diff options
Diffstat (limited to 'vimscript.html.markdown')
| -rw-r--r-- | vimscript.html.markdown | 429 |
1 files changed, 204 insertions, 225 deletions
diff --git a/vimscript.html.markdown b/vimscript.html.markdown index 5235a149..da26e37b 100644 --- a/vimscript.html.markdown +++ b/vimscript.html.markdown @@ -1,31 +1,35 @@ --- language: Vimscript -filename: learnvimscript.md +filename: learnvimscript.vim contributors: - ["HiPhish", "http://hiphish.github.io/"] --- -## Introduction - -Vim script (also called VimL) is the subset of Vim's ex-commands which supplies -a number of features one one would expect from a scripting language, such as -values, variables, functions or loops. Always keep in the back of your mind -that a Vim script file is just a sequence of ex-commands. It is very common for -a script to mix programming-language features and raw ex-commands. - -You can run Vim script directly by entering the commands in command-mode (press -`:` to enter command-mode), or you can write them to a file (without the -leading `:`) and source it in a running Vim instance (`:source path/to/file`). -Some files are sourced automatically as part of your configuration (see `:h -startup`). This guide assumes that you are familiar with ex-commands and will -only cover the scripting. Help topics to the relevant manual sections are -included. - -See `:h usr_41.txt` for the official introduction to Vim script. A comment is -anything following an unmatched `"` until the end of the line, and `|` -separates instructions (what `;` does in most other languages). - ```vim +" ############## +" Introduction +" ############## +" +" Vim script (also called VimL) is the subset of Vim's ex-commands which +" supplies a number of features one one would expect from a scripting language, +" such as values, variables, functions or loops. Always keep in the back of +" your mind that a Vim script file is just a sequence of ex-commands. It is +" very common for a script to mix programming-language features and raw +" ex-commands. +" +" You can run Vim script directly by entering the commands in command-mode +" (press `:` to enter command-mode), or you can write them to a file (without +" the leading `:`) and source it in a running Vim instance (`:source +" path/to/file`). Some files are sourced automatically as part of your +" configuration (see |startup|). This guide assumes that you are familiar +" with ex-commands and will only cover the scripting. Help topics to the +" relevant manual sections are included. +" +" See |usr_41.txt| for the official introduction to Vim script. A comment is +" anything following an unmatched `"` until the end of the line, and `|` +" separates instructions (what `;` does in most other languages). References to +" the manual as surrounded with `|`, such as |help.txt|. + " This is a comment " The vertical line '|' (pipe) separates commands @@ -51,30 +55,28 @@ echo { \ 'a': 1, \ 'b': 2 \} -``` -## Types +" ####### +" Types +" ####### +" +" For an overview of types see |E712|. For an overview of operators see +" |expression-syntax| -For an overview of types see `:h E712`. For an overview of operators see -`:h expression-syntax` +" Numbers (|expr-number|) +" ####### -### Numbers -See `:h expr-number` - -```vim echo 123 |" Decimal echo 0b1111011 |" Binary echo 0173 |" Octal echo 0x7B |" Hexadecimal echo 123.0 |" Floating-point echo 1.23e2 |" Floating-point (scientific notation) -``` -Note that an *integer* number with a leading `0` is in octal notation. The -usual arithmetic operations are supported. +" Note that an *integer* number with a leading `0` is in octal notation. The +" usual arithmetic operations are supported. -```vim echo 1 + 2 |" Addition echo 1 - 2 |" Subtraction echo - 1 |" Negation (unary minus) @@ -82,22 +84,19 @@ echo + 1 |" Unary plus (does nothing really, but still legal) echo 1 * 2 |" Multiplication echo 1 / 2 |" Division echo 1 % 2 |" Modulo (remainder) -``` -### Booleans -See `:h Boolean` +" Booleans (|Boolean|) +" ######## +" +" The number 0 is false, every other number is true. Strings are implicitly +" converted to numbers (see below). There are two pre-defined semantic +" constants. -The number 0 is false, every other number is true. Strings are implicitly -converted to numbers (see below). There are two pre-defined semantic constants. - -```vim echo v:true |" Evaluates to 1 or the string 'v:true' echo v:false |" Evaluates to 0 or the string 'v:false' -``` -Boolean values can result from comparison of two objects. +" Boolean values can result from comparison of two objects. -```vim echo x == y |" Equality by value echo x != y |" Unequality echo x > y |" Greater than @@ -109,7 +108,7 @@ echo x isnot y |" Instance non-identity (lists and dictionaries) " Strings are compared based on their alphanumerical ordering " echo 'a' < 'b'. Case sensitivity depends on the setting of 'ignorecase' - +" " Explicit case-sensitivity is specified by appending '#' (match case) or '?' " (ignore case) to the operator. Prefer explicity case sensitivity when writing " portable scripts. @@ -125,36 +124,30 @@ echo "hi" =~? "hello" |" Regular expression match, case insensitive echo "hi" !~ "hello" |" Regular expression unmatch, use 'ignorecase' echo "hi" !~# "hello" |" Regular expression unmatch, case sensitive echo "hi" !~? "hello" |" Regular expression unmatch, case insensitive -``` -Boolean operations are possible. +" Boolean operations are possible. -```vim echo v:true && v:false |" Logical AND echo v:true || v:false |" Logical OR echo ! v:true |" Logical NOT echo v:true ? 'yes' : 'no' |" Ternary operator -``` - -### Strings -See `:h String` -An ordered zero-indexed sequence of bytes. The encoding of text into bytes -depends on the option `:h 'encoding'`. +" Strings (|String|) +" ####### +" +" An ordered zero-indexed sequence of bytes. The encoding of text into bytes +" depends on the option |'encoding'|. -```vim " Literal constructors echo "Hello world\n" |" The last two characters stand for newline echo 'Hello world\n' |" The last two characters are literal echo 'Let''s go!' |" Two single quotes become one quote character -``` -Single-quote strings take all characters are literal, except two single quotes, -which are taken to be a single quote in the string itself. See `:h expr-quote` -for all possible escape sequences. +" Single-quote strings take all characters are literal, except two single +" quotes, which are taken to be a single quote in the string itself. See +" |expr-quote| for all possible escape sequences. -``` " String concatenation " The .. operator is preferred, but only supported in since Vim 8.1.1114 echo 'Hello ' . 'world' |" String concatenation @@ -172,17 +165,16 @@ echo 'Hello'[1:-2] |" Substring until second to last byte echo 'Hello'[1:] |" Substring with starting index echo 'Hello'[:2] |" Substring with ending index echo 'Hello'[-2:] |" Substring relative to end of string -``` - -A negative index is relative to the end of the string. See `:h -string-functions` for all string-related functions. -### Lists -See `:h List` +" A negative index is relative to the end of the string. See +" |string-functions| for all string-related functions. -An ordered zero-indexed heterogeneous sequence of arbitrary Vim script objects. +" Lists (|List|) +" ##### +" +" An ordered zero-indexed heterogeneous sequence of arbitrary Vim script +" objects. -```vim " Literal constructor echo [] |" Empty list echo [1, 2, 'Hello'] |" List with elements @@ -192,28 +184,27 @@ echo [[1, 2], 'Hello'] |" Lists can be nested arbitrarily " List concatenation echo [1, 2] + [3, 4] |" Creates a new list -" List indexing, negative is relative to end of list (:h list-index) +" List indexing, negative is relative to end of list (|list-index|) echo [1, 2, 3, 4][2] |" Third element echo [1, 2, 3, 4][-1] |" Last element -" List slicing (:h sublist) +" List slicing (|sublist|) echo [1, 2, 3, 4][:] |" Shallow copy of entire list echo [1, 2, 3, 4][:2] |" Sublist until third item (inclusive) echo [1, 2, 3, 4][2:] |" Sublist from third item (inclusive) echo [1, 2, 3, 4][:-2] |" Sublist until second-to-last item (inclusive) -``` -All slicing operations create new lists. To modify a list in-place use list -functions (`:h list-functions`) or assign directly to an item (see below about -variables). +" All slicing operations create new lists. To modify a list in-place use list +" functions (|list-functions|) or assign directly to an item (see below about +" variables). -### Dictionaries -See `:h Dictionary` -An unordered sequence of key-value pairs, keys are always strings (numbers are -implicitly converted to strings). +" Dictionaries (|Dictionary|) +" ############ +" +" An unordered sequence of key-value pairs, keys are always strings (numbers +" are implicitly converted to strings). -```vim " Dictionary literal echo {} |" Empty dictionary echo {'a': 1, 'b': 2} |" Dictionary literal @@ -223,61 +214,61 @@ echo {'x': {'a': 1, 'b': 2}} |" Nested dictionary " Indexing a dictionary echo {'a': 1, 'b': 2}['a'] |" Literal index echo {'a': 1, 'b': 2}.a |" Syntactic sugar for simple keys -``` -See `:h dict-functions` for dictionary manipulation functions. +" See |dict-functions| for dictionary manipulation functions. -### Funcref -See `:h Funcref` -Reference to a function, uses the function name as a string for construction. -When stored in a variable the name of the variable has the same restrictions -as a function name (see below). +" Funcref (|Funcref|) +" ####### +" +" Reference to a function, uses the function name as a string for construction. +" When stored in a variable the name of the variable has the same restrictions +" as a function name (see below). -```vim echo function('type') |" Reference to function type() +" Note that `funcref('type')` will throw an error because the argument must be +" a user-defined function; see further below for defining your own functions. echo funcref('type') |" Reference by identity, not name +" A lambda (|lambda|) is an anonymous function; it can only contain one +" expression in its body, which is also its implicit return value. echo {x -> x * x} |" Anonymous function echo function('substitute', ['hello']) |" Partial function -``` -A lambda (`:h lambda`) is an anonymous function; it can only contain one -expression in its body, which is also its implicit return value. -### Regular expression -See `:h regular-expression` +" Regular expression (|regular-expression|) +" ################## +" +" A regular expression pattern is generally a string, but in some cases you can +" also use a regular expression between a pair of delimiters (usually `/`, but +" you can choose anything). -A regular expression pattern is generally a string, but in some cases you can -also use a regular expression between a pair of delimiters (usually `/`, but -you can choose anything). - -```vim " Substitute 'hello' for 'Hello' substitute/hello/Hello/ -``` -## Implicit type conversions -Strings are converted to numbers, and numbers to strings when necessary. A -number becomes its decimal notation as a string. A string becomes its numerical -value if it can be parsed to a number, otherwise it becomes zero. +" ########################### +" Implicit type conversions +" ########################### +" +" Strings are converted to numbers, and numbers to strings when necessary. A +" number becomes its decimal notation as a string. A string becomes its +" numerical value if it can be parsed to a number, otherwise it becomes zero. -```vim echo "1" + 1 |" Number echo "1" .. 1 |" String echo "0xA" + 1 |" Number " Strings are treated like numbers when used as booleans echo "true" ? 1 : 0 |" This string is parsed to 0, which is false -``` +" ########### +" Variables +" ########### +" +" Variables are bound within a scope; if no scope is provided a default is +" chosen by Vim. Use `:let` and `:const` to bind a value and `:unlet` to unbind +" it. -## Variables - -Variables are bound within a scope; if no scope is provided a default is chosen -by Vim. Use `:let` and `:const` to bind a value and `:unlet` to unbind it. - -```vim let b:my_var = 1 |" Local to current buffer let w:my_var = 1 |" Local to current window let t:my_var = 1 |" Local to current tab page @@ -287,7 +278,7 @@ let s:my_var = 1 |" Local to current script file let a:my_arg = 1 |" Function argument (see functions below) " The Vim scope is read-only -echo v:true |" Special built-in Vim variables (:h v:var) +echo v:true |" Special built-in Vim variables (|v:var|) " Access special Vim memory like variables let @a = 'Hello' |" Register @@ -297,7 +288,7 @@ let &l:textwidth = 79 |" Local option let &g:textwidth = 79 |" Global option " Access scopes as dictionaries (can be modified like all dictionaries) -" See the :h dict-functions, especially get(), for access and manipulation +" See the |dict-functions|, especially |get()|, for access and manipulation echo b: |" All buffer variables echo w: |" All window variables echo t: |" All tab page variables @@ -308,33 +299,37 @@ echo a: |" All function arguments echo v: |" All Vim variables " Constant variables -const x = 10 |" See :h :const, :h :lockvar +const x = 10 |" See |:const|, |:lockvar| " Function reference variables have the same restrictions as function names let IsString = {x -> type(x) == type('')} |" Global: capital letter let s:isNumber = {x -> type(x) == type(0)} |" Local: any name allowed -``` -When omitted the scope `g:` is implied, except in functions, there `l:` is -implied. +" When omitted the scope `g:` is implied, except in functions, there `l:` is +" implied. -### Multiple value binding (list unpacking) -```vim +" Multiple value binding (list unpacking) +" ####################################### +" " Assign values of list to multiple variables (number of items must match) let [x, y] = [1, 2] " Assign the remainer to a rest variable (note the semicolon) let [mother, father; children] = ['Alice', 'Bob', 'Carol', 'Dennis', 'Emily'] -``` -## Flow control -### Conditional +" ############## +" Flow control +" ############## -Conditions are set between `if` and `endif`. They can be nested. +" Conditional (|:if|, |:elseif|, |:else|, |:endif|) +" ########### +" +" Conditions are set between `if` and `endif`. They can be nested. + +let condition = v:true -```vim if condition echo 'First condition' elseif another_condition @@ -342,19 +337,19 @@ elseif another_condition else echo 'Fail' endif -``` - -### Loops - -Two types of loops: `:for` and `:while`. Use `:continue` to skip to the next -iteration, `:break` to break out of the loop. -#### For-loop +" Loops (|:for|, |:endfor|, |:while|, |:endwhile|, |:break|, |:continue|) +" ##### +" +" Two types of loops: `:for` and `:while`. Use `:continue` to skip to the next +" iteration, `:break` to break out of the loop. -For-loops iterate over lists and nothing else. If you want to iterate over -another sequence you need to use a function which will create a list. +" For-loop (|:for|, |:endfor|) +" ======== +" +" For-loops iterate over lists and nothing else. If you want to iterate over +" another sequence you need to use a function which will create a list. -```vim " Iterate over a list for person in ['Alice', 'Bob', 'Carol', 'Dennis', 'Emily'] echo 'Hello ' .. person @@ -384,23 +379,21 @@ endfor for [symbol, value] in items({'π': 3.14, 'e': 2.71}) echo 'The number ' .. symbol .. ' is approximately ' .. value endfor -``` -#### While-loops +" While-loops (|:while|, |:endwhile|) -```vim +let there_yet = v:true while !there_yet echo 'Are we there yet?' endwhile -``` -### Exception handling -See `:h exception-handling` -Throw new exceptions as strings, catch them by pattern-matching a regular -expression against the string +" Exception handling (|exception-handling|) +" ################## +" +" Throw new exceptions as strings, catch them by pattern-matching a regular +" expression against the string -```vim " Throw new exception throw "Wrong arguments" @@ -414,14 +407,15 @@ catch /.*/ finally echo 'I'm done trying' endtry -``` -## Functions +" ########## +" Functions +" ########## -### Defining functions +" Defining functions (|:function|, |:endfunction|) +" ################## -```vim " Unscoped function names have to start with a capital letter function! AddNumbersLoudly(x, y) " Use a: scope to access arguments @@ -434,33 +428,31 @@ function! s:addNumbersLoudly(x, y) echo 'Adding' .. a:x .. 'and' .. a:y return a:x + a:y endfunction -``` -Without the exclamation mark it would be an error to re-define a function, with -the exclamation mark the new definition can replace the old one. Since Vim -script files can be reloaded several times over the course of a session it is -best to use the exclamation mark unless you really know what you are doing. +" Without the exclamation mark it would be an error to re-define a function, +" with the exclamation mark the new definition can replace the old one. Since +" Vim script files can be reloaded several times over the course of a session +" it is best to use the exclamation mark unless you really know what you are +" doing. -Function definitions can have special qualifiers following the argument list. +" Function definitions can have special qualifiers following the argument list. -```vim " Range functions define two implicit arguments, which will be set to the range " of the ex-command function! FirstAndLastLine() range echo [a:firstline, a:lastline] endfunction -" Prints the first and last line that match a pattern (:h cmdline-ranges) +" Prints the first and last line that match a pattern (|cmdline-ranges|) /^#!/,/!#$/call FirstAndLastLine() - -" Aborting functions, abort once error occurs (:h :func-abort) +" Aborting functions, abort once error occurs (|:func-abort|) function! SourceMyFile() abort source my-file.vim |" Try sourcing non-existing file echo 'This will never be printed' endfunction -" Closures, functions carrying values from outer scope (:h :func-closure) +" Closures, functions carrying values from outer scope (|:func-closure|) function! MakeAdder(x) function! Adder(n) closure return a:n + a:x @@ -470,7 +462,7 @@ endfunction let AddFive = MakeAdder(5) echo AddFive(3) |" Prints 8 -" Dictionary functions, poor man's OOP methods (:h Dictionary-function) +" Dictionary functions, poor man's OOP methods (|Dictionary-function|) function! Mylen() dict return len(self.data) |" Implicit variable self endfunction @@ -482,11 +474,10 @@ let mydict = {'data': [0, 1, 2, 3]} function! mydict.len() return len(self.data) endfunction -``` -### Calling functions +" Calling functions (|:call|) +" ################# -```vim " Call a function for its return value, and possibly for its side effects let animals = keys({'cow': 'moo', 'dog': 'woof', 'cat': 'meow'}) @@ -496,16 +487,13 @@ call sign_undefine() " The call() function calls a function reference and passes parameters as a " list, and returns the function's result. echo call(function('get'), [{'a': 1, 'b': 2}, 'c', 3]) |" Prints 3 -``` - -Recall that Vim script is embedded within the ex-commands, that is why we -cannot just call a function directly, we have to use the `:call` ex-command. -### Function namespaces +" Recall that Vim script is embedded within the ex-commands, that is why we +" cannot just call a function directly, we have to use the `:call` ex-command. -See `:h write-library-script`, `:h autoload` +" Function namespaces (|write-library-script|, |autoload|) +" ################### -```vim " Must be defined in autoload/foo/bar.vim " Namspaced function names do not have to start with a capital letter function! foo#bar#log(value) @@ -513,68 +501,61 @@ function! foo#bar#log(value) endfunction call foo#bar#log('Hello') -``` -## Frequently used ex-commands +" ############################# +" Frequently used ex-commands +" ############################# -### Sourcing runtime files -See `:h 'runtimepath'` +" Sourcing runtime files (|'runtimepath'|) +" ###################### -```vim " Source first match among runtime paths runtime plugin/my-plugin.vim -``` -### Defining new ex-commands -See `:h 40.2`, `:h :command` -```vim +" Defining new ex-commands (|40.2|, |:command|) +" ######################## + " First argument here is the name of the command, rest is the command body command! SwapAdjacentLines normal! ddp -``` -The exclamation mark works the same as with `:function`. User-defined commands -must start with a capital letter. The `:command` command can take a number of -attributes (some of which have their own parameters with `=`), such as -`-nargs`, all of them start with a dash to set them apart from the command -name. +" The exclamation mark works the same as with `:function`. User-defined +" commands must start with a capital letter. The `:command` command can take a +" number of attributes (some of which have their own parameters with `=`), such +" as `-nargs`, all of them start with a dash to set them apart from the command +" name. -```vim :command -nargs=1 Error echoerr <args> -``` -### Defining auto-commands -See `:h 40.3`, `:h autocmd`, `:h autocommand-events` -```vim +" Defining auto-commands (|40.3|, |autocmd|, |autocommand-events|) +" ###################### + " The arguments are "events", "patterns", rest is "commands" autocmd BufWritePost $MYVIMRC source $MYVIMRC -``` - -Events and patterns are separated by commas with no space between. See `:h -autocmd-events` for standard events, `:h User` for custom events. Everything -else are the ex-commands which will be executed. -#### Auto groups +" Events and patterns are separated by commas with no space between. See +" |autocmd-events| for standard events, |User| for custom events. Everything +" else are the ex-commands which will be executed. -When a file is sourced multiple times the auto-commands are defined anew, -without deleting the old ones, causing auto-commands to pile up over time. Use -auto-groups and the following ritual to guard against this. +" Auto groups +" =========== +" +" When a file is sourced multiple times the auto-commands are defined anew, +" without deleting the old ones, causing auto-commands to pile up over time. +" Use auto-groups and the following ritual to guard against this. -```vim augroup auto-source |" The name of the group is arbitrary autocmd! |" Deletes all auto-commands in the current group autocmd BufWritePost $MYVIMRC source $MYVIMRC augroup END |" Switch back to default auto-group -``` -It is also possible to assign a group directly. This is useful if the -definition of the group is in one script and the definition of the auto-command -is in another script. +" It is also possible to assign a group directly. This is useful if the +" definition of the group is in one script and the definition of the +" auto-command is in another script. -```vim " In one file augroup auto-source autocmd! @@ -582,35 +563,33 @@ augroup END " In another file autocmd auto-source BufWritePost $MYVIMRC source $MYVIMRC -``` -### Executing (run-time macros of sorts) +" Executing (run-time macros of sorts) +" #################################### -Sometimes we need to construct an ex-command where part of the command is not -known until runtime. +" Sometimes we need to construct an ex-command where part of the command is not +" known until runtime. -```vim let line = 3 |" Line number determined at runtime execute line .. 'delete' |" Delete a line -``` -### Executing normal-mode commands +" Executing normal-mode commands +" ############################## +" +" Use `:normal` to play back a sequence of normal mode commands from the +" command-line. Add an exclamation mark to ignore user mappings. -Use `:normal` to play back a sequence of normal mode commands from the -command-line. Add an exclamation mark to ignore user mappings. - -```vim normal! ggddGp |" Transplant first line to end of buffer " Window commands can be used with :normal, or with :wincmd if :normal would " not work wincmd L |" Move current window all the way to the right -``` -## Frequently used functions +" ########################### +" Frequently used functions +" ########################### -```vim " Feature check echo has('nvim') |" Running Neovim echo has('python3') |" Support for Python 3 plugins @@ -633,7 +612,7 @@ echo exists("#BufReadPre#*.gz") |" Event and pattern echo exists("#filetypeindent") |" Auto-command group echo exists("##ColorScheme") |" Auto-commnand supported for event -" Various dynamic values (see :h expand()) +" Various dynamic values (see |expand()|) echo expand('%') |" Current file name echo expand('<cword>') |" Current word under cursor echo expand('%:p') |" Modifier are possible @@ -647,26 +626,26 @@ echo type(my_var) == type(function('type')) |" Funcref " Format strings echo printf('%d in hexadecimal is %X', 123, 123) -``` -## Tricks of the trade +" ##################### +" Tricks of the trade +" ##################### -### Source guard +" Source guard +" ############ -```vim " Prevent a file from being source multiple times; users can set the variable " in their configuration to prevent the plugin from loading at all. if exists('g:loaded_my_plugin') finish endif let g:loaded_my_plugin = v:true -``` -### Default values +" Default values +" ############## -```vim " Get a default value: if the user defines a variable use it, otherwise use a " hard-coded default. Uses the fact that a scope is also a dictionary. -let s:greeting = get(g:, 'my_plugin_greeting', 'Hello') +l ``` |