenzi drept argument
+# Comanda grep filtrează argumentele trimise cu sabloane. 
 # Astfel putem vedea fiserele .txt din directorul curent.
 ls -l | grep "\.txt"
 
-# De asemenea poti redirectiona o comanda, input si error output
-python2 hello.py < "input.in"
-python2 hello.py > "output.out"
-python2 hello.py 2> "error.err"
-# Output-ul va suprascrie fisierul daca acesta exista.
-# Daca vrei sa fie concatenate poti folosi ">>" 
-
-# Comenzile pot fi inlocuite in interiorul altor comenzi folosind $( ):
-# Urmatoarea comanda afiseaza numarul de fisiere 
-# si directoare din directorul curent
-echo "Sunt $(ls | wc -l) fisiere aici."
-
-# Acelasi lucru se poate obtine folosind apostrf-ul inversat ``,
-# dar nu pot fi folosite unele in interiorul celorlalte asa ca modalitatea 
-# preferata este de a folosi $( )
-echo "Sunt `ls | wc -l` fisiere aici."
-
-# Bash foloseste o instructiune 'case' care functioneaza 
-# in mod similar cu instructiunea switch din Java si C++
+# De asemenea, poți redirecționa date de intrare spre sau erori/date de ieșire
+# dinspre o comandă
+python2 hello.py < "intrare.in"
+python2 hello.py > "ieșire.out"
+python2 hello.py 2> "erori.err"
+# Output-ul va suprascrie fișierul dacă acesta există.
+# Daca vrei să fie concatenate datele poți folosi ">>" în loc de ">"
+
+# Comenzile pot fi înlocuite în interiorul altor comenzi folosind $( ):
+# Urmatoarea comandă afișează numărul de fișiere 
+# și directoare din directorul curent
+echo "Sunt $(ls | wc -l) fișiere aici."
+
+# Același lucru se poate obține folosind apostroful inversat ``,
+# dar nu pot fi folosite limbricate, așa ca modalitatea 
+# preferată este de a folosi $( )
+echo "Sunt `ls | wc -l` fișiere aici."
+
+# Bash folosește o instrucțiune 'case' care funcționeaza 
+# în mod similar cu instructiunea switch din Java si C++
 case "$VARIABLE" in 
     0) echo "Este un zero.";;
     1) echo "Este un unu.";;
     *) echo "Nu este null";;
 esac
 
-# Instructiunea for parcurge toate elementele trimise:
-# Continutul variabilei $VARIABLE este printat de 3 ori
+# Instrucțiunea 'for' parcurge toate elementele trimise:
+# Conținutul variabilei $VARIABLE este printat de 3 ori
 for VARIABLE in {1..3}
 do
     echo "$VARIABLE"
 done
 
-# while loop:
+# Buclă while:
 while [true]
 do
-    echo "in interiorul iteratiei aici..."
+    echo "în interiorul iterației aici..."
     break
 done
 
-# De asemenea poti defini functii
-# Definitie:
+# De asemenea poți defini funcții
+# Definiție:
 function foo ()
 {
-    echo "Argumentele functioneaza ca si argumentele scriptului: $@"
+    echo "Argumentele funcționeaza ca și argumentele scriptului: $@"
     echo "Si: $1 $2..."
-    echo "Asta este o functie"
+    echo "Asta este o funcție"
     return 0
 }
 
-# sau mai simplu
+# sau mai simplu:
 bar ()
 {
-    echo "Alta metoda de a declara o functie"
+    echo "Altă metodă de a declara o funcție"
     return 0
 }
 
-# Invocarea unei functii
+# Invocarea unei funcții:
 foo "Numele meu este: " $NAME
 
-# Sunt o multime de comenzi utile pe care ar trebui sa le inveti:
+# Sunt o multime de comenzi utile pe care ar trebui să le inveți:
 tail -n 10 file.txt
-# printeaza ultimele 10 linii din fisierul file.txt
+# afișează ultimele 10 linii din fișierul file.txt
+
 head -n 10 file.txt
-# printeaza primele 10 linii din fisierul file.txt
+# afișează primele 10 linii din fișierul file.txt
+
 sort file.txt
-# sorteaza liniile din file.txt
+# sortează liniile din file.txt
+
 uniq -d file.txt
-# raporteaza sau omite liniile care se repeta, cu -d le raporteaza
+# raporteaza sau omite liniile care se repetă. Cu -d le raporteaza
+
 cut -d ',' -f 1 file.txt
-# printeaza doar prima coloana inainte de caracterul ","
+# printează doar prima coloană inainte de caracterul ","
 ```
diff --git a/ro-ro/coffeescript-ro.html.markdown b/ro-ro/coffeescript-ro.html.markdown
new file mode 100644
index 00000000..695274d2
--- /dev/null
+++ b/ro-ro/coffeescript-ro.html.markdown
@@ -0,0 +1,102 @@
+---
+language: coffeescript
+contributors:
+  - ["Tenor Biel", "http://github.com/L8D"]
+  - ["Xavier Yao", "http://github.com/xavieryao"]
+translators:
+    - ["Bogdan Lazar", "http://twitter.com/tricinel"]
+filename: coffeescript-ro.coffee
+lang: ro-ro
+---
+
+CoffeeScript este un limbaj de programare care este compilat in Javascript. Nu exista un interpretator la runtime-ul aplicatiei. Fiind unul din successorii Javascript, CoffeeScript incearca sa compileze Javascript usor de citit si performant.
+
+Mai cititi si [website-ul CoffeeScript](http://coffeescript.org/), care contine un tutorial complet Coffeescript.
+
+```coffeescript
+# CoffeeScript este un limbaj de hipster.
+# Se foloseste de trendurile multor limbaje moderne de programare.
+# Comentarii sunt ca in Ruby sau Python.
+
+###
+Comentariile in bloc sunt create cu `###`, iar acestea sunt transformate in `/*` si `*/` pentru Javascript
+
+Ar trebuie sa intelegeti Javascript pentru a continua cu acest ghid.
+###
+
+# Atribuirea valorilor:
+numar   = 42 #=> var numar = 42;
+opus = true #=> var opus = true;
+
+# Conditii:
+numar = -42 if opus #=> if(opus) { numar = -42; }
+
+# Functii:
+laPatrat = (x) -> x * x #=> var laPatrat = function(x) { return x * x; }
+
+plin = (recipient, lichid = "cafea") ->
+  "Umplem #{recipient} cu #{cafea}..."
+#=>var plin;
+#
+#plin = function(recipient, lichid) {
+#  if (lichid == null) {
+#    lichid = "cafea";
+#  }
+#  return "Umplem " + recipient + " cu " + lichid + "...";
+#};
+
+# Liste:
+lista = [1..5] #=> var lista = [1, 2, 3, 4, 5];
+
+# Obiecte:
+matematica =
+  radacina:   Math.sqrt
+  laPatrat: laPatrat
+  cub:   (x) -> x * square x
+#=> var matematica = {
+#    "radacina": Math.sqrt,
+#    "laPatrat": laPatrat,
+#    "cub": function(x) { return x * square(x); }
+#   };
+
+# Splats:
+cursa = (castigator, alergatori...) ->
+  print castigator, alergatori
+#=>cursa = function() {
+#    var alergatori, castigator;
+#    castigator = arguments[0], alergatori = 2 <= arguments.length ? __slice.call(arguments, 1) : [];
+#    return print(castigator, alergatori);
+#  };
+
+# Verificarea existentei:
+alert "Stiam eu!" if elvis?
+#=> if(typeof elvis !== "undefined" && elvis !== null) { alert("Stiam eu!"); }
+
+# Operatiuni cu matrice:
+cuburi = (math.cube num for num in list)
+#=>cuburi = (function() {
+#	  var _i, _len, _results;
+#	  _results = [];
+# 	for (_i = 0, _len = list.length; _i < _len; _i++) {
+#		  num = list[_i];
+#		  _results.push(math.cube(num));
+#	  }
+#	  return _results;
+# })();
+
+alimente = ['broccoli', 'spanac', 'ciocolata']
+mananca aliment for aliment in alimente when aliment isnt 'ciocolata'
+#=>alimente = ['broccoli', 'spanac', 'ciocolata'];
+#
+#for (_k = 0, _len2 = alimente.length; _k < _len2; _k++) {
+#  aliment = alimente[_k];
+#  if (aliment !== 'ciocolata') {
+#    eat(aliment);
+#  }
+#}
+```
+
+## Resurse aditionale
+
+- [Smooth CoffeeScript](http://autotelicum.github.io/Smooth-CoffeeScript/)
+- [CoffeeScript Ristretto](https://leanpub.com/coffeescript-ristretto/read)
diff --git a/ro-ro/json-ro.html.markdown b/ro-ro/json-ro.html.markdown
new file mode 100644
index 00000000..e897059c
--- /dev/null
+++ b/ro-ro/json-ro.html.markdown
@@ -0,0 +1,61 @@
+---
+language: json
+filename: learnjson-ro.json
+contributors:
+  - ["Anna Harren", "https://github.com/iirelu"]
+  - ["Marco Scannadinari", "https://github.com/marcoms"]
+translators:
+    - ["Serban Constantin", "https://github.com/fuzzmz"]
+lang: ro-ro
+---
+
+Deoarece JSON este un fromat foarte simplu de schimb de date acesta va fi
+probabil cel mai simplu Invata X in Y minute.
+
+JSON in forma cea mai pura nu contine comentarii insa majoritatea parserelor
+vor accepta comentarii in stil C (`//`, `/* */`). Pentru acest caz insa totul
+va fi JSON 100% valid. Din fericire codul vorbeste de la sine.
+
+```json
+{
+  "cheie": "valoare",
+  
+  "chei": "trebuie mereu inconjurate de ghilimele",
+  "numere": 0,
+  "stringuri": "Bunã. Tot setul unicode este permis, chiar si \"escaping\".",
+  "are booleane?": true,
+  "nimic": null,
+
+  "numere mari": 1.2e+100,
+
+  "obiecte": {
+    "comentariu": "Majoritatea structurii va veni din obiecte.",
+
+    "vectori": [0, 1, 2, 3, "Vectorii pot avea orice in ei.", 5],
+
+    "alt obiect": {
+      "comentariu": "Lucrurile pot fi subordonate. Foarte util."
+    }
+  },
+
+  "glumite": [
+    {
+      "surse de potasiu": ["banane"]
+    },
+    [
+      [1, 0, 0, 0],
+      [0, 1, 0, 0],
+      [0, 0, 1, "neo"],
+      [0, 0, 0, 1]
+    ]
+  ],
+  
+  "stil alternativ": {
+    "comentariu": "ia uite la asta!"
+  , "pozitia virgulei": "nu conteaza - daca e inaintea valorii atunci e valida"
+  , "alt comentariu": "ce dragut"
+  },
+
+  "a fost scurt": "Am terminat. Acum stii tot ce are JSON de oferit."
+}
+```
diff --git a/ro-ro/python-ro.html.markdown b/ro-ro/python-ro.html.markdown
index 125ba2f4..c96e30dc 100644
--- a/ro-ro/python-ro.html.markdown
+++ b/ro-ro/python-ro.html.markdown
@@ -8,14 +8,16 @@ filename: learnpython-ro.py
 lang: ro-ro
 ---
 
-Python a fost creat de Guido Van Rossum la începutul anilor '90. Python a devenit astăzi unul din
-cele mai populare limbaje de programare. M-am indrăgostit de Python pentru claritatea sa sintactică.
-Python este aproape pseudocod executabil.
+Python a fost creat de Guido Van Rossum la începutul anilor '90. Python a
+devenit astăzi unul din cele mai populare limbaje de programare.
+M-am indrăgostit de Python pentru claritatea sa sintactică. Python este aproape
+pseudocod executabil.
 
-Opinia dumneavoastră este binevenită! Puteţi sa imi scrieţi la [@ociule](http://twitter.com/ociule) sau ociule [at] [google's email service]
+Opinia dumneavoastră este binevenită! Puteţi sa imi scrieţi la [@ociule](http://twitter.com/ociule)
+sau ociule [at] [google's email service]
 
-Notă: Acest articol descrie Python 2.7, dar este util şi pentru Python 2.x. O versiune Python 3 va apărea
-în curând, în limba engleză mai întâi.
+Notă: Acest articol descrie Python 2.7, dar este util şi pentru Python 2.x.
+O versiune Python 3 va apărea în curând, în limba engleză mai întâi.
 
 ```python
 # Comentariile pe o singură linie încep cu un caracter diez.
@@ -36,7 +38,8 @@ Notă: Acest articol descrie Python 2.7, dar este util şi pentru Python 2.x. O
 10 * 2 #=> 20
 35 / 5 #=> 7
 
-# Împărţirea este un pic surprinzătoare. Este de fapt împărţire pe numere întregi şi rotunjeşte
+# Împărţirea este un pic surprinzătoare. Este de fapt împărţire pe numere
+# întregi şi rotunjeşte
 # automat spre valoarea mai mică
 5 / 2 #=> 2
 
diff --git a/ro-ro/xml-ro.html.markdown b/ro-ro/xml-ro.html.markdown
new file mode 100644
index 00000000..269010c2
--- /dev/null
+++ b/ro-ro/xml-ro.html.markdown
@@ -0,0 +1,133 @@
+---
+language: xml
+filename: learnxml-ro.xml
+contributors:
+  - ["João Farias", "https://github.com/JoaoGFarias"]
+translators:
+    - ["Serban Constantin", "https://github.com/fuzzmz"]
+lang: ro-ro
+---
+
+XML este un limbaj de markup ce are ca scop stocarea si transportul de date.
+
+Spre deosebire de HTML, XML nu specifica cum sa fie afisata sau formatata
+informatia, ci doar o transporta.
+
+* Sintaxa XML
+
+```xml
+<!-- Comentariile in XML arata asa -->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<librarie>
+  <carte categorie="GATIT">
+    <titlu limba="ro">Mancaruri italiene</titlu>
+    <autor>Giada De Laurentiis</autor>
+    <an>2005</an>
+    <pret>30.00</pret>
+  </carte>
+  <carte categorie="COPII">
+    <titlu limba="ro">Harry Potter</titlu>
+    <autor>J K. Rowling</autor>
+    <an>2005</an>
+    <pret>29.99</pret>
+  </carte>
+  <carte categorie="WEB">
+    <titlu limba="ro">Invata XML</titlu>
+    <autor>Erik T. Ray</autor>
+    <an>2003</an>
+    <pret>39.95</pret>
+  </carte>
+</librarie>
+
+<!-- Deasupra este un fisier XML obisnuit.
+  Incepe cu o declaratie ce adauga niste metadata (optional).
+  
+  XML foloseste o structura arborescenta. Deasupra, nodul de baza este
+  'librarie', care are trei noduri copil, toate 'carti'. Acele noduri au la
+  randul lor noduri copii si asa mai departe...
+
+  Nodurile sunt create folosind taguri deschise/inchise, iar copii sunt doar
+  noduri intre tagurile de deschis si inchis.-->  
+
+
+<!-- XML transporta doua tipuri de date:
+  1 - Atribute -> Metadata despre un nod.
+      In general, parserul XML foloseste aceasta informatie sa stocheze
+      proprietatile datelor.
+      Este caracterizat de aparitia in paranteze in cadrul tagului deschis
+  2 - Elemente -> Date pure.
+      Asta este ceea ce parserul va extrage din documentul XML.
+      Elementele apar intre tagurile deschis si inchis, fara paranteze. -->
+      
+  
+<!-- Dedesubt, un element cu doua atribute -->
+<file type="gif" id="4293">computer.gif</file>
+
+
+```
+
+* Document bine formatat x Validare
+
+Un document XML este bine formatat daca este corect sintactic.
+Cu toate astea este posibil sa injectam mai multe constrangeri in document
+folosind definitii precum DTD si XML Schema.
+
+Un document XML ce foloseste o definitie de document este numit valid in
+contextul documentului. 
+
+Cu acest tool poti verifica datele XML in afara codului aplicatiei.
+
+```xml
+
+<!-- Dedesubt este o versiune simplificata a documentului librarie, 
+  cu aditia definitiei DTD.-->
+
+<?xml version="1.0" encoding="UTF-8"?>
+<!DOCTYPE note SYSTEM "Librarie.dtd">
+<librarie>
+  <carte categorie="GATIT">
+    <titlu >Everyday Italian</titlu>
+    <pret>30.00</pret>
+  </carte>
+</librarie>
+
+<!-- DTD-ul poate fi ceva similar cu:-->
+
+<!DOCTYPE note
+[
+<!ELEMENT librarie (carte+)>
+<!ELEMENT carte (titlu,pret)>
+<!ATTLIST carte categorie CDATA "Literatura">
+<!ELEMENT titlu (#PCDATA)>
+<!ELEMENT pret (#PCDATA)>
+]>
+
+
+<!-- DTD-ul incepe cu o declaratie.
+  Dupa, nodul de baza este declarat, cerand unul sau mai multe noduri copii
+  de tipul 'carte'.
+  Fiecare 'carte' trebuie sa contina exact un 'titlu' si 'pret' si un atribut
+  numit 'categorie', cu "Literatura" ca valoare implicita.
+  Nodurile 'titlu' si 'pret' contin parsed character data.-->
+
+<!-- DTD-ul poate fi declara si in interiorul fisierului XML.-->
+
+<?xml version="1.0" encoding="UTF-8"?>
+
+<!DOCTYPE note
+[
+<!ELEMENT librarie (carte+)>
+<!ELEMENT carte (titlu,pret)>
+<!ATTLIST carte categorie CDATA "Literatura">
+<!ELEMENT titlu (#PCDATA)>
+<!ELEMENT pret (#PCDATA)>
+]>
+
+<librarie>
+  <carte categorie="GATIT">
+    <titlu >Everyday Italian</titlu>
+    <pret>30.00</pret>
+  </carte>
+</librarie>
+```
diff --git a/ru-ru/d-ru.html.markdown b/ru-ru/d-ru.html.markdown
index 162ec4c8..bfa3f085 100644
--- a/ru-ru/d-ru.html.markdown
+++ b/ru-ru/d-ru.html.markdown
@@ -1,5 +1,5 @@
 ---
-language: d
+language: D
 filename: learnd-ru.d
 contributors:
     - ["Anton Pastukhov", "http://dprogramming.ru/"]
diff --git a/ru-ru/java-ru.html.markdown b/ru-ru/java-ru.html.markdown
index b24ad555..a1a5cdfc 100644
--- a/ru-ru/java-ru.html.markdown
+++ b/ru-ru/java-ru.html.markdown
@@ -9,7 +9,7 @@ filename: LearnJavaRu.java
 lang: ru-ru
 ---
 
-Java - это объектно ориентированный язык программирования общего назначения,
+Java - это объектно-ориентированный язык программирования общего назначения,
 основанный на классах и поддерживающий параллельное программирование.
 [Подробнее читайте здесь.](http://docs.oracle.com/javase/tutorial/java/index.html)
 
@@ -43,17 +43,41 @@ public class LearnJavaRu {
             " Double: " + 3.14 +
             " Boolean: " + true);
 
-        // Чтобы напечатать что-либо не заканчивая переводом строки
-        // используется System.out.print.
+        // Чтобы печатать что-либо, не заканчивая переводом строки,
+        // используйте System.out.print.
         System.out.print("Hello ");
         System.out.print("World");
 
+        // Используйте System.out.printf() для печати с форматированием
+        System.out.printf("pi = %.5f", Math.PI); // => pi = 3.14159
 
         ///////////////////////////////////////
-        // Типы и Переменные
+        // Переменные
         ///////////////////////////////////////
 
+        /*
+        *  Объявление переменных
+        */
         // Переменные объявляются с использованием <тип> <имя>
+        int fooInt;
+        // Одновременное объявление нескольких переменных одного типа
+        // <type> <name1>, <name2>, <name3>
+        int fooInt1, fooInt2, fooInt3;
+
+        /*
+        *  Инициализация переменных
+        */
+
+        // объявление и инициализация переменной <type> <name> = <val>
+        int fooInt = 1;
+        int fooInt1, fooInt2, fooInt3;
+        // инициализация нескольких переменных одного типа
+        // <type> <name1>, <name2>, <name3> = <val>
+        fooInt1 = fooInt2 = fooInt3 = 1;
+
+        /*
+        *  Типы переменных
+        */
         // Byte - 8-битное целое число.
         // (-128 <= byte <= 127)
         byte fooByte = 100;
@@ -247,7 +271,7 @@ public class LearnJavaRu {
         // Switch Case
         // switch работает с типами byte, short, char и int.
         // Также он работает с перечислениями,
-        // классом String и с некоторыми классами-обертками над
+        // классом String (с Java 7) и с некоторыми классами-обертками над
         // примитивными типами: Character, Byte, Short и Integer.
         int month = 3;
         String monthString;
@@ -319,7 +343,7 @@ public class LearnJavaRu {
         System.out.println("trek info: " + trek.toString());
 
     } // Конец метода main.
-} // Конец класса LearnJava.
+} // Конец класса LearnJavaRu.
 
 
 // Вы можете включать другие, не публичные классы в .java файл.
@@ -362,7 +386,7 @@ class Bicycle {
     // Классы в Java часто реализуют сеттеры и геттеры для своих полей.
 
     // Синтаксис определения метода:
-    // <модификатор> <тип возвращаемого значения> <имя>(<аргументы>)
+    // <модификатор доступа> <тип возвращаемого значения> <имя метода>(<аргументы>)
     public int getCadence() {
         return cadence;
     }
@@ -424,10 +448,10 @@ class PennyFarthing extends Bicycle {
 
 // Интерфейсы
 // Синтаксис определения интерфейса: 
-// <модификатор доступа> interface <имя> extends <базовый интерфейс> {
-//        // Константы
-//        // Определение методов.
-//}
+// <модификатор доступа> interface <имя интерфейса> extends <базовый интерфейс> {
+//     // Константы
+//     // Определение методов
+// }
 
 // Пример - Еда:
 public interface Edible {
diff --git a/ru-ru/markdown-ru.html.markdown b/ru-ru/markdown-ru.html.markdown
index eb8e4881..c41e9676 100644
--- a/ru-ru/markdown-ru.html.markdown
+++ b/ru-ru/markdown-ru.html.markdown
@@ -61,7 +61,7 @@ __И этот тоже.__
 **_И тут!_**
 *__И даже здесь!__*
 
-<!-- В Github Flavored Markdown (версии Markdown, использующейся в Github,
+<!-- В GitHub Flavored Markdown (версии Markdown, использующейся в GitHub,
 для рендеринга Markdown-документов) текст можно сделать зачёркнутым: -->
 
 ~~Зачёркнутый текст.~~
@@ -157,7 +157,7 @@ __И этот тоже.__
 
 Например, можно выделить имя функции `go_to()` прямо посреди текста.
 
-<!-- Github Flavored Markdown позволяет указать для блока кода синтаксис оного.
+<!-- GitHub Flavored Markdown позволяет указать для блока кода синтаксис оного.
 В этом случае синтаксис внутри блока будет подсвечен. Пример: -->
 
 \`\`\`ruby <!-- Только нужно будет убрать символы "\", оставив лишь "```ruby" -->
@@ -167,7 +167,7 @@ end
 \`\`\` <!-- И здесь тоже backslashes нужно убрать, т.е. оставить "```" -->
 
 <-- Обратите внимание: фрагмент, указанный выше, не предваряется отступами,
-поскольку Github сам в состоянии определить границы блока - по строкам "```" -->
+поскольку GitHub сам в состоянии определить границы блока - по строкам "```" -->
 
 <!-- Горизонтальный разделитель (<hr />) -->
 <!-- Разделители добавляются вставкой строки из трёх и более
@@ -253,7 +253,7 @@ end
 \*текст, заключённый в звёздочки!\*
 
 <!-- Таблицы -->
-<!-- Таблицы официально поддерживаются только в Github Flavored Markdown,
+<!-- Таблицы официально поддерживаются только в GitHub Flavored Markdown,
 да и синтаксис имеют не слишком удобный.
 Но если очень нужно, размечайте таблицы так: -->
 
diff --git a/ru-ru/php-ru.html.markdown b/ru-ru/php-ru.html.markdown
index 37b6a86e..d17f24fc 100644
--- a/ru-ru/php-ru.html.markdown
+++ b/ru-ru/php-ru.html.markdown
@@ -32,7 +32,7 @@ print('Hello '); // Напечатать "Hello " без перевода стр
 
 // () необязательно применять для print и echo
 echo "World\n"; // Напечатать "World" и перейти на новую строку.
-// (все утверждения должны заканчиваться ;)
+// (все утверждения должны заканчиваться точкой с запятой)
 
 // Любые символы за пределами закрывающего тега выводятся автоматически:
 ?>
@@ -45,8 +45,8 @@ Hello World Again!
  */
 
 // Переменные начинаются с символа $.
-// Правильное имя переменной начинается с буквы или знака подчеркивания,
-// и может содержать любые цифры, буквы, или знаки подчеркивания.
+// Правильное имя переменной начинается с буквы или символа подчеркивания,
+// за которым следует любое количество букв, цифр или символов подчеркивания.
 // Не рекомендуется использовать кириллические символы в именах (прим. пер.)
 
 // Логические значения нечувствительны к регистру
@@ -55,7 +55,7 @@ $boolean = false; // или FALSE или False
 
 // Целые числа
 $int1 = 12;   // => 12
-$int2 = -12;  // => -12-
+$int2 = -12;  // => -12
 $int3 = 012;  // => 10 (ведущий 0 обозначает восьмеричное число)
 $int4 = 0x0F; // => 15 (ведущие символы 0x означают шестнадцатеричное число)
 
@@ -87,7 +87,7 @@ $dbl_quotes = "This is a $sgl_quotes."; // => 'This is a $String.'
 $escaped   = "This contains a \t tab character.";
 $unescaped = 'This just contains a slash and a t: \t';
 
-// Заключайте переменные в фигурные скобки если это необходимо
+// Заключайте переменные в фигурные скобки, если это необходимо
 $money = "I have $${number} in the bank.";
 
 // Начиная с PHP 5.3, синтаксис nowdocs может использоваться для
@@ -106,6 +106,9 @@ END;
 // Строки соединяются при помощи .
 echo 'This string ' . 'is concatenated';
 
+// echo можно передавать строки как параметры
+echo 'Multiple', 'Parameters', 'Valid'; // печатает 'MultipleParametersValid'
+
 
 /********************************
  * Константы
@@ -114,18 +117,19 @@ echo 'This string ' . 'is concatenated';
 // Константа определяется при помощи define()
 // и никогда не может быть изменена во время выполнения программы!
 
-// Правильное имя константы начинается с буквы или символа подчеркивания,
-// и содержит любое колличество букв, цифр и знаков подчеркивания.
+// Правильное имя константы начинается с буквы или символа подчеркивания
+// и содержит любое колличество букв, цифр или символов подчеркивания.
 define("FOO", "something");
 
-// Доступ к константе возможен через прямое указание её имени
-echo 'This outputs '.FOO;
+// Доступ к константе возможен через прямое указание её имени без знака $
+echo FOO; // печатает 'something'
+echo 'This outputs ' . FOO; // печатает 'This ouputs something'
 
 /********************************
  * Массивы
  */
 
-// Все массивы в PHP - это ассоциативные массивы или хеши,
+// Все массивы в PHP - это ассоциативные массивы
 
 // Ассоциативные массивы, известные в других языках как HashMap.
 
@@ -189,7 +193,7 @@ $b = '0';
 $c = '1';
 $d = '1';
 
-// Утверждение (assert) выдает предупреждение если аргумент не true
+// Утверждение (assert) выдает предупреждение, если его аргумент не true
 
 // Эти сравнения всегда будут истинными, даже если типы будут различаться
 assert($a == $b); // "равно"
@@ -284,35 +288,35 @@ This is displayed otherwise.
 // Использование switch.
 switch ($x) {
     case '0':
-        print 'Switch does type coercion';
-        break; // You must include a break, or you will fall through
-               // to cases 'two' and 'three'
+        print 'Switch использует неточное сравнение';
+        break; // вы должны использовать break, иначе PHP будет продолжать
+               // исполнять команды следующих секций case 'two' и 'three'
     case 'two':
     case 'three':
-        // Do something if $variable is either 'two' or 'three'
+        // делаем что-то, если $x == 'two' или $x == 'three'
         break;
     default:
-        // Do something by default
+        // делаем что-то по умолчанию
 }
 
 // Циклы: while, do...while и for
 $i = 0;
 while ($i < 5) {
     echo $i++;
-}; // Prints "01234"
+}; // печатает "01234"
 
 echo "\n";
 
 $i = 0;
 do {
     echo $i++;
-} while ($i < 5); // Prints "01234"
+} while ($i < 5); // печатает "01234"
 
 echo "\n";
 
 for ($x = 0; $x < 10; $x++) {
     echo $x;
-} // Напечатает "0123456789"
+} // печатает "0123456789"
 
 echo "\n";
 
@@ -335,17 +339,17 @@ echo "\n";
 $i = 0;
 while ($i < 5) {
     if ($i === 3) {
-        break; // Exit out of the while loop
+        break; // выйти из цикла while
     }
     echo $i++;
 } // Напечатает "012"
 
 for ($i = 0; $i < 5; $i++) {
     if ($i === 3) {
-        continue; // Skip this iteration of the loop
+        continue; // пропустить текущую итерацию цикла
     }
     echo $i;
-} // Напечатает "0124"
+} // печатает "0124"
 
 
 /********************************
@@ -360,7 +364,7 @@ function my_function () {
 echo my_function(); // => "Hello"
 
 // Правильное имя функции начинается с буквы или символа подчеркивания
-// и состоит из букв, цифр или знаков подчеркивания.
+// и состоит из букв, цифр или символов подчеркивания.
 
 function add ($x, $y = 1) { // $y по умолчанию равно 1
   $result = $x + $y;
@@ -656,7 +660,10 @@ $cls = new SomeOtherNamespace\MyClass();
 ```
 
 ## Смотрите также:
-Посетите страницу [официальной документации PHP](http://www.php.net/manual/) для справки. 
+Посетите страницу [официальной документации PHP](http://www.php.net/manual/) для справки.
+
 Если вас интересуют полезные приемы использования PHP посетите [PHP The Right Way](http://www.phptherightway.com/).
+
 Если вы раньше пользовались языком с хорошей организацией пакетов, посмотрите [Composer](http://getcomposer.org/).
+
 Для изучения стандартов использования языка посетите PHP Framework Interoperability Group's [PSR standards](https://github.com/php-fig/fig-standards). 
diff --git a/ru-ru/tmux-ru.html.markdown b/ru-ru/tmux-ru.html.markdown
new file mode 100644
index 00000000..aa7545cc
--- /dev/null
+++ b/ru-ru/tmux-ru.html.markdown
@@ -0,0 +1,252 @@
+---
+category: tool
+tool: tmux
+contributors:
+  - ["mdln", "https://github.com/mdln"]
+translators:
+  - ["Davydov Anton", "https://github.com/davydovanton"]
+filename: LearnTmux-ru.txt
+lang: ru-ru
+---
+
+[tmux](http://tmux.sourceforge.net) - терминальный мультиплексор.
+Он позволяет создавать, получать доступ и контролировать любое
+количество терминалов из единого окна.
+Сессия tmux также может быть свернута в фоновый режим, и она
+будет работать в фоне, а после к ней можно будет подключиться.
+
+
+```
+
+  tmux [command]     # Запуск команды 'tmux'
+                     # без какой-либо команды создаст новую сессию
+
+    new              # Создать новую сессию
+     -s "Session"    # Создать именованную сессию
+     -n "Window"     # Создать именованное окно
+     -c "/dir"       # Запустить сессию в конкретной директории
+
+    attach           # Подключиться к последней/существующей сессии
+     -t "№"          # Подключиться к определенной сессии
+     -d              # Завершить определенную сессию
+
+    ls               # Список открытых сессий
+     -a              # Список всех открытых сессий
+
+    lsw              # Список окон
+     -a              # Список всех окон
+     -s              # Список всех окон в сессии
+
+    lsp              # Список панелей
+     -a              # Список всех панелей
+     -s              # Список всех панелей в сессии
+     -t              # Список всех панелей для конкретного объекта
+
+    kill-window      # Закрыть текущее окно
+     -t "#"          # Закрыть конкретное окно
+     -a              # Закрыть все окна
+     -a -t "#"       # Закрыть все окна, кроме конкретного
+
+    kill-session     # Завершить текущую сессию
+     -t "#"          # Завершить конкретную сессию
+     -a              # Завершить все сессии
+     -a -t "#"       # Завершить все сессии, кроме конкретной
+
+```
+
+
+### "Горячие" клавиши
+
+Способ, с помощью которого контролируется любая tmux
+сессия, - комбинация клавиш, называемая 'Префиксом'.
+
+```
+----------------------------------------------------------------------
+  (C-b) = Ctrl + b    # 'Префикс' необходим для
+                      # использования горячих клавиш
+
+  (M-1) = Meta + 1 -или- Alt + 1
+----------------------------------------------------------------------
+
+  ?                    # Список всех горячих клавиш
+  :                    # Начать ввод в командной строке tmux
+  r                    # Принудительная перерисовка текущего клиента
+  c                    # Создать новое окно
+
+  !                    # Переместить текущую панель в отдельное окно
+  %                    # Разделить текущую панель на две: левую и правую
+  "                    # Разделить текущую панель на две: верхнюю и нижнюю
+
+  n                    # Переместиться на следующее окно
+  p                    # Переместиться на предыдущее окно
+  {                    # Заменить текущую панель на предыдущую
+  }                    # Заменить текущую панель на следующую
+
+  s                    # Интерактивный выбор запущенных сессий
+  w                    # Интерактивный выбор текущего окна
+  от 0 до 9            # Выбрать окно номер 0..9
+
+  d                    # Отключить текущий клиент
+  D                    # Выбрать клиент, который будет отключен
+
+  &                    # Закрыть текущее окно
+  x                    # Закрыть текущую панель
+
+  Стрелки вверх, вниз  # Переместиться на панель выше, ниже, левее
+  влево, вправо        # или правее
+
+  M-1 to M-5           # Расставить панели:
+                         # 1) выровнять по горизонтали
+                         # 2) выровнять по вертикали
+                         # 3) основное горизонтально
+                         # 4) основное вертикально
+                         # 5) мозаикой
+
+  C-Up, C-Down         # Изменение размера текущей панели с шагом в одну
+  C-Left, C-Right      # колонку
+
+  M-Up, M-Down         # Изменение размера текущей панели с шагом в пять
+  M-Left, M-Right      # колонок
+
+```
+
+
+### Настройка ~/.tmux.conf
+
+Файл tmux.conf может быть использован для автоматической установки
+опций при старте, как, например, .vimrc или init.el.
+
+```
+# Пример файла tmux.conf
+# 2014.10
+
+
+### Общее
+###########################################################################
+
+# Включить поддержку UTF-8
+setw -g utf8 on
+set-option -g status-utf8 on
+
+# Установить лимит истории
+set -g history-limit 2048
+
+# Порядковый номер первой панели
+set -g base-index 1
+
+# Включить поддержку мыши
+set-option -g mouse-select-pane on
+
+# Принудительная перезагрузка конфигурационного файла
+unbind r
+bind r source-file ~/.tmux.conf
+
+
+### Горячие клавиши
+###########################################################################
+
+# Отменить комбинацию C-b как стандартный префикс
+unbind C-b
+
+# Установить новую комбинацию как префикс
+set-option -g prefix `
+
+# Вернуть предыдущее окно, если префикс был нажат два раза
+bind C-a last-window
+bind ` last-window
+
+# Разрешить замену C-a и ` на F11/F12
+bind F11 set-option -g prefix C-a
+bind F12 set-option -g prefix `
+
+# Настройки клавиш
+setw -g mode-keys vi
+set-option -g status-keys vi
+
+# Перемещение между панелями, как в vim
+bind h select-pane -L
+bind j select-pane -D
+bind k select-pane -U
+bind l select-pane -R
+
+# Переключить/Заменить окно
+bind e previous-window
+bind f next-window
+bind E swap-window -t -1
+bind F swap-window -t +1
+
+# Комманды, упрощающие разделением панелей
+bind = split-window -h
+bind - split-window -v
+unbind '"'
+unbind %
+
+# Активировать центральную сессию (когда вложенный tmux) для отправки команд
+bind a send-prefix
+
+
+### Цветовая схема
+###########################################################################
+
+# Цветовая палитра строки состояния
+set-option -g status-justify left
+set-option -g status-bg black
+set-option -g status-fg white
+set-option -g status-left-length 40
+set-option -g status-right-length 80
+
+# Цветовая палитра окантовки панели
+set-option -g pane-active-border-fg green
+set-option -g pane-active-border-bg black
+set-option -g pane-border-fg white
+set-option -g pane-border-bg black
+
+# Цветовая палитра сообщений
+set-option -g message-fg black
+set-option -g message-bg green
+
+# Цветовая палитра статус окна
+setw -g window-status-bg black
+setw -g window-status-current-fg green
+setw -g window-status-bell-attr default
+setw -g window-status-bell-fg red
+setw -g window-status-content-attr default
+setw -g window-status-content-fg yellow
+setw -g window-status-activity-attr default
+setw -g window-status-activity-fg yellow
+
+
+### Интерфейс
+###########################################################################
+
+# Уведомления
+setw -g monitor-activity on
+set -g visual-activity on
+set-option -g bell-action any
+set-option -g visual-bell off
+
+# Автоматическая установка заголовка окна
+set-option -g set-titles on
+set-option -g set-titles-string '#H:#S.#I.#P #W #T' # window number,program name,active (or not)
+
+# Настройки строки состояния
+set -g status-left "#[fg=red] #H#[fg=green]:#[fg=white]#S#[fg=green] |#[default]"
+
+# Показывать системные характеристики в статусбаре
+# Требует https://github.com/thewtex/tmux-mem-cpu-load/
+set -g status-interval 4
+set -g status-right "#[fg=green] | #[fg=white]#(tmux-mem-cpu-load)#[fg=green] | #[fg=cyan]%H:%M #[default]"
+
+```
+
+### Ссылки
+
+[Tmux | Домашняя страница](http://tmux.sourceforge.net)
+
+[Страница мануала Tmux](http://www.openbsd.org/cgi-bin/man.cgi/OpenBSD-current/man1/tmux.1?query=tmux)
+
+[Gentoo Wiki](http://wiki.gentoo.org/wiki/Tmux)
+
+[Archlinux Wiki](https://wiki.archlinux.org/index.php/Tmux)
+
+[Отображение CPU/MEM % в статусбаре](https://stackoverflow.com/questions/11558907/is-there-a-better-way-to-display-cpu-usage-in-tmux)
diff --git a/ru-ru/typescript-ru.html.markdown b/ru-ru/typescript-ru.html.markdown
new file mode 100644
index 00000000..67b58a38
--- /dev/null
+++ b/ru-ru/typescript-ru.html.markdown
@@ -0,0 +1,173 @@
+---
+language: TypeScript
+lang: ru-ru
+contributors:
+    - ["Philippe Vlérick", "https://github.com/pvlerick"]
+translators:
+    - ["Fadil Mamedov", "https://github.com/fadilmamedov"]
+    - "Andre Polykanine", "https://github.com/Oire"]
+filename: learntypescript-ru.ts
+---
+
+TypeScript — это язык программирования, целью которого является лёгкая разработка широкомасштабируемых JavaScript-приложений.
+TypeScript добавляет в Javascript общие концепции, такие, как классы, модули, интерфейсы, обобщённое программирование и (опционально) статическую типизацию.  
+Это надмножество языка JavaScript: весь JavaScript-код является валидным TypeScript-кодом, следовательно, может быть добавлен бесшовно в любой проект. 
+Компилятор TypeScript генерирует JavaScript-код.
+
+Эта статья концентрируется только на синтаксисе TypeScript, в противовес статье о [JavaScript](javascript-ru/).
+
+Для тестирования компилятора TypeScript пройдите по ссылке в [песочницу](http://www.typescriptlang.org/Playground). 
+Там вы можете написать код (с поддержкой автодополнения) и сразу же увидеть сгенерированный JavaScript код.
+
+```js
+// В TypeScript есть 3 базовых типа
+var isDone: boolean = false;
+var lines: number = 42;
+var name: string = "Андерс";
+
+// Тип «any» для случаев, когда заранее неизвестен тип переменной
+var notSure: any = 4;
+notSure = "а может быть, строка";
+notSure = false; // а теперь логический тип
+
+// Для коллекций есть типизированные массивы и обобщённые массивы
+var list: number[] = [1, 2, 3];
+// Как альтернатива, использование обобщённого массива
+var list: Array<number> = [1, 2, 3];
+
+// Перечисления:
+enum Color {Red, Green, Blue};
+var c: Color = Color.Green;
+
+// Наконец, «void» используется для обозначения того, что функция ничего не возвращает
+function bigHorribleAlert(): void {
+  alert("Я маленькое надоедливое окошко!");
+}
+
+// Функции — это объекты первого класса. Они поддерживают лямбда-синтаксис (=>)
+// и используют вывод типов (type inference)
+
+// Следующие строки кода являются эквивалентными, компилятором предполагается
+// одинаковая сигнатура, на выходе генерируется одинаковый JavaScript-код
+var f1 = function(i: number): number { return i * i; }
+// Предполагается возвращаемый тип
+var f2 = function(i: number) { return i * i; }
+var f3 = (i: number): number => { return i * i; }
+// Предполагается возвращаемый тип
+var f4 = (i: number) => { return i * i; }
+// Предполагается возвращаемый тип, в однострочной функции ключевое слово «return» не нужно
+var f5 = (i: number) =>  i * i;
+
+// Интерфейсы являются структурными; всё, что имеет свойства, совместимо с интерфейсом
+interface Person {
+  name: string;
+  // Опциональные свойства, помеченные символом «?»
+  age?: number;
+  // И, конечно, функции
+  move(): void;
+}
+
+// Объект, который реализует интерфейс «Person»
+// К нему можно обращаться, как к «Person», так как он имеет свойства «name» и «move»
+var p: Person = { name: "Бобби", move: () => {} };
+// Объекты, которые могут иметь опциональные свойства:
+var validPerson: Person = { name: "Бобби", age: 42, move: () => {} };
+// Это не «Person», поскольку «age» не является числовым значением
+var invalidPerson: Person = { name: "Бобби", age: true };
+
+// Интерфейсы могут также описывать функциональный тип
+interface SearchFunc {
+  (source: string, subString: string): boolean;
+}
+// Важны только типы параметров, имена — нет.
+var mySearch: SearchFunc;
+mySearch = function(src: string, sub: string) {
+  return src.search(sub) != -1;
+}
+
+// Классы. Члены класса по умолчанию являются публичными
+class Point {
+  	// Свойства
+    x: number;
+
+    // Конструктор — ключевые слова public/private в данном контексте сгенерируют
+    // шаблонный код для свойства и для инициализации в конструкторе
+    // В данном примере «y» будет определён так же, как и «x», но меньшим количеством кода
+    // Значения по умолчанию также поддерживаются
+
+    constructor(x: number, public y: number = 0) {
+        this.x = x;
+    }
+
+    // Функции
+    dist() { return Math.sqrt(this.x * this.x + this.y * this.y); }
+
+    // Статические члены
+    static origin = new Point(0, 0);
+}
+
+var p1 = new Point(10 ,20);
+var p2 = new Point(25); //y будет равен 0
+
+// Наследование
+class Point3D extends Point {
+    constructor(x: number, y: number, public z: number = 0) {
+        super(x, y); // Явный вызов конструктора базового класса обязателен
+    }
+
+    // Перегрузка
+    dist() {
+        var d = super.dist();
+        return Math.sqrt(d * d + this.z * this.z);
+    }
+}
+
+// Модули, знак «.» может быть использован как разделитель для обозначения подмодулей
+module Geometry {
+  export class Square {
+    constructor(public sideLength: number = 0) {
+    }
+    area() {
+      return Math.pow(this.sideLength, 2);
+    }
+  }
+}
+
+var s1 = new Geometry.Square(5);
+
+// Локальный псевдоним для ссылки на модуль
+import G = Geometry;
+
+var s2 = new G.Square(10);
+
+// Обобщённое программирование
+// Классы
+class Tuple<T1, T2> {
+    constructor(public item1: T1, public item2: T2) {
+    }
+}
+
+// Интерфейсы
+interface Pair<T> {
+    item1: T;
+    item2: T;
+}
+
+// И функции
+var pairToTuple = function<T>(p: Pair<T>) {
+    return new Tuple(p.item1, p.item2);
+};
+
+var tuple = pairToTuple({ item1:"hello", item2:"world"});
+
+// Включение ссылки на файл определения:
+/// <reference path="jquery.d.ts" />
+
+```
+
+## Для дальнейшего чтения
+ * [Официальный веб-сайт TypeScript](http://www.typescriptlang.org/)
+ * [Спецификация языка TypeScript (pdf)](http://go.microsoft.com/fwlink/?LinkId=267238)
+ * [Anders Hejlsberg — Introducing TypeScript на Channel 9](http://channel9.msdn.com/posts/Anders-Hejlsberg-Introducing-TypeScript)
+ * [Исходный код на GitHub](https://github.com/Microsoft/TypeScript)
+ * [Definitely Typed — репозиторий определений типов](http://definitelytyped.org/)
diff --git a/self.html.markdown b/self.html.markdown
index 9290a0c9..fc7f69db 100644
--- a/self.html.markdown
+++ b/self.html.markdown
@@ -60,7 +60,7 @@ also sending the message 'true' to the lobby."
 
 # Sending messages to objects
 
-Messages can either be unary, binary or keyword. Precedence is in that order. Unlike Smalltalk, the precedence of binary messages must be specified, and all keywords after the first must start with a capital letter. Messages are separeated from their destination by whitespace.
+Messages can either be unary, binary or keyword. Precedence is in that order. Unlike Smalltalk, the precedence of binary messages must be specified, and all keywords after the first must start with a capital letter. Messages are separated from their destination by whitespace.
 
 ```
 "unary message, sends 'printLine' to the object '23'
diff --git a/smalltalk.html.markdown b/smalltalk.html.markdown
index 3b388505..2c17b753 100644
--- a/smalltalk.html.markdown
+++ b/smalltalk.html.markdown
@@ -37,7 +37,7 @@ Feedback highly appreciated! Reach me at [@jigyasa_grover](https://twitter.com/j
 
 `"Comments are enclosed in quotes"`
 
-`"Period (.) is the statement seperator"`
+`"Period (.) is the statement separator"`
 
 ## Transcript:
 ```
@@ -305,7 +305,7 @@ result := (switch at: $B) value.
 x := 4. y := 1.
 [x > 0] whileTrue: [x := x - 1. y := y * 2].                "while true loop"
 [x >= 4] whileFalse: [x := x + 1. y := y * 2].              "while false loop"
-x timesRepeat: [y := y * 2].                                "times repear loop (i := 1 to x)"
+x timesRepeat: [y := y * 2].                                "times repeat loop (i := 1 to x)"
 1 to: x do: [:a | y := y * 2].                              "for loop"
 1 to: x by: 2 do: [:a | y := y / 2].                        "for loop with specified increment"
 #(5 4 3) do: [:a | x := x + a].                             "iterate over array elements"
@@ -320,7 +320,7 @@ y := x isUppercase.                                         "test if upper case"
 y := x isLetter.                                            "test if letter"
 y := x isDigit.                                             "test if digit"
 y := x isAlphaNumeric.                                      "test if alphanumeric"
-y := x isSeparator.                                         "test if seperator char"
+y := x isSeparator.                                         "test if separator char"
 y := x isVowel.                                             "test if vowel"
 y := x digitValue.                                          "convert to numeric digit value"
 y := x asLowercase.                                         "convert to lower case"
diff --git a/sv-se/json-sv.html.markdown b/sv-se/json-sv.html.markdown
new file mode 100644
index 00000000..c2ee36dd
--- /dev/null
+++ b/sv-se/json-sv.html.markdown
@@ -0,0 +1,62 @@
+---
+language: json
+filename: learnjson-sv.json
+contributors:
+  - ["Anna Harren", "https://github.com/iirelu"]
+  - ["Marco Scannadinari", "https://github.com/marcoms"]
+translators:
+  - ["Lari Kovanen", "https://github.com/larkov"]
+lang: sv-se
+---
+
+Eftersom JSON är ett extremt lätt data-utbytes format så kommer detta
+förmodligen att vara den lättaste "Learn X in Y Minutes" någonsin.
+
+JSON i dess renaste form har inga kommentarer, men de flesta tolkarna accepterar
+C-stils (`//`, `/* */`) kommentarer. Detta dokument kommer dock att tillämpa
+100% giltigt JSON. Lyckligtvis så är resten av dokumentet självförklarande.
+
+
+```json
+{
+  "nyckel": "värde",
+
+  "nycklar": "måste alltid omslutas med dubbla citationstecken",
+  "nummer": 0,
+  "strängar": "Alla unicode-tecken (inklusive \"escaping\") är tillåtna.",
+  "boolska värden?": true,
+  "nullvärden": null,
+
+  "stora tal": 1.2e+100,
+
+  "objekt": {
+    "kommentar": "De flesta datastukturerna i JSON kommer i form av objekt.",
+
+    "matris": [0, 1, 2, 3, "Matriser kan innehålla vad som helst.", 5],
+
+    "ytterligare objekt": {
+      "kommentar": "Objekten kan vara nästlade."
+    }
+  },
+
+  "trams": [
+    {
+      "kaliumkällor": ["bananer"]
+    },
+    [
+      [1, 0, 0, 0],
+      [0, 1, 0, 0],
+      [0, 0, 1, "neo"],
+      [0, 0, 0, 1]
+    ]
+  ],
+
+  "alternativ formatering": {
+    "kommentar": "kolla på detta!"
+  , "kommats position": "spelar ingen roll - så länge det kommer innan värdet"
+  , "en kommentar till": "vad fint"
+  },
+
+  "det var kort": "Nu är du klar och kan allt vad JSON har att erbjuda."
+}
+```
diff --git a/swift.html.markdown b/swift.html.markdown
index 46768375..e921e7ea 100644
--- a/swift.html.markdown
+++ b/swift.html.markdown
@@ -94,6 +94,8 @@ var unwrappedString: String! = "Value is expected."
 // same as above, but ! is a postfix operator (more syntax candy)
 var unwrappedString2: ImplicitlyUnwrappedOptional<String> = "Value is expected."
 
+// If let structure - 
+// If let is a special structure in Swift that allows you to check if an Optional rhs holds a value, and in case it does - unwraps and assigns it to the lhs.
 if let someOptionalStringConstant = someOptionalString {
     // has `Some` value, non-nil
     if !someOptionalStringConstant.hasPrefix("ok") {
diff --git a/tr-tr/markdown-tr.html.markdown b/tr-tr/markdown-tr.html.markdown
index bac8f6fc..b8f11e39 100644
--- a/tr-tr/markdown-tr.html.markdown
+++ b/tr-tr/markdown-tr.html.markdown
@@ -52,7 +52,7 @@ __Bu yazı da kalın.__
 **_Bu da öyle!_**
 *__Hatta bu bile!__*
 
-<!-- Github Flavored Markdown'da ayrıca üstü çizgili karakter de desteklenir: -->
+<!-- GitHub Flavored Markdown'da ayrıca üstü çizgili karakter de desteklenir: -->
 ~~Bu yazı üstü çizili olarak gözükecek.~~
 
 <!-- Paragraflar bir veya daha fazla boş satırla ayrılır. -->
@@ -151,7 +151,7 @@ kullanabilirsiniz -->
 
 Ahmet `go_to()` fonksiyonun ne yaptığını bilmiyor!
 
-<!-- Github Flavored Markdown'da, kod içerisinde aydınlatma kullanabilirsiniz -->
+<!-- GitHub Flavored Markdown'da, kod içerisinde aydınlatma kullanabilirsiniz -->
 
 \`\`\`ruby <!-- buradaki ters slaş (\) işaretlerini kullanmayın, sadece ```ruby ! -->
 def foobar
@@ -159,7 +159,7 @@ def foobar
 end
 \`\`\` <!-- burada da (\) işaretlerini kullanmayın, sadece ``` -->
 
-<!-- Yukarıdaki örnekte girinti kullanmanıza gerek yok, Github da 
+<!-- Yukarıdaki örnekte girinti kullanmanıza gerek yok, GitHub da 
 ``` işaretinden sonra belirttiğiniz yazılım diline göre gerekli
 syntax aydınlatmaları uygulanacaktır -->
 
@@ -230,7 +230,7 @@ Bu yazının *yıldızlar arasında gözükmesini* istiyorum fakat italik olmama
 bunun için, şu şekilde: \*bu yazı italik değil, yıldızlar arasında\*.
 
 <!-- Tablolar -->
-<!-- Tablolar sadece Github Flavored Markdown'da destekleniyor ve açıkçası
+<!-- Tablolar sadece GitHub Flavored Markdown'da destekleniyor ve açıkçası
 performansı çok yoruyorlar, fakat illa ki kullanmak isterseniz: -->
 
 | Sütun1       | Sütun 2  | Sütün 3       |
diff --git a/uk-ua/java-ua.html.markdown b/uk-ua/java-ua.html.markdown
new file mode 100644
index 00000000..1ea30f3d
--- /dev/null
+++ b/uk-ua/java-ua.html.markdown
@@ -0,0 +1,783 @@
+---
+language: java
+contributors:
+    - ["Jake Prather", "http://github.com/JakeHP"]
+    - ["Jakukyo Friel", "http://weakish.github.io"]
+    - ["Madison Dickson", "http://github.com/mix3d"]
+    - ["Simon Morgan", "http://sjm.io/"]
+    - ["Zachary Ferguson", "http://github.com/zfergus2"]
+    - ["Cameron Schermerhorn", "http://github.com/cschermerhorn"]
+    - ["Rachel Stiyer", "https://github.com/rstiyer"]
+translators:
+    - ["Oleksandr Tatarchuk", "https://github.com/tatarchuk"]
+    - ["Andre Polykanine", "https://github.com/Oire"]
+filename: LearnJavaUa.java
+lang: uk-ua
+---
+
+Java є об’єктно-орієнтованою мовою програмування загального призначення з підтримкою паралельного програмування, яка базується на класах.
+[Детальніше читайте тут, англ.](http://docs.oracle.com/javase/tutorial/java/)
+
+```java
+// Однорядковий коментар починається з //
+/*
+Багаторядковий коментар виглядає так.
+*/
+/**
+JavaDoc-коментар виглядає так. Використовується для опису класу та членів класу.
+*/
+
+// Імпорт класу ArrayList з пакета java.util
+import java.util.ArrayList;
+// Імпорт усіх класів з пакета java.security 
+import java.security.*;
+
+// Кожний .java файл містить один зовнішній публічний клас, ім’я якого співпадає
+// з іменем файлу.
+public class LearnJava {
+
+    // Для запуску програма, написана на java, повинна мати точку входу у вигляді методу main.
+    public static void main (String[] args) {
+
+        // Використання System.out.println() для виводу на друк рядків.
+        System.out.println("Привіт, світе!");
+        System.out.println(
+            " Ціле число: " + 10 +
+            " Число з рухомою комою подвійної точности: " + 3.14 +
+            " Булеве значення: " + true);
+
+        // Для друку без переходу на новий рядок використовується System.out.print().
+        System.out.print("Привіт, ");
+        System.out.print("світе");
+
+        // Використання System.out.printf() для простого форматованого виводу на друк.
+        System.out.printf("pi = %.5f", Math.PI); // => pi = 3.14159
+
+        ///////////////////////////////////////
+        // Змінні
+        ///////////////////////////////////////
+
+        /*
+        *  Оголошення змінних
+        */
+        // Для оголошення змінних використовується формат <тип> <змінна>
+        int fooInt;
+        // Оголошення декількох змінних одного типу <тип> <ім’я1>, <ім’я2>, <ім’я3>
+        int fooInt1, fooInt2, fooInt3;
+
+        /*
+        *  Ініціалізація змінних
+        */
+
+        // Ініціалізація змінної з використанням формату <тип> <ім’я> = <значення>
+        int fooInt = 1;
+        // Ініціалізація декількох змінних одного типу з одним значенням <тип> <ім’я1>, <ім’я2>, <ім’я3> = <значення>
+        int fooInt1, fooInt2, fooInt3;
+        fooInt1 = fooInt2 = fooInt3 = 1;
+
+        /*
+        *  Типи змінних
+        */
+        // Байт — 8-бітне ціле число зі знаком
+        // (-128 <= byte <= 127)
+        byte fooByte = 100;
+
+        // Short — 16-бітне ціле число зі знаком
+        // (-32 768 <= short <= 32 767)
+        short fooShort = 10000;
+
+        // Integer — 32-бітне ціле число зі знаком
+        // (-2 147 483 648 <= int <= 2 147 483 647)
+        int fooInt = 1;
+
+        // Long — 64-бітне ціле число зі знаком
+        // (-9 223 372 036 854 775 808 <= long <= 9 223 372 036 854 775 807)
+        long fooLong = 100000L;
+        // L використовується для позначення того, що число має тип Long;
+        // інакше число буде трактуватись як integer.
+
+        // Примітка: Java не має беззнакових типів.
+
+        // Float — 32-бітне число з рухомою комою одиничної точності за стандартом IEEE 754 
+        // 2^-149 <= float <= (2-2^-23) * 2^127
+        float fooFloat = 234.5f;
+        // f або F використовується для позначення того, що змінна має тип float;
+        // інакше трактується як double.
+
+        // Double — 64-бітне число з рухомою комою подвійної точності за стандартом IEEE 754 
+        // 2^-1074 <= x <= (2-2^-52) * 2^1023
+        double fooDouble = 123.4;
+
+        // Boolean — true & false (істина чи хиба)
+        boolean fooBoolean = true;
+        boolean barBoolean = false;
+
+        // Char — 16-бітний символ Unicode
+        char fooChar = 'A';
+
+        // final - посилання на такі змінні не можуть бути присвоєні іншим об’єктам,
+        final int HOURS_I_WORK_PER_WEEK = 9001;
+        // але вони можуть мати відкладену ініціалізацію.
+        final double E;
+        E = 2.71828;
+
+
+        // BigInteger -Незмінні знакові цілі числа довільної точності
+        //
+        // BigInteger є типом даних, який дає можливість розробнику виконувати операції
+        // з цілими числами, розрядність яких більша за 64 біти. Числа зберігаються у масиві
+        // байтів, операції над ними виконуються функціями, які мають клас BigInteger
+        //
+        // BigInteger можна ініціалізувати, використовуючи масив байтів чи рядок.
+        
+        BigInteger fooBigInteger = new BigInteger(fooByteArray);
+
+
+        // BigDecimal — Незмінні знакові дробові числа довільної точності
+        //
+        // BigDecimal складається з двох частин: цілого числа довільної точності 
+        // з немасштабованим значенням та 32-бітного масштабованого цілого числа
+        //
+        // BigDecimal дозволяє розробникам контролювати десяткове округлення.
+        // Рекомендовано використовувати BigDecimal зі значеннями валют
+        // і там, де необхідна точність дробових обчислень.
+        //
+        // BigDecimal може бути ініціалізований типами даних int, long, double або String
+        // чи немасштабованим значенням (BigInteger) і масштабованим значенням (int).
+
+        BigDecimal fooBigDecimal = new BigDecimal(fooBigInteger, fooInt);
+        
+        // Для дотримання заданої точності рекомендується використовувати
+        // конструктор, який приймає String 
+        
+        BigDecimal tenCents = new BigDecimal("0.1");
+
+
+        // Рядки
+        String fooString = "Це мій рядок!";
+
+        // \n є символом переходу на новий рядок
+        String barString = "Друк з нового рядка?\nНема питань!";
+        // \t — це символ табуляції
+        String bazString = "Хочете додати табуляцію?\tТримайте!";
+        System.out.println(fooString);
+        System.out.println(barString);
+        System.out.println(bazString);
+
+        // Масиви
+        // Розмір масиву має бути визначений перед ініціалізацією
+        // Наведений формат ілюструє ініціалізацію масивів
+        // <тип даних>[] <ім’я змінної> = new <тип даних>[<розмір масиву>];
+        // <тип даних> <ім’я змінної>[] = new <тип даних>[<розмір масиву>];
+        int[] intArray = new int[10];
+        String[] stringArray = new String[1];
+        boolean boolArray[] = new boolean[100];
+
+        // Інший шлях оголошення та ініціалізації масиву
+        int[] y = {9000, 1000, 1337};
+        String names[] = {"Bob", "John", "Fred", "Juan Pedro"};
+        boolean bools[] = new boolean[] {true, false, false};
+
+        // Індексація масиву — доступ за елементами
+        System.out.println("intArray @ 0: " + intArray[0]);
+
+        // Масиви є змінними та мають нульовий елемент.
+        intArray[1] = 1;
+        System.out.println("intArray @ 1: " + intArray[1]); // => 1
+
+        // Додатково
+        // ArrayLists — Схожі на масив, але мають більший функціонал та змінний розмір.
+        // LinkedLists — Реалізація двозв’язного списку. Всі операції
+        //               виконуються так, як очікується від
+        //               двозв’язного списку.
+        // Maps — Множина об’єктів, які пов’язують ключ зі значенням. Map є
+        //        інтерфейсом, тому не може бути успадкований.
+        //        Типи ключів і значень, які зберігаються в Map, мають
+        //        вказуватись у класі, який його реалізує.
+		//		  Ключ не може повторюватись і пов’язаний лише з одним значенням        
+        // HashMaps — Цей клас використовує хеш-таблицю для реалізації інтерфейсу Map.
+        //            Це дозволяє виконувати певні операції,
+        //            такі, як отримання та вставка елемента,
+        //            залишаючись постійними навіть для великої кількості елементів.
+
+        ///////////////////////////////////////
+        // Оператори
+        ///////////////////////////////////////
+        System.out.println("\n->Оператори");
+
+        int i1 = 1, i2 = 2; // Коротка форма присвоєння
+
+        // Арифметичні операції виконуються очевидним способом
+        System.out.println("1+2 = " + (i1 + i2)); // => 3
+        System.out.println("2-1 = " + (i2 - i1)); // => 1
+        System.out.println("2*1 = " + (i2 * i1)); // => 2
+        System.out.println("1/2 = " + (i1 / i2)); // => 0 (int/int повертається як int)
+        System.out.println("1/2 = " + (i1 / (double)i2)); // => 0.5
+
+        // Ділення з остачею
+        System.out.println("11%3 = "+(11 % 3)); // => 2
+
+        // Оператори порівняння
+        System.out.println("3 == 2? " + (3 == 2)); // => false
+        System.out.println("3 != 2? " + (3 != 2)); // => true
+        System.out.println("3 > 2? " + (3 > 2)); // => true
+        System.out.println("3 < 2? " + (3 < 2)); // => false
+        System.out.println("2 <= 2? " + (2 <= 2)); // => true
+        System.out.println("2 >= 2? " + (2 >= 2)); // => true
+
+        // Логічні оператори
+        System.out.println("3 > 2 && 2 > 3? " + ((3 > 2) && (2 > 3))); // => false
+        System.out.println("3 > 2 || 2 > 3? " + ((3 > 2) || (2 > 3))); // => true
+        System.out.println("!(3 == 2)? " + (!(3 == 2))); // => true
+
+        // Бітові оператори!
+        /*
+        ~      Унарне бітове доповнення
+        <<     Знаковий зсув уліво
+        >>     Знаковий/Арифметичний зсув управо
+        >>>    Беззнаковий/Логічний зсув управо
+        &      Бітове І
+        ^      Бітови виключне АБО
+        |      Бітове АБО
+        */
+
+        // Інкремент
+        int i = 0;
+        System.out.println("\n->Інкремент/Декремент");
+        // Оператори ++ і -- здійснюють інкремент та декремент ретроспективно.
+        // Якщо вони розташовані перед змінною, операція виконається перед поверненням;
+        // якщо після неї — повернеться інкремент або декремент.
+        System.out.println(i++); // i = 1, друкує 0 (постінкремент)
+        System.out.println(++i); // i = 2, друкує 2 (преінкремент)
+        System.out.println(i--); // i = 1, друкує 2 (постдекремент)
+        System.out.println(--i); // i = 0, друкує 0 (предекремент)
+
+        ///////////////////////////////////////
+        // Керуючі конструкції
+        ///////////////////////////////////////
+        System.out.println("\n->Керуючі конструкції");
+
+        // Оператор if використовується так само, як у мові C
+        int j = 10;
+        if (j == 10) {
+            System.out.println("Це надрукується");
+        } else if (j > 10) {
+            System.out.println("А це — ні");
+        } else {
+            System.out.println("Це — також ні");
+        }
+
+        // Цикл з передумовою While
+        int fooWhile = 0;
+        while(fooWhile < 100) {
+            System.out.println(fooWhile);
+            // Інкремент лічильника
+            // Виконається 100 разів, fooWhile 0,1,2...99
+            fooWhile++;
+        }
+        System.out.println("fooWhile Value: " + fooWhile);
+
+        // Цикл з післяумовою Do While
+        int fooDoWhile = 0;
+        do {
+            System.out.println(fooDoWhile);
+            // Інкремент лічильника
+            // Виконається 99 разів, fooDoWhile 0->99
+            fooDoWhile++;
+        } while(fooDoWhile < 100);
+        System.out.println("Значення fooDoWhile: " + fooDoWhile);
+
+        // Цикл з параметром For
+        // структура циклу => for(<початковий стан>; <умова завершення>; <крок>)
+        for (int fooFor = 0; fooFor < 10; fooFor++) {
+            System.out.println(fooFor);
+            // Виконається 10 разів, fooFor 0->9
+        }
+        System.out.println("Значення fooFor: " + fooFor);
+        
+        // Вихід із вкладеного циклу через мітку
+        outer:
+        for (int i = 0; i < 10; i++) {
+          for (int j = 0; j < 10; j++) {
+            if (i == 5 && j ==5) {
+              break outer;
+              // вихід із зовнішнього циклу, а не лише внутрішнього
+            }
+          }
+        }
+        
+        // Цикл For Each
+        // Призначений для перебору масивів та колекцій       
+        int[] fooList = {1, 2, 3, 4, 5, 6, 7, 8, 9};       
+
+        for (int bar : fooList) {
+            System.out.println(bar);
+            // Повторюється 9 разів та друкує числа від 1 до 9 на нових рядках
+        }
+
+        // Оператор вибору Switch Case
+        // Оператор вибору працює з типами даних byte, short, char, int.
+        // Також працює з переліками Enum, 
+        // класом String та класами-обгортками примітивних типів:
+        // Character, Byte, Short та Integer.
+        int month = 3;
+        String monthString;
+        switch (month) {
+            case 1: monthString = "Січень";
+                    break;
+            case 2: monthString = "Лютий";
+                    break;
+            case 3: monthString = "Березень";
+                    break;
+            default: monthString = "Інший місяць";
+                     break;
+        }
+        System.out.println("Результат Switch Case: " + monthString);
+        
+        // Починаючи з Java 7 і далі, вибір рядкових змінних здійснюється так:
+        String myAnswer = "можливо";
+        switch(myAnswer) {
+            case "так":
+                System.out.println("Ви відповіли «Так».");
+                break;
+            case "ні":
+                System.out.println("Ви відповіли «ні».");
+                break;
+            case "можливо":
+                System.out.println("Ви відповіли «Можливо».");
+                break;
+            default:
+                System.out.println("Ви відповіли «" + myAnswer + "»");
+                break;
+        }
+
+        // Тернарний оператор вибору
+        // Можна використовувати оператор «?» (знак питання) для визначення умови.
+        // Читається так: «Якщо (умова) вірна, то <перше значення>, інакше
+        // <друге значення>»
+        int foo = 5;
+        String bar = (foo < 10) ? "A" : "B";
+        System.out.println(bar); // Надрукується А, бо умова вірна
+
+
+        ////////////////////////////////////////
+        // Перетворення типів
+        ////////////////////////////////////////
+
+        // Перетворення String на Integer
+        Integer.parseInt("123");//поверне числову версію рядка "123"
+
+        // Перетворення Integer на String
+        Integer.toString(123);//повертає рядкову версію 123
+
+        // Для інших перетворень є наступні класи:
+        // Double
+        // Long
+        // String
+
+        // Приведення типів
+        // Тут можна прочитати про приведення об’єктів (англ.):
+        // http://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html
+
+
+        ///////////////////////////////////////
+        // Класи та функції
+        ///////////////////////////////////////
+
+        System.out.println("\n->Класи та функції");
+
+        // (Клас Bicycle наведений нижче)
+
+        // Новий об’єкт класу
+        Bicycle trek = new Bicycle();
+
+        // Виклик методу об’єкта
+        trek.speedUp(3); // Постійно використовуються методи з назвами set і get
+        trek.setCadence(100);
+
+        // toString повертає рядкове представлення об’єкту.
+        System.out.println("Інформація про об’єкт trek: " + trek.toString());
+        
+        // У Java немає синтаксису для явного створення статичних колекцій.
+        // Це можна зробити так:
+
+        private static final Set<String> COUNTRIES = new HashSet<String>();
+        static {
+           validCodes.add("DENMARK");
+           validCodes.add("SWEDEN");
+           validCodes.add("FINLAND");
+        }
+
+        // Але є інший спосіб — ініціалізація з подвійними фігурними дужками.
+
+        private static final Set<String> COUNTRIES = new HashSet<String>() {{
+            add("DENMARK");
+            add("SWEDEN");
+            add("FINLAND");
+        }}
+
+        // Використовується анонімний внутрішній клас
+
+    } // Кінець методу main
+} // Кінець класу LearnJava
+
+
+// У .java-файл можна додавати інші, не public класи зовнішнього рівня,
+// але це не є хорошою практикою. Розміщуйте класи в окремих файлах.
+
+
+// Синтаксис оголошення класу:
+// <public/private/protected> class <ім’я класу> {
+//    // поля, конструктори, функції та ін.
+//    // у Java функції називаються методами.
+// }
+
+class Bicycle {
+
+    // Поля (змінні) класу Bicycle
+    public int cadence; // Public: доступно звідусіль
+    private int speed;  // Private: доступно лише у межах класу
+    protected int gear; // Protected: доступно лише класові та його нащадкам
+    String name; // за замовчанням: доступно у даному пакеті
+
+    static String className; // статична змінна класу
+
+    // статичний блок
+    // Java не має статичних конструкторів, але
+    // має статичний блок ініціалізації змінних класу    
+    // Цей блок виконується при завантаженні класу.
+    static {
+        className = "Bicycle";
+    }
+
+    // Конструктори є способом створення класу
+    // Оце — конструктор
+    public Bicycle() {
+        // Можна викликати інший конструктор:
+        // this(1, 50, 5, "Bontrager");
+        gear = 1;
+        cadence = 50;
+        speed = 5;
+        name = "Bontrager";
+    }
+
+    // Цей конструктор приймає аргументи
+    public Bicycle(int startCadence, int startSpeed, int startGear,
+        String name) {
+        this.gear = startGear;
+        this.cadence = startCadence;
+        this.speed = startSpeed;
+        this.name = name;
+    }
+
+    // Синтаксис методу:
+    // <public/private/protected> <тип повернутого значення> <ім’я методу>(<аргументи>)
+
+    // Java-класи часто мають методи для отримання та встановлення змінних
+
+    // Синтаксис оголошення методу:
+    // <модифікатор доступу> <тип повернутого значення> <ім’я методу>(<аргументи>)
+    public int getCadence() {
+        return cadence;
+    }
+
+    // void-методи не повертають значень
+    public void setCadence(int newValue) {
+        cadence = newValue;
+    }
+
+    public void setGear(int newValue) {
+        gear = newValue;
+    }
+
+    public void speedUp(int increment) {
+        speed += increment;
+    }
+
+    public void slowDown(int decrement) {
+        speed -= decrement;
+    }
+
+    public void setName(String newName) {
+        name = newName;
+    }
+
+    public String getName() {
+        return name;
+    }
+
+    //Метод показує значення змінних об’єкту.
+    @Override // Успадковано від класу Object.
+    public String toString() {
+        return "gear: " + gear + " cadence: " + cadence + " speed: " + speed +
+            " name: " + name;
+    }
+} // кінець класу Bicycle
+
+// PennyFarthing є розширенням (нащадком) класу Bicycle
+class PennyFarthing extends Bicycle {
+    // (Penny Farthings мають велике переднє колесо.
+    // Вони не мають передач.)
+
+    public PennyFarthing(int startCadence, int startSpeed){
+        // Виклик батьківського конструктора через super
+        super(startCadence, startSpeed, 0, "PennyFarthing");
+    }
+
+    // Перевизначений метод має бути відмічений аннотацією, яка починається зі знака @.
+    // Для ознайомлення з аннотаціями перейдіть за посиланням
+    // http://docs.oracle.com/javase/tutorial/java/annotations/
+    @Override
+    public void setGear(int gear) {
+        gear = 0;
+    }
+}
+
+// Інтерфейси
+// Синтаксис оголошення інтерфейсів
+// <рівень доступу> interface <ім’я інтерфейсу> extends <батьківський інтерфейс> {
+//     // Константи
+//     // Оголошення методів
+// }
+
+//Приклад — їжа (Food):
+public interface Edible {
+    public void eat(); // Будь-які класи, що реалізують цей інтерфейс,
+                       // повинні реалізувати цей метод.
+}
+
+public interface Digestible {
+    public void digest();
+}
+
+
+// Можна створити клас, що реалізує обидва інтерфейси.
+public class Fruit implements Edible, Digestible {
+  
+    @Override
+    public void eat() {
+        // ...
+    }
+
+    @Override
+    public void digest() {
+        // ...
+    }
+}
+
+// В Java можна успадковувати лише один клас, але реалізовувати багато
+// інтерфейсів. Наприклад:
+public class ExampleClass extends ExampleClassParent implements InterfaceOne,
+    InterfaceTwo {
+
+    @Override
+    public void InterfaceOneMethod() {
+    }
+
+    @Override
+    public void InterfaceTwoMethod() {
+    }
+
+}
+
+// Абстрактні класи
+
+// Синтаксис оголошення абстрактних класів:
+// <рівень доступу> abstract <ім’я класу> extends <батьківський абстрактний клас> {
+//     // Константи і змінні
+//     // Оголошення методів
+// }
+
+// Позначення класу як абстрактного означає, що оголошені у ньому методи мають
+// бути реалізовані у дочірніх класах. Подібно до інтерфейсів, не можна створити екземпляри
+// абстракних класів, але їх можна успадковувати. Нащадок зобов’язаний реалізувати всі абстрактні
+// методи. на відміну від інтерфейсів, абстрактні класи можуть мати як визначені,
+// так і абстрактні методи. Методи в інтерфейсах не мають тіла,
+// за винятком статичних методів, а змінні неявно мають модифікатор final, на відміну від
+// абстрактного класу. Абстрактні класи МОЖУТЬ мати метод «main».
+
+public abstract class Animal
+{
+    public abstract void makeSound();
+
+    // Метод може мати тіло
+    public void eat()
+    {
+        System.out.println("Я тварина, і я їм.");  
+        // Зауваження: є доступ до приватних змінних.
+        age = 30;
+    }
+
+    // Ініціалізація не потрібна
+    protected int age;
+
+    public void printAge()
+    {
+        System.out.println(age);  
+    }
+
+    // Абстрактні класи МОЖУТЬ мати метод «main».
+    public static void main(String[] args)
+    {
+        System.out.println("Я абстрактний");
+    }
+}
+
+class Dog extends Animal
+{
+    // Слід помічати перевизначення абстрактних методів
+    @Override
+    public void makeSound()
+    {
+        System.out.println("Гав!");
+        // age = 30;	==> ПОМИЛКА! age є private для Animal
+    }
+
+    // Зауваження: Буде помилка, якщо використати аннотацію
+    // @Override тут, так як у java не можна
+    // перевизначати статичні методи.
+    // Те, що тут відбувається, називається приховування методів.
+    // Більш детально: http://stackoverflow.com/questions/16313649/
+    public static void main(String[] args)
+    {
+        Dog pluto = new Dog();
+        pluto.makeSound();
+        pluto.eat();
+        pluto.printAge();
+    }
+}
+
+// Фінальні класи
+
+// Синтаксис оголошення фінальних класів
+// <рівень доступу> final <ім’я класу> {
+//     // Константи і змінні
+//     // Оголошення методів
+// }
+
+// Фінальні класи не можуть мати нащадків, також самі вони є останніми нащадками.
+// Фінальні класи є протилежністю абстрактних у цьому плані.
+
+public final class SaberToothedCat extends Animal
+{
+    // Перевизначення методу
+    @Override
+    public void makeSound()
+    {
+        System.out.println("Гррр!");
+    }
+}
+
+// Фінальні методи
+public abstract class Mammal()
+{
+    // Синтаксис фінальних методів:
+    // <модифікатор доступу> final <тип повернутого значення> <ім’я функції>(<аргументи>)
+
+    // Фінальні методи не можуть бути перевизначені класом-нащадком,
+    // вони є остаточною реалізацією методу.
+    public final boolean isWarmBlooded()
+    {
+        return true;
+    }
+}
+
+
+// Тип Enum (перелік)
+//
+// Enum є спеціальним типом даних, який дозволяє змінним бути певною множиною
+// визначених констант. Змінна має відповідати одному зі значень, що
+// заздалегідь визначені для неї. Оскільки це константи, імена типів полів у enum
+// задаються у верхньому регістрі. Тип «перелік» у Java задається за допомогою
+// ключового слова enum. Наприклад, перелік днів тижня можна задати так:
+
+public enum Day {
+    SUNDAY, MONDAY, TUESDAY, WEDNESDAY,
+    THURSDAY, FRIDAY, SATURDAY 
+}
+
+// Перелік Day можна використовувати так:
+
+public class EnumTest {
+    
+    // Змінна того же типу, що й перелік
+    Day day;
+    
+    public EnumTest(Day day) {
+        this.day = day;
+    }
+    
+    public void tellItLikeItIs() {
+        switch (day) {
+            case MONDAY:
+                System.out.println("Понеділкі важкі.");
+                break;
+                    
+            case FRIDAY:
+                System.out.println("П’ятниці краще.");
+                break;
+                         
+            case SATURDAY: 
+            case SUNDAY:
+                System.out.println("Вихідні найліпші.");
+                break;
+                        
+            default:
+                System.out.println("Середина тижня так собі.");
+                break;
+        }
+    }
+    
+    public static void main(String[] args) {
+        EnumTest firstDay = new EnumTest(Day.MONDAY);
+        firstDay.tellItLikeItIs(); // => Понеділки важкі.
+        EnumTest thirdDay = new EnumTest(Day.WEDNESDAY);
+        thirdDay.tellItLikeItIs(); // => Середина тижня так собі.
+    }
+}
+
+// Переліки набагато потужніші, ніж тут показано. 
+// Тіло переліків може містити методи та інші змінні.
+// Дивіться більше тут: https://docs.oracle.com/javase/tutorial/java/javaOO/enum.html
+
+```
+
+## Додатково для читання
+
+Посилання, наведені нижче, дозволяють тільки зрозуміти тему. Щоб знайти конкретні приклади, використовуйте Ґуґл.
+
+**Офіційні посібники Oracle**:
+
+* [Посібник Java від Sun / Oracle](http://docs.oracle.com/javase/tutorial/index.html)
+
+* [Java — модифікатори доступу](http://docs.oracle.com/javase/tutorial/java/javaOO/accesscontrol.html)
+
+* [ООП-концепції](http://docs.oracle.com/javase/tutorial/java/concepts/index.html):
+    * [Наслідування](http://docs.oracle.com/javase/tutorial/java/IandI/subclasses.html)
+    * [Поліморфізм](http://docs.oracle.com/javase/tutorial/java/IandI/polymorphism.html)
+    * [Абстракція](http://docs.oracle.com/javase/tutorial/java/IandI/abstract.html)
+
+* [Виключення](http://docs.oracle.com/javase/tutorial/essential/exceptions/index.html)
+
+* [Інтерфейси](http://docs.oracle.com/javase/tutorial/java/IandI/createinterface.html)
+
+* [параметризація](http://docs.oracle.com/javase/tutorial/java/generics/index.html)
+
+* [Стиль коду у Java](http://www.oracle.com/technetwork/java/codeconvtoc-136057.html)
+
+**Online-практика та посібники**
+
+* [Learneroo.com — Вивчаємо Java](http://www.learneroo.com)
+
+* [Codingbat.com](http://codingbat.com/java)
+
+
+**Книжки**:
+
+* [Head First Java](http://www.headfirstlabs.com/books/hfjava/)
+
+* [Thinking in Java](http://www.mindview.net/Books/TIJ/)
+
+* [Objects First with Java](http://www.amazon.com/Objects-First-Java-Practical-Introduction/dp/0132492660)
+
+* [Java The Complete Reference](http://www.amazon.com/gp/product/0071606300)
diff --git a/vi-vn/ruby-ecosystem-vi.html.markdown b/vi-vn/ruby-ecosystem-vi.html.markdown
new file mode 100644
index 00000000..518cf072
--- /dev/null
+++ b/vi-vn/ruby-ecosystem-vi.html.markdown
@@ -0,0 +1,148 @@
+---
+category: tool
+tool: ruby ecosystem
+contributors:
+    - ["Jon Smock", "http://github.com/jonsmock"]
+    - ["Rafal Chmiel", "http://github.com/rafalchmiel"]
+    - ["Vinh Nguyen", "http://rubydaily.net"]
+lang: vi-vn
+---
+
+Nhìn chung các lập trình viên Ruby luôn có cách để cài đặt các phiên bản
+Ruby khác nhau, quản lý các gói (hoặc gems), và quản lý các thư viện.
+
+## Trình quản lý Ruby
+
+Một vài nền tảng phải có Ruby đã được cài đặt trước hoặc có sẵn như một gói.
+Số đông lập trình viên Ruby không sử dụng cái này, hoặc nếu có, họ chỉ sử
+dụng chúng để bootstrap cài đặt Ruby. Thay vào đó, các lập trình viên Ruby
+có xu hướng cài đặt trình quản lý Ruby để cài đặt và chuyển đổi các phiên
+bản của Ruby và môi trường Ruby cho dự án của họ.
+
+Dưới đây là các trình quản lý môi trường Ruby nổi tiếng:
+
+* [RVM](https://rvm.io/) - Cài đặt và chuyển đổi các phiên bản Ruby. RVM cũng
+  có các khái niệm về tập các gems để quản lý môi trường dự án một
+  cách tốt nhất.
+* [ruby-build](https://github.com/sstephenson/ruby-build) - Chỉ cài đặt các
+  phiên bản Ruby. Sử dụng cái này giúp cho việc cài đặt Ruby tốt hơn.
+* [rbenv](https://github.com/sstephenson/rbenv) - Chỉ dùng để chuyển đổi các
+  phiên bản Ruby. Được sử dụng đi kèm với ruby-build. Tiện ích này sẽ giúp
+  cho việc dùng Ruby tốt hơn.
+* [chruby](https://github.com/postmodern/chruby) - Chỉ dùng để chuyển đổi các
+  phiên bản Ruby. Tương tự như rbenv. Không quan tâm làm thế nào Ruby được
+  cài đặt.
+
+## Các phiên bản Ruby
+
+Ruby được tạo ra bởi Yukihiro "Matz" Matsumoto, người được xem như là một
+[BDFL](https://en.wikipedia.org/wiki/Benevolent_Dictator_for_Life), mặc dầu gần
+đây luôn thay đổi. Kết quả là, tham chiếu của Ruby được gọi là MRI(Matz'
+Reference Implementation), và khi bạn biết về một phiên bản Ruby, nó đang
+được tham chiếu để phát hành một phiên bản của MRI.
+
+Có ba phiên bản Ruby chính thức được dùng là:
+
+* 2.0.0 - Được phát hành vào tháng 2 năm 2013. Hầu hết các thư viện lớn, và
+nền tảng đều hỗ trợ 2.0.0.
+* 1.9.3 - Được phát hành vào tháng 10 năm 2011. Đây là phiên bản hầu hết các
+lập trình viên Ruby đang dùng. [Nhưng đã không còn hỗ trợ](
+  https://www.ruby-lang.org/en/news/2015/02/23/support-for-ruby-1-9-3-has-ended
+  /)
+* 1.8.7 - [Ruby 1.8.7 đã không còn được sử dụng](
+  http://www.ruby-lang.org/en/news/2013/06/30/we-retire-1-8-7/).
+
+Sự thay đổi giữa phiên bản 1.8.7 đến 1.9.x lớn hơn nhiều so với thay đổi từ
+1.9.3 đến 2.0.0. Ví dụ, các phiên bản 1.9 giới thiệu các bảng mã và một
+byecote VM. Có các dự án vẫn đang ở 1.8.7, nhưng chúng chiếm một số lượng ít
+, phần lớn cộng đồng đã chuyển sang ít nhất là 1.9.2 hoặc 1.9.3
+
+## Các ứng dụng Ruby
+
+Hệ sinh thái Ruby có rất nhiều ứng dụng, với mỗi thế mạnh độc đáo và khả
+năng tương thích. Để rõ ràng hơn, sự khác nhau giữa các ứng dụng được viết
+bằng các ngôn ngữ khác nhau, nhưng *chúng vẫn là Ruby*.
+Mỗi ứng dụng có các hook đặc trưng và những tính năng đặc biệt, nhưng tất cả
+đều chạy Ruby rất tốt. Ví dụ, JRuby được viết bằng Java, nhưng bạn không
+cần biết Java để sử dụng.
+
+Một số ứng dụng nổi tiếng/tương thích cao:
+
+* [MRI](https://github.com/ruby/ruby) - Được viết bằng C, đây là ứng dụng
+  tham chiếu của Ruby. Nó tương thích 100%. Tất cả các phiên bản Ruby có khả
+  năng duy trì với MRI(xem [RubySpec](#rubyspec) bên dưới).
+* [JRuby](http://jruby.org/) - Được viết bằng Java và Ruby, ứng dụng này khá
+  nhanh. Điểm mạnh quan trọng nhất của JRuby là JVM/Java interop, tận dụng
+  các công cụ, dự án và ngôn ngữ hiện có của JVM.
+* [Rubinius](http://rubini.us/) - Được viết bằng ngôn ngữ chính là Ruby với
+  một C++ bytecode VM. Rất nhanh. Bởi vì nó được phát triển bằng chính Ruby.
+
+Một số ứng dụng khá nổi tiếng/tương thích:
+
+* [Maglev](http://maglev.github.io/) - Đứng đầu Gemstone, một Smalltalk VM.
+  SmallTalk có một vài tiện ích hấp dẫn, và trong dự án này đã mang nó vào
+  môi trường Ruby.
+* [RubyMotion](http://www.rubymotion.com/) - Mang Ruby đến việc phát triển iOS.
+
+Một số ứng dụng tốt/tương thích:
+
+* [Topaz](http://topazruby.com/) - Được biết bằng RPython (sử dụng Pypy),
+  Topaz vẫn còn rất trẻ và chưa hoàn toàn tương thích. Nó hứa hẹn khả năng
+  trở thành một ứng dụng Ruby tương thích cao.
+* [IronRuby](http://ironruby.net/) - Được viết bằng C# hướng đến nền tảng .NET
+  , IronRuby dường như đã dừng hoạt động kể từ khi Microsoft rút hỗ trợ.
+
+Các ứng dụng Ruby có các phiên bản riêng của mình, nhưng chúng luôn luôn
+hướng đến sự một phiên bản đặc biệt của MRI cho sự tương thích. Nhiều ứng
+dụng có khả năng đến các chế độ khác nhau (ví dụ, 1.8 hoặc 1.9) để hướng đến
+phiên bản MRI.
+
+## RubySpec
+
+Hầu hết các ứng dụng Ruby dựa vào [RubySpec](http://rubyspec.org/). Ruby không
+có thông báo chính thức, nhưng cộng đồng đã viết những specs thực thi trong
+Ruby để kiểm tra sự tương thích với MRI.
+
+## RubyGems
+
+[RubyGems](http://rubygems.org/) là một cộng đồng quản lý các gói cho Ruby.
+RubyGems đi kèm với Ruby, bởi vậy không cần cài đặt riêng lẻ.
+
+Các gói Ruby được gọi là "gems", và chúng được host bởi cộng đồng tại
+RubyGems.org. Một gem chứa mã nguồn của nó và một vài mô tả, bao gồm những
+thứ như phiên bản, các thư viện độc lập, các tác giả và các loại giấy phép.
+
+## Bundler
+
+[Bundler](http://bundler.io/) là một gem giải quyết độc lập. Nó sử dụng một
+Gemfile để tìm kiếm các thư viện độc lập trong dự án, và sau đó sẽ lấy về
+các thư viện của các thư viện độc lập này. Nó thực hiện cho đến khi việc
+tải các thư viện hoàn tất, hoặc nó sẽ dừng nếu xuất hiện bất kỳ xung đột nào.
+
+Bundler sẽ hiển thị lỗi nếu tìm thấy bất kỳ xung đột giữa các thư viện. Ví
+dụ, nếu như gem A yêu cầu gem Z có phiên bản 3 hoặc cao hơn, nhưng gem B lại
+yêu cầu gem Z phiên bản 2. Bundler sẽ thông báo cho bạn sự xung đột này.
+Điều này đã rất hữu ích khi nhiều gem tham chiếu các các gem khác (trong
+gem này lại tham chiếu đến các gem khác nữa), có thể hình thành một đồ thị
+lớn để nói.
+
+# Kiểm thử
+
+Kiểm thử là một phần lớn của Ruby. Ruby mang đến một nền tảng kiểm thử theo
+kiểu Unit được gọi là minitest (hoặc TestUnit for phiên bản Ruby 1.8.x).
+Có nhiều thư viện kiểm thử với các mục đích khác nhau.
+
+* [TestUnit](http://ruby-doc.org/stdlib-1.8.7/libdoc/test/unit/rdoc/Test/
+  Unit.html) - Nền tảng kiểm thử theo kiểu Unit của Ruby 1.8.
+* [minitest](http://ruby-doc.org/stdlib-2.0.0/libdoc/minitest
+  /rdoc/MiniTest.html) -Nền tảng kiểm thử được xây dựng cho Ruby 1.9/2.0
+* [RSpec](http://rspec.info/) - Một nền tảng kiểm thử tập trung vào sự
+  hoạt động.
+* [Cucumber](http://cukes.info/) - Một nền tảng kiểm thử theo kiểu BDD dưới
+  định dạng Gherkin.
+
+## Be Nice
+
+Cộng đồng Ruby tự hào là một cộng đồng mở, đa dạng và chào đón tất cả mọi
+người. Bản thân Matz là một người cực kỳ thân thiện, và các lập trình viên
+Ruby rất tuyệt vời.
diff --git a/zfs.html.markdown b/zfs.html.markdown
index 39ff84cd..3fe05896 100644
--- a/zfs.html.markdown
+++ b/zfs.html.markdown
@@ -393,7 +393,7 @@ echo "RESET SLAVE;" | /usr/local/bin/mysql -u root -pmyrootpassword -h staging
 ### Additional Reading
 
 * [BSDNow's Crash Course on ZFS](http://www.bsdnow.tv/tutorials/zfs)
-* [FreeBSD Handbook on ZFS](https://wiki.freebsd.org/ZF://wiki.freebsd.org/ZFS)
+* [FreeBSD Handbook on ZFS](https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/zfs.html)
 * [BSDNow's Crash Course on ZFS](http://www.bsdnow.tv/tutorials/zfs)
 * [Oracle's Tuning Guide](http://www.oracle.com/technetwork/articles/servers-storage-admin/sto-recommended-zfs-settings-1951715.html)
 * [OpenZFS Tuning Guide](http://open-zfs.org/wiki/Performance_tuning)
diff --git a/zh-cn/markdown-cn.html.markdown b/zh-cn/markdown-cn.html.markdown
index b633714d..87ed46ad 100644
--- a/zh-cn/markdown-cn.html.markdown
+++ b/zh-cn/markdown-cn.html.markdown
@@ -53,7 +53,7 @@ __此文本也是__
 **_或者这样。_**
 *__这个也是！__*
 
-<!-- 在 Github 采用的 Markdown 中 -->
+<!-- 在 GitHub 采用的 Markdown 中 -->
 
 ~~此文本为删除线效果。~~
 
@@ -142,7 +142,7 @@ __此文本也是__
 
 John 甚至不知道 `go_to()` 方程是干嘛的!
 
-<!-- 在Github的 Markdown中，对于代码你可以使用特殊的语法 -->
+<!-- 在GitHub的 Markdown中，对于代码你可以使用特殊的语法 -->
 
 \`\`\`ruby <!-- 插入时记得移除反斜线， 仅留```ruby ！ -->
 def foobar
@@ -150,7 +150,7 @@ def foobar
 end
 \`\`\` <!-- 这里也是，移除反斜线，仅留 ``` -->
 
-<!-- 以上代码不需要缩进，而且 Github 会根据```后表明的语言来进行语法高亮 -->
+<!-- 以上代码不需要缩进，而且 GitHub 会根据```后表明的语言来进行语法高亮 -->
 
 <!-- 水平线 （<hr />） -->
 <!-- 水平线可由三个或以上的星号或者减号创建，可带可不带空格。 -->
@@ -220,7 +220,7 @@ end
 斜体化, 所以我就: \*这段置文字于星号之间\*。
 
 <!-- 表格 -->
-<!-- 表格只被 Github 的 Markdown 支持，并且有一点笨重，但如果你真的要用的话: -->
+<!-- 表格只被 GitHub 的 Markdown 支持，并且有一点笨重，但如果你真的要用的话: -->
 
 | 第一列        | 第二列    | 第三列       |
 | :----------   | :------:  | ----------:  |
diff --git a/zh-cn/swift-cn.html.markdown b/zh-cn/swift-cn.html.markdown
index 3efe4941..017a7812 100644
--- a/zh-cn/swift-cn.html.markdown
+++ b/zh-cn/swift-cn.html.markdown
@@ -31,7 +31,7 @@ import UIKit
 
 // Swift2.0 println() 及 print() 已经整合成 print()。
 print("Hello, world") // 这是原本的 println()，会自动进入下一行
-print("Hello, world", appendNewLine: false) // 如果不要自动进入下一行，需设定进入下一行为 false
+print("Hello, world", terminator: "") // 如果不要自动进入下一行，需设定结束符为空串
 
 // 变量 (var) 的值设置后可以随意改变
 // 常量 (let) 的值设置后不能改变
@@ -171,8 +171,8 @@ while i < 1000 {
     i *= 2
 }
 
-// do-while 循环
-do {
+// repeat-while 循环
+repeat {
     print("hello")
 } while 1 == 2
 
@@ -212,11 +212,11 @@ default: // 在 Swift 里，switch 语句的 case 必须处理所有可能的情
 func greet(name: String, day: String) -> String {
     return "Hello \(name), today is \(day)."
 }
-greet("Bob", "Tuesday")
+greet("Bob", day: "Tuesday")
 
-// 函数参数前带 `#` 表示外部参数名和内部参数名使用同一个名称。
+// 第一个参数表示外部参数名和内部参数名使用同一个名称。
 // 第二个参数表示外部参数名使用 `externalParamName` ，内部参数名使用 `localParamName`
-func greet2(#requiredName: String, externalParamName localParamName: String) -> String {
+func greet2(requiredName requiredName: String, externalParamName localParamName: String) -> String {
     return "Hello \(requiredName), the day is \(localParamName)"
 }
 greet2(requiredName:"John", externalParamName: "Sunday")    // 调用时，使用命名参数来指定参数的值
@@ -235,8 +235,8 @@ print("Gas price: \(price)")
 // 可变参数
 func setup(numbers: Int...) {
     // 可变参数是个数组
-    let number = numbers[0]
-    let argCount = numbers.count
+    let _ = numbers[0]
+    let _ = numbers.count
 }
 
 // 函数变量以及函数作为返回值返回
@@ -257,7 +257,7 @@ func swapTwoInts(inout a: Int, inout b: Int) {
 }
 var someIntA = 7
 var someIntB = 3
-swapTwoInts(&someIntA, &someIntB)
+swapTwoInts(&someIntA, b: &someIntB)
 print(someIntB) // 7
 
 
@@ -286,17 +286,10 @@ numbers = numbers.map({ number in 3 * number })
 print(numbers) // [3, 6, 18]
 
 // 简洁的闭包
-numbers = sorted(numbers) { $0 > $1 }
-// 函数的最后一个参数可以放在括号之外，上面的语句是这个语句的简写形式
-// numbers = sorted(numbers, { $0 > $1 })
+numbers = numbers.sort { $0 > $1 }
 
 print(numbers) // [18, 6, 3]
 
-// 超级简洁的闭包，因为 `<` 是个操作符函数
-numbers = sorted(numbers, < )
-
-print(numbers) // [3, 6, 18]
-
 
 //
 // MARK: 结构体
@@ -305,7 +298,7 @@ print(numbers) // [3, 6, 18]
 // 结构体和类非常类似，可以有属性和方法
 
 struct NamesTable {
-    let names = [String]()
+    let names: [String]
 
     // 自定义下标运算符
     subscript(index: Int) -> String {
@@ -516,7 +509,7 @@ protocol ShapeGenerator {
 // 一个类实现一个带 optional 方法的协议时，可以实现或不实现这个方法
 // optional 方法可以使用 optional 规则来调用
 @objc protocol TransformShape {
-    optional func reshaped()
+    optional func reshape()
     optional func canReshape() -> Bool
 }
 
@@ -528,9 +521,9 @@ class MyShape: Rect {
 
         // 在 optional 属性，方法或下标运算符后面加一个问号，可以优雅地忽略 nil 值，返回 nil。
         // 这样就不会引起运行时错误 (runtime error)
-        if let allow = self.delegate?.canReshape?() {
+        if let reshape = self.delegate?.canReshape?() where reshape {
             // 注意语句中的问号
-            self.delegate?.reshaped?()
+            self.delegate?.reshape?()
         }
     }
 }
@@ -542,8 +535,8 @@ class MyShape: Rect {
 
 // 扩展: 给一个已经存在的数据类型添加功能
 
-// 给 Square 类添加 `Printable` 协议的实现，现在其支持 `Printable` 协议
-extension Square: Printable {
+// 给 Square 类添加 `CustomStringConvertible` 协议的实现，现在其支持 `CustomStringConvertible` 协议
+extension Square: CustomStringConvertible {
     var description: String {
         return "Area: \(self.getArea()) - ID: \(self.identifier)"
     }
@@ -567,8 +560,8 @@ print(14.multiplyBy(3)) // 42
 
 // 泛型: 和 Java 及 C# 的泛型类似，使用 `where` 关键字来限制类型。
 // 如果只有一个类型限制，可以省略 `where` 关键字
-func findIndex<T: Equatable>(array: [T], valueToFind: T) -> Int? {
-    for (index, value) in enumerate(array) {
+func findIndex<T: Equatable>(array: [T], _ valueToFind: T) -> Int? {
+    for (index, value) in array.enumerate() {
         if value == valueToFind {
             return index
         }